Panasonic Pt D5700e Projector Specifications

							The 6,000-lm projector that's easy to see
even in brightly lit rooms
	
 
	

6,000lm
XGA
PT- PT- 
						

							1
High brightness and high picture quality
System daylight view High-power 6,000-lm 
brightness
The PT-D5700E/D5700EL offer full 6,000 lumens of 
brightness, thanks to the newly developed AC lamp,  
more efficient reflectors and a synthetic mirror. This 
enables crisp, sharp images even when projecting in 
a classroom, meeting room, or other location with 
ordinary daytime lighting.The system daylight view function uses an image processing circuit to 
compensate for the loss of colour saturation that occurs when light reflects 
onto the screen from bright surroundings. It is especially effective for 
producing crisp, sharp images in dark portions containing gradation. The 
function can be adjusted in three steps.
NEW
Further expanding reliability 
and picture quality
PT-D5700E
PT-D5700EL*
DLP™ 
Projector
High power brightness
6,000 lm
Panasonic's DLP™ system projectors have taken another step 
forward. Now they produce even better images while 
maintaining all of their highly reliable functions. 
Their 6,000-lm brightness delivers crisp, 
easy-to-see images even in brightly lit 
classrooms and meeting rooms, to make 
presentations easier to understand.
Off On
*Without lens model 
						

							Conference rooms Classrooms ChurchesControl roomsProjection of bright, high-quality 
images in large spaces such as 
halls, conference rooms, 
classrooms, control rooms, 
and churches.
2
More effective 
noise reduction
Dynamic 
sharpness controlVivid colour 
control
Progressive cinema 
scan 
(3/2 Pulldown)
A unique control technology is 
used to maximise the colour 
segment areas of the colour 
wheel. Compared to conventional 
projectors, the brightness of each 
colour is increased by an average 
of about 15%. This results in 
sharper, clearer colour 
reproduction.
This interlace/progressive 
conversion technology 
automatically detects when the 
input signal is derived from filmed 
material and selects the optimum 
progressive processing method to 
assure faithful reproduction of the 
original image.
New IP 
conversion 
circuit
The PT-D5700E/D5700EL 
features a new IP conversion 
circuit that produces more 
detailed images than our 
previous models.
Full 10-bit 
picture 
processing
The use of a full 10-bit image 
processing system provides 
smooth tonal expression. For 
example, skin tones appear 
natural and true to life.Images are noticeably clearer, 
thanks to higher-performance 
frame noise reduction, which 
lowers image graininess, and 
improved MPEG noise reduction, 
which suppresses the block noise 
and mosquito noise that are 
common in fast-action scenes.
3D colour 
management system
Compensation provides optimal 
levels of colour saturation, hue, 
and brightness that were not 
possible with conventional 
projectors. Colours approach 
those of the original image, even 
on large-screen displays.The dynamic sharpness control 
circuit adjusts the video signal 
waveforms based on the 
difference in brightness of 
adjacent pixels for a sharp, clear 
picture that is relatively 
unaffected by signal noise.
NEWNEWNEW 
						

							3
NEWWeb browser control/
monitoring and 
e-mail message alert
•Colour matching functionThe Colour Matching function corrects the 
subtle variations in colour reproduction 
between projectors. Originally developed 
''adjustment assist'' software quickly and  
precisely optimises images, so the colours 
on each screen are uniformly reproduced.
•Edge blending functionThis function controls luminance at the 
edges where screens overlap. By eliminating 
unnatural screen joints, it produces 
uniformly attractive multi-screen displays.
•Digital image enlargingImages are enlarged up to 10 times 
(horizontally and vertically) without having to 
use any additional devices.
A lens-centered, symmetrical design provides 
flexible system layout, eliminating the need for 
any special considerations when planning the 
installation site.
Lens-centered design
A wide adjustment range of the horizontal/
vertical lens shift assures distortion free 
images and adds convenience and versatility. 
(Horizontal : manual, Vertical : powered)
Horizontal/
Vertical lens shift
Five optional lenses with different throw 
distances are available in addition to the 
supplied lens. These powered zoom/focus 
lenses enable the projectors to perform 
superbly in an array of projection 
environments.
Optional lenses for 
various venues
The PT-D5700E/D5700EL has an array of terminals-two RGB inputs including a 5-BNC connector, 
serial in/out, one S-video inputs, two remote in, one remote out, DVI-D and control capability-to 
support a broad range of projection needs HDCP. (High-Bandwidth Digital Content Protection) 
compliant. Using the serial terminal(RS232C), it is also possible to connect and operate AMX and 
Crestron control systems with ease.
Multiple terminals
PCPCPC PCPC
Remote control
e-mail
e-mail
Internet
LAN
LAN
PT-D5700E
Anybody can operate the PT-D5700E/
D5700EL by remote control or monitor its 
status over a LAN network, because it is all 
done using the computer’s familiar Web 
browser. Furthermore, the PT-D5700E/
D5700EL sends an E-mail message to notify 
the operator when an error has occurred, 
or a lamp needs to be replaced.
Built-in multi-screen 
support system
Colour matchingEdge blending
With edge blendingWithout edge blending
Overlapping image edges
Projector
Excellent reliability
Flexible system installation
Dual lamp system
The use of two lamp system increases brightness 
and eliminates the need to interrupt a 
presentation if a lamp burns out (in dual lamp 
operation mode).
V50%0
Screen centre
H
+10%
0Screen centre
-10% 
						

							4
NEW
Other valuable features
A mechanical lens shutter minimises annoying 
light leakage when the PT-D5700E/
D5700EL is on standby or temporarily not in 
use, such as during a meeting. 
Mechanical lens shutter
Built-in capacitor provides power to cool the 
internal parts. This means that you can switch 
off the room's main power as soon as the 
presentation ends. PT-D5700E/D5700EL 
doesn't make you wait around and helps 
minimise lamp damage.
Direct power off
Dust filter is replaced from the side and lamps 
are replaced from the back panel.
Both of them are replaced very easily even 
when PT-D5700E/D5700EL is installed.
Easy replacement of 
dust filter and lamp
•ID assignment for up to 65 units
•Coordinated group control for up to 
  26 groups (A-Z)
•Digital vertical keystone correction
•Built-in test pattern
•Selectable 9-language on-screen menu
  (English, German, French, Spanish, Italian,   
   Russian, Japanese, Chinese, Korean)
•Anti-theft features with chain opening
Others
Flexible angle setting
The PT-D5700EL delivers the same performance as the PT-D5700E, but comes without lens. 
Combine it with an optional lens to get the exact performance you need according to usage 
and operating conditions.
The PT-D5700E/
D5700EL can be rotated 
vertically. This means you 
can install it at any up-
and-downangle you wish 
to accommodate different 
installation conditions.
360˚
Panasonic works from every angle to minimise environmental impact in the product design, 
production and delivery processes, and in the performance of the product during its life 
cycle. The PT-D5700E/D5700EL reflects the following ecological considerations.
• No halogenated flame retardants are used in the cabinet.
• Lamp power switching further reduces power consumption.
• Auto Power Save activates standby mode when no signal is input.
Ecology-conscious design
Micro cut filter
A filter in the air intake section traps dust 
particles that are 10 microns* or larger. By 
capturing approximately 7 times as much dust 
as conventional filters, it guards against optical 
blocks and reduces the penetration of dust into 
the interior to provide 
stable operation by, for 
example, preventing 
drops in brightness.
*10-micron dust = lint, 
pollen, etc.
Liquid-cooling system
Panasonic's original liquid-cooling system 
directly cools the DLP™ chip, which extends 
PT-D5700E/D5700EL performance and attains a 
high level of reliability. It also enables operation 
in temperatures up to 
45˚C/113 ˚F for use in a 
wider variety of environments, and maintains a 
more stable performance even in harsh 
conditions while keeping the operating sound 
down to a quiet 29 dB*.
*with lamp mode: low
Dust-resistant 
optical block
The dust-resistant design of the optical block 
helps ensure that projectors with DLP™ 
technology will continue to deliver crisp, sharp, 
high resolution images over an extended 
service life.
Micro cut filter
AC lamp
Radiator
Reserver tank
Cooling directly
DLP™ chip
Newly developed AC lamps with full 275 
watts of power offer excellent brightness and 
greater reliability than other types. A new lamp 
drive system also lowers the stress on the lamp 
electrodes while the lamps are lit. The new 
lamps have a lifetime of approximately 3,000 
hours*, which is reassuring for applications 
where the projector is frequently used. The AC 
lamps also minimise colour irregularities.
NEW
The LAN terminals support PJLink™ class 1 
connection. Control with the same specifications 
is also possible when usedin a multi-projector 
system with projectors of 
another brand.
PJLink™ compatibility
Panasonic's original ''Multi Projector 
Monitoring & Control Software''* freeware 
allows the user to control and monitor 
multiple projectors via LAN. When a problem 
occurs, an alarm message is sent 
to the controlling/
monitoring PC.
* Available in June 2008. 
Please consult a sales 
representative if necessary.
Multi projector 
monitoring & 
control software
Control panel and 
wireless remote 
control
The PT-D5700E/D5700EL 
uses the bayonet system, so 
lenses attach and detach 
with one-touch ease.
Easy lens replacement
The rear control panel allows for easy 
operation when the PT-D5700E/
D5700EL is set on a desk or floor. 
New wireless remote control with 
longer transmission capacity of 30 m.
NEW
* The indicated figure is the maximum value when two 
lamps are used in Lamp Low mode, with operating cycles 
of 3.5 hours ON and 0.5 
hour OFF. If the 
frequency of operation 
increases, the lamp 
replacement cycle will 
become shorter. [It is 
recommended that 
the mechanical shutter 
be used to turn images 
off for a short period.] 
						

							NOTES ON USE1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. 
    Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, 
    emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the 
    following precautions.
    • Never place objects on top of the projector while it is operation.
    • Make sure there is an unobstructed space of 500 mm or more around the projectors exhaust openings.
    • Do not stack projector units directly on top of one another for the purpose of multiple (stacked) 
        projection. When stacking projector units, be sure to provide the amount of space indicated between 
        them. These space requirements also apply to installation where only one projector unit is operating at 
        one time and the other unit is used as a backup.
    • If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be 
        between 0 ˚C and 35 ˚C. Also make sure the projectors intake and exhaust openings are not blocked. 
        Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake 
        openings.
         * Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air 
         inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample 
         consideration to the design with regard to ambient temperature conditions.
4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical systems 
    alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 
    hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per day if the 
    using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short 
    periods.
    • The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on 
        individual lamp characteristics and usage conditions.
    • The brightness of the lamp will gradually decrease with use.
6. Please clean the filter regularly. As for details, please refer to the operation manual.
Optional accessories
Replacement Lamp Unit
ET-LAD57
ET-LAD57W (twin pack)
Zoom Lens (1.3-1.8:1)
ET-DLE100
Zoom Lens (2.4-4.0:1)
ET-DLE200
Zoom Lens (3.5-4.4:1)
ET-DLE310
Zoom Lens (4.5-8.4:1)
ET-DLE410
Fixed Focus Lens (0.8:1)
ET-DLE050Ceiling Mount Bracket
for low ceiling
ET-PKD55S Ceiling Mount Bracket
for high ceiling
ET-PKD56H
Specifications
 	

 		  
    	

	
 	
 

 

 	 	
	 	
 	  
 	
 
 


 
 	  
 
 	


 		
 	 
  
 		  
 		  	 
 	


  !
 
 !		
 #
 	 
 	 	
 
 

 	
 		
$% 	
 &% 	 		 
 

	
	 (
 )	
 *

	

 
 		 	  
 
  		 

  

 	 	
+  + 

 	
 + )	
 

 	 		 
  		 
 	 


,*- .//0  	
	
 *

	
   
 	
	 	      
  1+23//451/06
./7  
 
 !		

System
Device
Pixels
Lamp
Brightness (normal lamp)*
1Contrast ratio*1Resolution  
Lens
    PT-D5700E
    PT-D5700EL
Screen size
Lens shift
RGB input scanning
    frequency
Component signal
Video signal
Terminals  
    VIDEO IN
    S-VIDEO IN
    RGB1/YP
BPR IN
    RGB2 IN
    DVI-D IN
    RS-232C IN
    RS-232C OUT
    REMOTE 1 IN
    REMOTE 1 OUT
    REMOTE 2 IN
    LAN 
Keystone correction range
Installation 
Power cord length
Power supply
Power consumption
Dimensions (W x H x D)
Weight*
2    PT-D5700E
    PT-D5700EL
Operating temperature
Operating humidity
Supplied accessoriesDLP™ Projection system
0.7 (diagonal) DLP™
  chip 4:3
786,432 (1,024 x 768) x 1 total of 786,432 pixels
275 W UHM lamp x 2 (Dual Lamp System)
6,000 lumens (dual lamp, high power mode)
2,000:1 (full on/full off, contrast mode: high)
1,024 x 768 pixels
Powered zoom/focus lens, 
Supplied lens: (1.8-2.4:1)
F = 1.7-2.0, f = 25.6-33.8 mm
Optional powered zoom/focus lenses
50 - 600 inches
Vertical: ±50% (powered), Horizontal: ±10% (manual)
f
H 15-91 kHz, fV 50-85 Hz
Dot clock 150 MHz or lower
480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 
1080/60p 1080/50i, 1080/50p
NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
BNC
Mini DIN 4-pin
BNC x 5
D-sub HD 15-pin
24pin DVI 1.0 compliant, HDCP compatible, for single link
D-sub 9-pin female
D-sub 9-pin male
M3 jack
M3 jack
D-sub 9-pin female (parallel)
RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
±30˚ (with standard lens)
Front/rear, ceiling/floor
3.0m (9.9)
220-240 V AC, 50 / 60 Hz
750 W (790 VA) (15 W during standby mode with fan stopped)
530 x 167 x 429 mm (20-7/8 x 6-9/16 x 16-7/8) (without lens)
Approx. 13.9 kg (30.6 lbs) with supplied lens
Approx. 13.1 kg (28.9 lbs) without lens
0 -45 ˚C (32 -113 ˚F)
20-80% (no condensation)
Power cord, Wireless/wired remote control unit,
AA Batteries (x 2) for remote control, Wire rope
Dimensionsunit: mm [inch]
8 *9 ()#550:%(.;$++(= (%=