Panasonic Pv Gs120 Operating Instructions Manual

							Editing Mode
-51-
Editing Mode
Recording from a Tape onto a Card 
Still pictures or moving pictures can be recorded 
on a Memory Card from scenes that have already 
been recorded on a cassette. (moving pictures on 
PV-GS200 Model only)
1Set the Mode Dial (39) to Tape Playback 
Mode.
2Still Picture:
Start playback and set the Camcorder to 
Still Playback Mode at the scene you wish 
to record, and press the [PHOTO SHOT] 
Button 
(47).
Moving Picture (PV-GS200 only):
Start playback and press the Recording 
Start/Stop Button 
(42) at the desired scene.
Recording Pictures from a Card onto 
a Tape
Card Images can be recorded to a Tape.1Set the Mode Dial (39) to Picture Playback 
Mode.
2Display the first picture.3Press the [PHOTO SHOT] Button (47).
PCSD(39)
PHOTO
SHOT(47)
(42)
PC
SD(39)
PHOTO
SHOT(47)
≥During the copying, the following Indication 
appears.
≥It takes a few seconds to record a picture to 
the Tape.
≥When recording to tape, select the tape position 
before recording. The picture will be recorded to 
the tape position when the [PHOTO SHOT] 
Button is pressed at Step 3.
≥Photoshot index signals are automatically 
recorded.
≥Moving pictures (MPEG) can be recorded from 
a card to a tape on the PV-GS200 model only.
≥For other notes concerning this item, see 
-77-. 
Audio Dubbing
You can add music or narration to the recorded 
Cassette.
≥If a tape recorded in the [16bit] Mode is dubbed 
with the Audio Dubbing function, the original 
sound is erased. (If you wish to preserve the 
original sound, use the [12bit] Mode when 
recording.)
≥Audio Dubbing cannot be performed on a 
recording made in LP Mode. (
-26-)1Set [TAPE PLAYBACK MENU] >> 
[AV IN/OUT] >> [AV JACK] >> [IN/OUT].
2Next, select [A.DUB INPUT] >> [MIC] or 
[AV IN].
≥Set to [AV IN] when an external device is 
used, and to [MIC] when an external or 
built-in microphone is used.
3Press the [;] Button (76) on the Remote 
Controller where you want to add new 
sound.
4Press the [A.DUB] Button (62) on the 
Remote Controller.
NOW RECORDING
STILL
ENTERFA D E
MENU
i s
(14)
INDEX INDEX
SELECT
STOPKL∫
V/REW
STILL ADV
T
WsVOLr¥REC MULTI/
P-IN-PA.DUB
PLAY
PAUSE
FF/W
STILL ADV61 5
;EDP.B. ZOOM
(62)
(76)
PV-GS120_200Eng.book  51 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							Editing Mode
-52-
5To start Audio Dubbing, press the [;] 
Button (76) on the Remote Controller.
To Cancel Audio DubbingPress the [;] Button (76) on the Remote 
Controller.
The Camcorder is in the Still Playback Mode 
again.
To Play Back the Sound Recorded by 12bit 
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK] 
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio 
Dubbing.
MIX: It plays back both the original sound and the 
sound added by Audio Dubbing 
simultaneously.
To Dub Audio While Listening to a 
Pre-recorded Sound
When pausing the audio dubbing, set the 
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to 
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing, 
use headphones to listen to the pre-recorded 
sound while dubbing the audio. (When using 
headphones, set [AV JACK] to [OUT/PHONES].) 
When the line input is used, you can dub audio 
while listening to the pre-recorded sound from the 
speaker.
≥For other notes concerning this item, see 
-77-.
Copying on an S-VHS (or a VHS) 
Cassette
(Dubbing)
After connecting the Camcorder and the VCR 
as illustrated, start the following procedures.
1 AV Cable
2 S-Video Cable
≥Be sure to press the [OSD] Button (
-14-) on the 
Remote Controller prior to copying so that no 
indications are visible. Otherwise, the displayed 
tape counter and function indications are also 
copied.
Camcorder:
1Insert the recorded Cassette.
VCR:
2Insert an unrecorded Cassette with an 
erasure prevention tab.
≥If various setups (such as external input, tape 
speed, etc.) are required, please refer to the 
operating instructions of your VCR.
Camcorder:
3Press the [1] Button (17) to start playback.
VCR:
4Start recording.5Press the Pause or Stop Button to stop 
recording.
Camcorder:
6Press the [∫] Button (18) to stop playback.
AV IN/OUT
PHONES
S-VIDEO
IN/OUT
1 2
[VIDEO IN]
[AUDIO IN] [S-VIDEO IN]
DV
PV-GS120_200Eng.book  52 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							Editing Mode
-53-
Recording the Contents of Other 
Equipment
After connecting the Camcorder and the other 
equipment as illustrated, start the following 
procedures.
1 AV Cable
2 S-Video Cable
Camcorder:
1Set [TAPE PLAYBACK MENU] >> 
[AV IN/OUT] >> [AV JACK] >> [IN/OUT].
2Insert an unrecorded Cassette.
Other Equipment:
3Insert a recorded Cassette and start 
playback.
Camcorder:
4While pressing the [¥REC] Button (61), 
press the [1] Button (79) on the Remote 
Controller.
Or while pressing the [REC] Button 
(7), 
press the [BACK LIGHT] Button (8) on the 
Camcorder.
AV IN/OUT
PHONES
S-VIDEO
IN/OUT
2
[S-VIDEO OUT]
1
[VIDEO OUT]
[AUDIO OUT]
DV
STILL
ENTERFA D E
MENU
i s
(14)
INDEX INDEXSTOPKL∫
V/REW
STILL ADV
T
WsVOLr¥REC MULTI/
P-IN-PA.DUB
PLAY
PAUSE
FF/W
STILL ADV61 5
;EDP.B. ZOOM
(61)
(79)
(76)
(77)
≥When recording on a card, press the 
[PHOTO SHOT] Button or the Recording 
Start/Stop Button.
5Press the [;] Button (76) or [∫] Button (77) 
to stop recording.
Other Equipment:
6Press the Stop Button to stop playback.
≥For other notes concerning this item, see 
-77-.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Camcorder with other digital 
video equipment (such as another Camcorder of 
the same format/model) that has a DV 
input/output terminal, and using a 4-pin to 4-pin 
DV Interface cable PV-DDC9/PV-DDC9-K 
(optional) 1, high quality images and sounds can 
be dubbed in the digital mode.
Player/Recorder:
1Insert the Cassette and set to Tape 
Playback Mode.
Player:
2Press the [1] Button (79) to start playback.
RECBACK LIGHT
(7)
(8)
1
DV
INDEX INDEXSTOPKL∫
V/REW
STILL ADV
T
WsVOLr¥REC MULTI/
P-IN-PA.DUB
PLAY
PAUSE
FF/W
STILL ADV61 5
;EDP. B .  Z O O M
(61)
(79)
(76)
(77)
RECBACK LIGHT
(7)
(8)
PV-GS120_200Eng.book  53 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							Editing Mode
-54-
Recorder:3While pressing the [¥REC] Button (61), 
press the [1] Button (79) on the Remote 
Controller.
Or while pressing the [REC] Button 
(7), 
press the [BACK LIGHT] Button (8) on the 
Camcorder.
≥Recording starts.
To Stop DubbingPress the [;] Button (76) or the [∫] Button (77).
≥For other notes concerning this item, see 
-78-.
PC Connection With DV Interface 
Cable
A video clip can be transferred directly to your PC 
(Personal Computer) via a DV Interface Cable 
(optional) using products and software from a 
number of video editing software companies.
Using products from video editing software 
companies allows you to capture and edit video 
clips using the DV Interface.
Our DVC being OHCI compliant should have 
no problem working with any OHCI compliant 
Firewire Card/Video — Editing software 
package.
≥Personal Computer must be equipped with an 
DV Terminal.
≥During Camcorder playback, do not disconnect 
the DV Interface Cable or turn the Camcorder 
off as this may cause a PC hang-up error.
≥1394 (i. LINK) Interface must conform to OHCI 
(Open Host Controller Interface Specification).
≥DV STUDIO 3.1E-SE allows you to capture a 
still image from your motion video on the tape 
and transfer it to a PC with USB Cable.
CAUTION:Unauthorized exchanging and/or copying of 
copyrighted recordings may be copyright 
infringement.
DV
Printing pictures by directly 
connecting to the printer 
(PictBridge)
After connecting the Camcorder with a printer 
compatible with PictBridge, start the following 
procedures.
≥To print pictures by directly connecting the 
Camcorder to the printer, prepare a printer 
compatible with PictBridge. (Also read the 
operating instructions of the printer.)
≥You cannot print images which cannot be played 
on the Camcorder.
≥Check the settings for the paper size, quality of 
print, etc. on the printer.
≥We recommend using the AC Adaptor as the 
power source.
1Set the Mode Dial (39) to Picture Playback 
Mode.
2Connect the printer with the supplied USB 
Cable.
1 USB Cable
≥The [PRINT] Indication appears on the screen 
of the Camcorder.
Highlighted: Printable
Blinking: Printer is being recognized.
PC
SD(39)
AV IN/OUT 
PHONES
REMOTE/MIC(PLUG IN POWER)
1
PRINT
PV-GS120_200Eng.book  54 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							Editing Mode
-55-
≥The [PRINT] Indication does not appear when 
the card is not inserted in the Camcorder. (You 
cannot print pictures.)
≥When the [PRINT] Indication keeps blinking 
(more than about 1 minute), the Camcorder and 
the printer are not connected properly. Connect 
the cable again or check the printer.
≥When the Camcorder and the printer are 
connected in the Tape Recording/Playback 
Mode, the [WEB ] or the [WEB ] 
Indication may appear on the LCD Monitor. 
However, images cannot be printed.
3Select the desired picture and press the 
[ENTER] Button (17).
≥Images cannot be printed when they are 
displayed in Multi-screen.
4When printing with date:
Set [PICTURE PLAYBACK MENU] >> 
[PRINT] >> [DATE] >> [ON].
≥You cannot set date printing when the printer 
does not support it.
≥Proceed to the next step if you do not need 
date printing.
5Set [PICTURE PLAYBACK MENU] >> 
[PRINT] >> [THIS PICTURE] >> a desired 
paper size.
≥You cannot set a paper size which is not 
supported by the printer.
6Press the [5] Button (16) or [6] Button (19) to select a desired number of prints.
≥You can set the number of prints up to 9.
FA D E
STILL
ENTERi s(17)
STILL
ENTERFA D E
MENU
i s
(14)
STILL
ENTERFA D E
MENU
i s
(14)
ENTERFA D E
STILL
i s
(19)        (16)
7Press the [ENTER] Button (17).
If you want to stop printing halfwayPress the [∫] Button (18).
≥Do not operate as follows during printing, 
pictures cannot be printed properly.
≥Disconnecting the USB cable
≥Removing the Card
≥Switching the operation mode
FA D E
STILL
ENTERi s(17)
PV-GS120_200Eng.book  55 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							With a PC
-56-
With a PC
Using the Software with a Computer
An image stored on the DV Cassette can be 
transferred to your Personal Computer.
ªSoftware Installation (Windows)1Turn on Computer and start up Windows.2Insert supplied CD-ROM into the CD-ROM 
drive.
≥[Setup Menu] appears.
3Select the software to be installed from 
[Setup Menu].
≥USB Driver 
-56-:
Software for USB Driver allows you to 
transfer images directly from the Memory 
Card into the computer.
≥WebCam Driver 
-58-:
If the Camcorder is connected to your 
personal computer, you can send video from 
the Camcorder to the other parties via a 
network or by Internet.
≥DV STUDIO 3.1E-SE 
-60-:
Using the DV STUDIO 3.1E-SE software 
allows you to capture stills from video 
recorded on a tape or still images viewed 
through the lens of a camera.
≥G.726 Audio Decoder 
-61-:
Software for G.726 Audio Decoder allows you 
to listen to MPEG4° sound with Windows 
Media Player.
°MPEG4 moving picture files can be recorded 
by PV-GS200 only.
≥ArcSoft Software 
-62-:
PhotoImpression 4.0, PhotoBase 4.0, 
Panorama Maker 3.0 and PhotoPrinter 4.0 
are included.
≥Windows Media Update
This update was provided by Microsoft 
Corporation. Run this update in cases where 
playback of an MPEG4 moving picture file 
recorded with a Camcorder is started in 
Windows Media Player, but ends with an error 
message after 3 to 4 minutes.
4Follow the instructions on the computer 
screen until the installation is complete.
≥Setup window will disappear when the 
installation is complete.
Note:
If a window does not appear automatically, click 
the “Start” Button on your desktop and then click 
“Run”. When the “Run” Box is open, type in 
“D:\InstMenu.exe” and click “OK”. (“D” is used 
when the CD-ROM drive is drive D.)
Using USB Driver
ªOperating environment≥Despite having the operating environment 
indicated, it may not be possible to use the 
program with some types of personal 
computers.
≥A CD-ROM drive is required to install this 
program.
OS:
IBM PC/AT compatible personal computer with 
pre-installed; 
Microsoft Windows XP Home Edition/ 
Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition 
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
(128 MB or more required for Windows XP)
Free hard disk space:
At least 30 MB or more
Ports:
USB Terminal
ªInstalling USB DriverPlease install USB Driver first before connecting 
the Camcorder to your Personal Computer with 
the USB Connection Cable.
1Turn on the Personal Computer and start up 
Windows.
2Insert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3Click the [USB Driver].
≥The set up program starts running.
4For Windows 98SE/Me/2000 users, click 
[Restart] if the [InstallShield] dialog 
appears.
≥Do not remove the CD-ROM.
5Finish installation by following the 
on-screen instructions.
≥Click [Next] and proceed with installation.
≥After completing the installation, Click 
[Finish].
6After the USB Driver is installed, please 
restart your computer.
PV-GS120_200Eng.book  56 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							With a PC
-57-
≥Reboot the computer to finish installing USB 
driver.
≥Installation continues after the computer 
reboots if you selected additional software.
≥A message indicating a conflict between 
versions may be displayed during the 
installation. This will not cause a problem. 
Simply click [Yes] to proceed with the 
installation.
≥Depending on the OS version, illustrations and 
icon names may vary.
For Windows 2000 UsersThe conflict message is displayed during 
installation. However, testing by the manufacturer 
has confirmed functionality of this Camcorder 
with Windows 2000. Click [Yes] and proceed.
7Click [OK] when the [Restarting Windows] 
Dialogue box appears.
ªConnecting Computer and CamcorderInstall USB Driver before connecting.
Never connect the USB Connecting Cable 
until the USB Driver is installed.
Before making these connections, turn off all 
devices which are to be connected.
≥When using the USB Connection Kit, it is 
recommended that you use the AC Adaptor as 
the power supply of the Camcorder.
ªFor Using Built-in SD DriveBy connecting the Camcorder and Personal 
Computer with the USB Cable, you can transfer 
still images saved on a Memory Card directly to 
your Personal Computer.
For Windows1Insert the Memory Card into the Camcorder.2Set the Camcorder to PC Mode.
3Connect the Camcorder to your personal 
computer with USB Cable.
≥It enters PC Connecting Mode.
PCSD
4Open [My Computer] and click 
[Removable Disk] (For Windows 98SE/Me/ 
2000 users).
Click [Open folder to view files using 
Windows Explorer] and then [OK] (For 
Windows XP users).
≥You can view images stored on the Memory 
Card and also save them to your hard disk.
≥Please do not change file or folder names on 
the Personal Computer. The images on the 
Memory Card may then not be viewable on 
the Camcorder.
≥After making the connections, turn the 
connected equipment on.
≥Appropriate driver to recognize Camcorder is 
automatically installed by Windows Plug and 
Play when connected for the first time.
≥After the USB Driver is installed and USB 
Connection Cable is connected to the 
Camcorder, open [My Computer] or 
[Windows Explorer] to check that the drive is 
displayed as a removable disk drive (only when 
card is inserted into the Camcorder). It enables 
you to operate it in the same way as a floppy 
disk drive, and you can use the same drag and 
drop or copy methods.
For MacintoshOS:
Mac OS X v 10.1 – X v 10.2
CPU:
PowerPC
RAM:
64 MB or more
1Insert the Memory Card into the Camcorder.2Set the Camcorder to PC Mode.
3Connect the Camcorder to your Macintosh 
with USB Cable.
4Double click the “NO_NAME” icon.
≥You can view images stored on the Memory 
Card and also save them to your hard disk.
≥Please do not change file or folder names on 
the Personal Computer. The images on the 
Memory Card may then not be viewable on 
the Camcorder.
PCSD
PV-GS120_200Eng.book  57 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							With a PC
-58-
Using as a Web Camera
If the Camcorder is connected to your personal 
computer, you can send video and sound from 
the Camcorder to other parties via the network. 
(You can use the microphone equipped with the 
personal computer instead of the one on the 
Camcorder.)
≥Do not connect the USB Cable until the USB 
Driver or WebCam Driver is installed.
This feature can be used only if both parties 
are using the same operating system. Please 
see chart below:
ªOperating environmentOS:
IBM PC/AT compatible personal computer with 
preinstalled
Microsoft Windows XP Home Edition/ 
Professional
(In this case Windows XP SP1 or later is needed.)
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition 
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
(128 MB or more required for Windows XP)
Free hard disk space:
At least 250 MB or more
Ports:
USB Terminal
To use the Camcorder as a Web Camera, the 
additional minimum requirements must be 
met.
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
Communication Speed:
56 kbps or faster is recommended
Necessary software:
Windows Messenger 5.0 or later (Windows XP)
MSN Messenger (Windows 98SE/Me/2000)
Other requirements (to send/receive audio):
Sound card
Speaker or headphones
[Send] [Receive] [Software]
Windows XPWindows XP Windows 
Messenger
Windows XPWindows 
98SE/Me/
2000
Windows 
98SE/Me/ 
2000Windows 
98SE/Me/ 
2000MSN 
Messenger
To use the Camcorder as a Web Camera, the 
following conditions must be met.
≥In this case, Windows XP SP1 or later is 
needed.
≥To upgrade Windows XP to SP1, click [Start] >> 
[All Programs] >> [Windows Update]. (Requires 
Internet connection.)
≥You have direct dial-up connection capability to 
the Internet (minimum requirement). Also, you 
and the other person(s) are on the same 
Network (LAN).
≥Install Windows Messenger (Windows XP) or 
MSN Messenger (Windows 98SE/Me/2000). If 
you have a version older than 5.0, please 
download the latest version (5.0 or later) from 
the Microsoft Home Page.
http://www.microsoft.com/
http://www.msn.com/
(For download and installation instructions, 
please refer to Help on the Home Page.)
≥Install Windows Messenger or MSN 
Messenger. 
≥If the installed version is not the latest, update it 
by performing the Windows update.
≥If you are connected to the Internet through a 
firewall or a router, proper communication will 
not be possible.
≥The installer is available only in English but can 
be used on operating systems using other 
languages.
≥When DirectX 9.0 is installed, applications 
supported by previous versions of DirectX may 
not run.
ªInstalling WebCam Driver
1Insert the supplied CD-ROM into the 
personal computer’s CD-ROM drive.
≥Quit all applications.
≥The [Setup] screen appears.
2Click [WebCam Driver]
≥The set up program starts running.
3For Windows XP users:
Depending on your system environment, 
installation of “DirectX 9.0b” may be 
required. Click [Yes] and continue with 
installation.
≥After “DirectX 9.0b” is installed, the computer 
will restart.
≥Do not remove the CD-ROM.
≥Installation may take a little while.
4Finish installation by following the 
on-screen instructions.
≥Click [Next] and proceed with installation.
≥After completing the installation, Click 
[Finish].
5Click [OK].
PV-GS120_200Eng.book  58 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							With a PC
-59-
ªConnecting the Camcorder to 
Personal Computer (For Use as a Web 
Camera)
1
Install the supplied WebCam Driver on the 
provided CD-ROM.
2Set the Mode Dial to Tape Recording Mode.3Set [CAMERA] >> [USB FUNCTION] >> 
[WEB CAMERA].
≥It enters WEB CAMERA Mode.
≥To send pictures recorded on a tape to 
another personal computer using Windows 
Messenger or MSN Messenger, set 
[PLAYBACK] >> [USB FUNCTION] >> 
[WEB CAMERA] on Tape Playback Mode 
before connecting the Camcorder to your 
personal computer.
4Connect the Camcorder to personal 
computer with auxiliary USB Connection 
Cable.
≥When the Camcorder and personal 
computer (with Windows 2000) are 
connected via USB Cable, a message, such 
as the one below, is displayed. However, 
testing by the manufacturer has confirmed 
functionality of this Camcorder with 
Windows 2000. Click [Yes] and proceed.
≥For Windows 98SE/Me users, “USB Audio 
Device” is required. Click [Next] and 
proceed.
For Windows 98SE/Me UsersThe following messages may be displayed during 
the installation depending on the environment of 
the personal computer. Install the USB Driver as 
instructed below. Otherwise, it won’t be installed 
correctly.
1) The message “The file ‘kstvtune.ax’ on 
[Unknown] cannot be found...” is 
displayed.
STILL
ENTERFA D E
MENU
i s
(14)
≥Enter “C:\Windows\system” for 
Windows 98SE.
≥Enter “C:\Windows\options\CABS” for 
Windows Me.
≥If the “kstvtune.ax” file is missing in one of 
the 2 above-mentioned folders, insert the 
OS CD-ROM and assign the path.
2) The message “The file ‘ksclockf.ax’ on 
[Unknown] cannot be found...” is 
displayed.
≥Enter “C:\Windows\system”.
≥If the “ksclockf.ax” file is missing in the 
above mentioned folder, insert the OS 
CD-ROM and assign the path.
≥You may click [Browse] to look for and assign 
the path.
5Start Windows Messenger or MSN 
Messenger.
≥Click [Start] >> [All Programs (Programs)] >> 
[Windows Messenger] or [MSN Messenger].
≥When you use Windows XP, the other parties 
via the network have to use Windows 
Messenger on Windows XP. When you use an 
operating system other than Windows XP, the 
other parties via the network have to use MSN 
Messenger on an OS other than Windows XP.
≥If the Camcorder is used as a Web Camera, the 
quality of the video to be exchanged will depend 
on the Internet connection status.
≥If the USB Connection Cable is disconnected 
from the personal computer, WEB CAMERA 
mode is cancelled.
≥In the WEB CAMERA mode, video cannot be 
recorded onto a tape or a card.
≥You cannot output the video input from the DV 
terminal to the display of the PC.
≥In the WEB CAMERA mode, the audio may be 
interrupted in the middle of communication 
depending on the communication environment 
or the performance of the personal computer.
ªSetting up Windows MessengerWhen starting Windows Messenger for the first 
time, its setup screen is displayed. (However, the 
screen is not displayed if the Windows 
Messenger setup has already been done.)
1Click [Click here to sign in].
2Select [.NET Messaging Service] and click 
[OK].
PV-GS120_200Eng.book  59 ページ  ２００４年２月１６日　月曜日　午後１時３２分 
						

							With a PC
-60-
3After the .NET Passport Wizard is 
displayed, click [Next].
≥Please refer to the instruction manual of your 
personal computer for how to configure the 
audio and the microphone.
≥To communicate with persons using 
Windows in other languages, setting up using 
alphabets or numbers is recommended.
4According to the procedures displayed on 
the screen, continue the setup.
5After the setup is completed, sign in and 
start Windows Messenger.
≥Windows Messenger is activated.
6Click on [Audio Tuning Wizard...] in the 
[Tools] menu to confirm that equipment is 
connected correctly.
7Select [USB Video Device] in the [Camera] 
menu.
8Select [DVC] in the [Microphone] menu.
≥Please refer to the HELP file of Windows 
Messenger for understanding its operation.
≥During set up, if [Primary video capture 
device] selection screen is displayed, 
[Panasonic DVC Web Camera] is selected.
ªSetting up MSN MessengerWhen starting MSN Messenger for the first time, 
its setup screen is displayed. (However, the 
screen is not displayed if MSN Messenger setup 
has already been done.) For more details, please 
read the corresponding Help file.
1Click [Sign In].
2Type in your Sign-in name and password.
≥If you do not have your Sign-in name and 
password, click [Get one here] 
3Please carefully read the displayed 
contents and then proceed.
4After the setup is completed, sign in and 
start MSN Messenger.
5Click on [Audio Tuning Wizard...] in the 
[Tools] menu to confirm that equipment is 
connected correctly.
6Select the microphone attached to the PC in 
the [Microphone] menu.
7Click [Web Camera Settings...] in the 
[Tools] menu.
8Confirm that the [Panasonic DVC Web 
Camera Device] is selected.
≥Depending on the operating environment, 
WebCam may not function even if WebCam 
button is pressed. In this case, right click the 
Online icon and select [Start a Video 
Conference]. You can then use the video 
conference feature.
≥For other information about MSN Messenger, 
please refer to Help.
≥When access is finished, close MSN 
Messenger, then turn off the Camcorder. 
Finally, disconnect the USB Cable.
Using DV STUDIO 3.1E-SE
ªOperating environmentOS:
IBM PC/AT compatible personal computer with 
pre-installed
Microsoft Windows XP Home Edition/ 
Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition 
CPU:
Intel Pentium II/Celeron 300MHz or higher 
(including compatible CPU)
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
RAM:
32 MB or more (64 MB or more is recommended)
(128 MB or more are required for Windows XP 
(256 MB or more is recommended))
Free hard disk space:
At least 20 MB
Ports:
USB Terminal
Other requirements:
Mouse
PV-GS120_200Eng.book  60 ページ  ２００４年２月１６日　月曜日　午後１時３２分