Panasonic Sc Bt230 Operating Instructions

							Getting started 
21
VQT2M13
Network Easy Setting (Internet Connection Check)
	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >38)
≥ You can redo these settings individually using “Network”. ( >38)
≥
[BT730] [BT330] [BT230] Do not use this device to connect to any 
wireless network for which you do not have usage rights.
During automatic seaches in a wireless network environment, wireless 
networks (SSID*) for which you do not have usage rights may be 
displayed; however, using these networks may be regarded as illegal 
access.
≥
[BT730] [BT330] [BT230] After performing network settings on this unit, 
the settings (encryption level, etc.) of the Wireless router (Access point) 
might change. When you have trouble getting online on your PC, perform 
the network settings on your PC in accordance with the settings of 
Wireless router (Access point).
* An SSID (Service set IDentification) is a name used by wireless LAN to  identify a particular network. Transmission is possible if the SSID matches 
for both devices.
Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen 
is displayed.
If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.net/support/
(This site is in English only.)
To show the firmware version on this unit. ( >38, “System 
Information”)
DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.
	≥ You can perform  update anytime by selecting “Firmware Update” in the 
Setup menu. ( >38)
≥ Downloading will require several minutes. It may take longer or the Internet 
may not be connected depending on the connection environment. 
≥ If you do not want to check for the latest firmware version, set “Automatic 
Update Check” to “Off”. (> 38)
1. LAN cable connection or 
Connection to access point :Pass
≥Connection 
and settings 
of the hub 
and router
≥ Settings of 
IP Address / 
DNS 
Settings“ 
(> 38)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Connection to access point
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
DisplayCheck the following
Cannot find the server.
(Error code: B019) ≥
“Primary DNS” and “Secondary 
DNS” Settings of “IP Address / 
DNS Settings” ( >38)
Failed to connect to 
the server.
(Error code: B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” (> 38) and the router.
OK
Network Easy Setting (Internet Connection Check)Complete.
- Connection to the Internet       :   Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
Firmware updates
Firmware Update
  Latest Online Version: x.xx
  Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
RETURNOK
Ye s No
The firmware was updated.Current Installed Version: x.xx
RETURNOK
SC-BT230_330_730P_PC_VQT2M13_eng.book  21 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							22
VQT2M13
STEP 7: 
Reprogramming the 
remote control
When other Panasonic products respond to this 
remote control
Change “Remote Control Code” (>38) on the main unit and 
the remote control (the two must match) if you place other 
Panasonic products close together and it responds to this 
remote control.
To change the code on the main unit.
1While stopped, press [START].
2Press [ 3,4] to select “Other Functions” 
and press [OK].
3Press [ 3,4] to select “Setup” and press 
[OK].
4Press [ 3,4] to select “Others” and press 
[OK].
5Press [ 3,4] to select “Remote Control 
Code” and press [OK].
6Press [ 3,4] to select the code (1 or 2) and 
press [OK].
To change the code on the remote control.
1While pressing [OK]
Press and hold the numbered button 
(1 or 2), which has the same number you 
selected in the step 6 for more than 5 
seconds.
2Press [OK].
Inserting or removing a 
media
≥ When inserting a media, ensure that it is facing the right way 
up.
≥ While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the medias contents.
≥ When removing the SD card, press on the center of the card 
and pull it straight out.
∫ To switch sources
Press [BD/SD] to select “BD/DVD” or “SD”.
≥If a media is inserted while the unit is stopped, the source 
switches automatically depending on the inserted media.
SD CARDSETUP MIC
SC-BT230_330_730P_PC_VQT2M13_eng.book  22 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Getting started 
23
VQT2M13
START menu
Major functions of this unit can be operated from the START 
menu.
1Press [START].
2Press [3,4] to select the item and press 
[OK].
e.g., BD-Video
To exit the screen
Press [START].
∫ Selecting the source by the remote control
	≥Items to be displayed may vary with the media.Playback
Viewing Picture Play back the contents.
To p  M e n u
(> 25)
Menu
(> 25)
Network Displays the Home screen of the VIERA 
CAST (>34).
Input Select Switches to each source.
BD/DVD/CD
SD card
iPod
FM Radio: To enjoy the FM radio 
(> 29)
AUX
*1: To enjoy TV broadcasts with this 
unit’s speakers ( >30)
ARC
*1:  To enjoy TV broadcasts with 
this unit’s speakers ( >30)
DIGITAL IN 1
*1:  To enjoy TV broadcasts 
with this unit’s speakers ( >30)
*1 “(TV)” is displayed next to items set for TV 
AUDIO input.
DIGITAL IN 2*2: To enjoy audio from 
other devices with this unit’s speakers 
(> 30)
*2“(CABLE/SAT)” is displayed next to DIGITAL 
IN  when set for CABLE/SAT AUDIO input.
To enjoy sound from the TV
Select one source from either “AUX 
(TV)”, “ARC (TV)” or “DIGITAL IN 1 
(TV)”.
Sound(Equalizer) (>24)
Other Functions Playlists:  You can play playlists created 
on DVD-VR.
Setup:  (> 36)
Card Management:  (>27)
OKRETURN
Home theater
START
BD-Video
Other Functions
Playback
Top Menu
Input Select
Sound(Equalizer) Network
ButtonSource
BD/DVD or SD card (SD) (
>25)
iPod (IPOD) ( >32)
FM Radio (FM) ( >29)
AUX
*1  (> 30)
ARC
*1 (> 30)
DIGITAL IN 1
*1 (D-IN 1) ( >30)
DIGITAL IN 2
*2(D-IN 2) ( >30)*1 “(TV)” is displayed next to items set for TV AUDIO 
input.
*2 “(CABLE/SAT)” is displayed next to DIGITAL IN  
when set for CABLE/SAT AUDIO input.
To enjoy sound from the TV
Select one source from either “AUX (TV)”, 
“ARC (TV)” or “DIGITAL IN 1 (TV)”.
BD/SD
iPod
EXT-INRADIO
SC-BT230_330_730P_PC_VQT2M13_eng.book  23 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							24
VQT2M13
Enjoying sound effects 
from all speakers
1Press [SURROUND] several times to select 
the effect.
≥The selected effect will only be displayed on the main 
unit.
2While “MANUAL” is displayed, press 
[2, 1] and select the desired effect. ∫
Adjusting speaker level during play
1 Press and hold [–CH SELECT] to activate the speaker 
setting mode.
2 Press [–CH SELECT] several times to select the speaker.
Each time you press the button:
L R—)  C_)  RS_) RB
*_) LB*_) LS_)  SW
^"""""""""""""""""""""""""""""b
3 Press [ 3] (increase) or [ 4] (decrease) to adjust the 
speaker level for each speaker.
s6 dB to  r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥The selected mode will only be displayed on the main 
unit.
2 While the selected mode is displayed
Press [ 2,1 ] and select the desired setting.
	≥ The sound effects/modes may not be available or have no effect with some 
sources.
≥ You may experience a reduction in sound quality when these sound 
effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.
Enjoying surround sound 
effects
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the fr ont speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in 
Dolby Surround.
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect 
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from  all speakers with stereo 
sources.
2CH STEREO
You can play any source in stereo. Sound will be 
output to the front speakers and the subwoofer only.
* [BT730]  [BT330]  [BT230]  When the optional surround back 
speakers are connected.
L R: Front speaker (left and right: only the balance is 
adjustable.)
≥ Press [ 2,1 ] to adjust the balance of the front 
speakers.
C: Center speaker
RS: Surround speaker (right)
RB
*: Surround back speaker (right)
LB
*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥ The channels not included in the playing audio will not be 
displayed (subwoofer is displayed even if it is not 
included).
EQ: (Equalizer) You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUB W: (Subwoofer level)
You can adjust the amount of base.
1 (Weakest effect) to  4 (Strongest effect)
≥ The setting you make is retained, and recalled every 
time you play the same type of source.
H.BASS You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly , even if the acoustics 
of your room are not optimal.
≥ The setting you make is retained, and recalled every 
time you play from the same type of source.
C.FOCUS: (Center focus)
(Effective when playing audio containing center 
channel sound.) You can make the sound of the center speaker seem 
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround) You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)
SC-BT230_330_730P_PC_VQT2M13_eng.book  24 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Getting started 
Playback
25
VQT2M13
Playb ack
Playing video contents
[BD]  [DVD]  [CD]  [SD]
Preparation
Turn on the television and select the appropriate video input on 
the television.
1Press [ Í] to turn on the unit.
2Insert the media.
Play starts.
≥If the menu is displayed, press [ 3,4,2,1 ] to select 
the item and press [OK].
≥ If play does not start, press [ 1PLAY].
∫ To show menus
You can show Top Menu, Direc t Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP 
MENU].
≥ Press [ 3,4, 2,1 ] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and 
selecting “Pop-up Menu”.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
information displayed will change.
	≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press 
[∫STOP] when you finish to preserve the unit’s motor and your television 
screen.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ It is not possible to playback AVCHD and MPEG2 video which have been 
dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and 
contents.
Press [ ∫STOP].
The stopped position is memorized.
Resume play function 
Press [ 1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press 
[∫ STOP] several times to display “STOP” on unit’s display.
≥ On BD-Video discs including BD-J ( >47), the resume 
play function does not work. Press [
;PAUSE].
≥ Press [ ;PAUSE] again or [ 1PLAY] to restart play. 
Search
While playing, press [SEARCH 6] or [SEARCH 5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 6] or [SEARCH 5] .
≥ BD-Video and AVCHD:  Forward direction [SEARCH 5] 
only.
The speed increases up to 5 steps.
≥ Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [SKIP :] or [SKIP 9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
While paused, press [ 2] (2;) or [1] (;1 ).
≥ Press and hold to change in succession forward or 
backward.
≥ Press [ 1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1] (;1 ) only.
Press [AUDIO].
You can change the audio channel number or soundtrack 
language ( >45), etc.
Other operations during play
Stop
PlayBD-Video T1     C1     0:05.140:20.52
Current position
e.g. BD-Video
To t a l  t i m e
Elapsed time in the title
T: Title, C: Chapter, PL: Playlist
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
SC-BT230_330_730P_PC_VQT2M13_eng.book  25 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							26
VQT2M13
1Press [SUB MENU]
2Select an item and press [OK].
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥ When “TV Aspect” ( >37) is set to “4:3” or “4:3 Letterbox”, 
the “Zoom” effect is disabled.
	≥ Depending on the media and contents, displayed items are different.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as 
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to 
enjoy more functions such as  subtitles, exclusive images and 
online games by connecting this unit to the Internet.
≥ The usable functions and the operating method may vary 
with each disc, please refer to the instructions on the disc 
and/or visit their website.
To turn on/off secondary video
1 Press [DISPLAY].
2 Press [ 3,4 ] to select the “Disc” menu and press [ 1].
3 Press [ 3,4 ] to select the “Signal Type” menu and press 
[OK].
4 Press [ 3,4 ] to select the “Video” under “Secondary 
Video” menu and press [ 1].
5 Press [ 3,4 ] to select the “On” or “Off”.
6 Press [RETURN] to exit.
A Secondary video
B Primary video
To turn on/off secondary audio
1Press [DISPLAY].
2 Press [ 3,4] to select the “Disc” menu and press [ 1].
3 Press [ 3,4] to select the “Signal Type” menu and press 
[OK].
4 Press [ 3,4] to select the “Soundtrack” under “Secondary 
Video” menu and press [ 1].
5Press [3,4] to select the “On” or “Off”.
When “On” is selected, press [1] and then press [3,4] to 
select the language.
6 Press [RETURN] to exit.
	≥During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, 
secondary audio will not be played ( >36).
Useful functions
While DIRECT NAVIGATOR screen is displayed
PropertiesTo display the titles properties (recording 
date, etc.)
View 
ChaptersTo select the chapter
To picturePlaying still pictures  (>27)
Select 
FolderTo switch to another folder
While playing
Screen 
AspectWhen black bars are shown at the top, 
bottom, left, and right sides of the screen, you 
can enlarge the image to fill the screen.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo display Menu.
Enjoying BD-Live or 
BONUSVIEW in BD-Video
Playing picture-in-picture


SC-BT230_330_730P_PC_VQT2M13_eng.book  26 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Playback
27
VQT2M13
Some BD-Live content available on the Blu-ray discs may 
require an Internet account to be created in order to access the 
BD-Live content. Follow the screen display or instruction 
manual of the disc for information on acquiring an account.
1Connect to the network. (>17)
2Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage ( >47).
3Insert the disc.
∫ Deleting data/Formatting SD cards
1 Insert an SD card.
2 Press [START].
3 Press [ 3,4] to select “Other Functions” and press [OK].
4 Press [ 3,4] to select “Card Management” and press 
[OK].
5 Press [ 3,4] to select “BD-Video Data Erase” or “Format 
SD Card” and press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK].
	≥ To use the above functions, it is recommended that you format the card on 
this unit. If the SD card you use is formatted, all data on the card will be 
erased. It cannot be recovered.
≥ “BD-Li ve Internet Access” may need to  be changed for certain discs 
(> 36).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
Playing still pictures
[BD]  [DVD]  [CD]  [SD]
(BD-RE, DVD-RAM/R/R DL, CD-R/RW, SD Card)
1Insert a disc or SD card.
If the menu is displayed, press [ 3,4] to select the item 
and press [OK].
2BD-RE, DVD-RAM
Press [ 3,4,2,1] to select the album and 
press [OK].
3Press [ 3,4,2, 1] to select the still 
picture and press [OK].
Press [ 2,1 ] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
∫ To show the picture properties
While playing, press [STATUS] twice.
To exit the screen
Press [STATUS].
Enjoying BD-Live discs with 
Internet
Card Management No. of Files    6
Free space    300 MB
SD card
Format this SD Card.OK
RETURN
BD-Video Data EraseFormat SD Card
RG
 To t a l  8
106_DVD
 Total 132006  9  12
VideoPicture
Press [OK] to go to Picture View.
Previous Next
Slideshow
Video Picture Page  02/02BY
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)
SUB
MENUOKRETURN
SUB
MENU
DIRECT NAVIGATORPicture ViewDVD-RAM(VR)
Play
RETURN
2006  9  12
Page  001/001
0001
0005
0009 0006 0007 0008 0002 0003 0004
VideoPicture
                                    
Photo     11/12/2007            Total        3/9
e.g. JPEG on DVD-RAM Shooting date
SC-BT230_330_730P_PC_VQT2M13_eng.book  27 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							28
VQT2M13
1Press [SUB MENU].
2Select an item and press [OK].
	≥Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
≥ When both a music CD and an iPod/iPhone is inserted to this unit, the 
iPod/iPhone has a priority to be played back as Background Music.
Playing music
[DVD]  [CD]
(DVD-R/R DL, music CD, CD-R/RW)
1Insert a disc.
If the menu is displayed, press [ 3,4] to select the item 
and press [OK].
2Press [ 3,4] to select the track and press 
[OK].
∫ Playing a track in another folder
1 While the “Music list” is displayed
Press [SUB MENU].
2 Press [ 3,4 ] to select “Select Folder” and press [OK].
	≥ You cannot select folders that contain no compatible tracks.
Useful functions
While “Album View” or “Picture View” screen is displayed
Start 
Slideshow You can display still pictures one by one at a 
constant interval.
Slideshow 
SettingsDisplay Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
Music files on an iPod/iPhone or a music CD 
can be played back as Background Music 
during the slideshow.
Press [ 3,4,2 ,1] to select “Set” and 
press [OK].
Select Root 
folderTo switch to another higher folder
≥ Only if there is a multiple number of higher 
folders recognizable
Select 
FolderTo select the still pictures in another folder
To  V i d e oPlaying video contents ( >25)
To  a l b u m  
viewTo display album view.
While playing (except for slideshow)
Rotate RightRotate the still picture.
Rotate Left
Zoom outReduce the still picture
≥ This function is only available for 
small-sized still pictures.
Zoom inCancel “Zoom out”
 0.09  4.30
01
02
03
04
05Music listNo.
Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track25 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5DIRECT NAVIGATORCD
PlayRETURN
“ ” indicates the track currently playing.
SC-BT230_330_730P_PC_VQT2M13_eng.book  28 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							RadioPlayback
29
VQT2M13
Radio
Listening to the Radio
Up to 30 stations can be set.
1Press [RADIO] to select “FM”.
2Press [STATUS] to select the position to 
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.9 or 
FM87.5).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations 
manually”.
3Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all th e stations it can receive into 
the channels in ascending order.
	
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the 
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset 
the stations manually.
Preparation
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH 6] or [SEARCH 5] to select the 
frequency.
≥ To start automatic tuning, press and hold [SEARCH 6], [SEARCH5] 
until the frequency starts scrolling. Tuning stops when a station is found.
1While listening to the radio broadcast
Press [OK].
2While “P” is flashing on the display
Press the numbered buttons to select a 
channel.
To select a 1-digit number
e.g., 1: [1] B[OK].
To select a 2-digit number
e.g., 12: [1] B[2]
	≥A station previously stored is overwritten when another station is stored in 
the same channel preset.
1Press [RADIO] to select “FM”.
2Press the numbered buttons to select the 
channel.
To select a 1-digit number
e.g., 1: [1] B[OK].
To select a 2-digit number
e.g., 12: [1] B[2].
Alternatively, press [ W,X] or [ 2,1].
∫ Display on the main unit
TUNED/STEREO: Displayed when receiving stereo 
broadcasting
TUNED: Displayed when receiving monaural 
broadcasting or monaural sound is 
selected.
∫ FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to 
receive broadcasts allocated in 0.1 MHz. You may need to 
change this setting if the tuner seems to skip over the correct 
frequency for stations in your area.
1 Press [SELECTOR] to select “FM”.
2 Press and hold [SELECTOR].
After a few seconds the display changes to show the 
current lowest frequency. Continue to hold the button 
down. The lowest frequency changes and the step is 
changed.
To return to the original settings, repeat steps  1 and 2.
	≥ After changing the setting, previously preset frequencies will be cleared. 
Preset them again.
Presetting stations 
automatically
Presetting stations manually
Listening/confirming the preset 
channels
∫ If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again to cancel the mode. “AUTO ST” will 
be displayed on the main unit. Depending on the broadcast 
system, stereo or monaural will be selected.
“MONO” is also canceled  when you change the frequency.
≥ This setting can be preset for each broadcasting station.
SC-BT230_330_730P_PC_VQT2M13_eng.book  29 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							30
VQT2M13
TV
Enjoying TV with unit’s 
speakers
Preparation
Turn on your TV and select the appropriate audio input mode 
[AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this 
unit. ( >23)
You can enhance stereo sources with surround sound effect.
1Press [SURROUND] several times to select 
the effect.
2While “MANUAL” is displayed on the unit’s display
Press [ 2,1] and select the desired effect.
For more detailed information on this operation, please refer to 
the “Enjoying surround sound effects” section on page 24.
You can adjust the mode depending on the source or situation.
1Press [SOUND] several times to select the 
mode.
2While the selected mode is displayed on the unit’s 
display
Press [ 2,1] and select the desired setting.
For more detailed information on this operation, please refer to 
the “Changing the sound modes” section on page 24. Select to suit the type of audio from the DIGITAL AUDIO IN 
terminals on the main unit.
Press [EXT-IN] several times to select “D-IN 1” 
(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).
∫
DIGITAL IN 1/DIGITAL IN 2
Press [AUDIO].
MAIN
SAP*
M+S* (stereo audio)
* “SAP ” = Secondary Audio Program
(Only works with Dolby Dual Mono)
≥ “MAIN” or “SAP” is not available if “On” is selected in “Digital 
Audio Input”. ( >36)
∫ DIGITAL IN 2
Press [STATUS].
CABLE/SAT AUDIO :
Select when an HDMI connected STB is selected on the 
TV, D-IN 2 input is automatically selected.(> 31, “Setting 
the audio link with the STB”).
	≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not 
output from the HDMI AV OUT terminal.
Surround sound effects 
Surround modes to enjoy TV audio or stereo 
sources from all speakers:
≥DOLBY PL II MOVIE
≥ DOLBY PL II MUSIC
≥ S.SURROUND
≥ Cinema Surround ( >19)
Sound modes
Making settings for digital 
audio input
SC-BT230_330_730P_PC_VQT2M13_eng.book  30 ページ  ２０１０年３月１６日　火曜日　午後５時５７分