Panasonic Sc Bt230 Operating Instructions

							TV
31
VQT2M13
Linked operations with 
the TV
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1Set “VIERA Link” to “On” ( >37). 
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and 
select this unit’s input channel on the connected TV so that 
the “HDAVI Control” function works properly.
Also when the connection or settings are changed, 
repeat this procedure.
∫Setting the audio link with the TV
With the remote control;
≥Select the actual TV audio connection on the main unit.
1 Press [START] and press [ 3,4] to select “Other 
Functions” and press [OK].
2 Press [ 3,4] to select “Setup” and press [OK].
3 Press [ 3,4] to select “TV / Device Connection” and press 
[OK].
4 Press [ 3,4] to select “TV Audio Input”.
5 Press [ 2,1] to switch “AUX”,“ARC” or “DIGITAL IN 1”.
Whenever the connection or sett ings are changed, reconfirm 
the points above.
∫ Setting the audio link with the STB
With the remote control;
≥Select the STB input channel on the TV.
1 Press [EXT-IN] to select “D-IN 2”.
2 Press [STATUS] to select “CABLE/SAT AUDIO ON”.
≥ If the input channel of the STB on the TV is changed or if you 
want to change the device allocated for the linked 
operations, select “CABLE/SAT AUDIO OFF” in step  2 
above and then repeat steps  1 to 2 .
	≥VIERA Link “HDAVI Control”, based on the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009) 
for Panasonic’s HDAVI Control compatible equipment. This standard is 
compatible with Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
You can turn on this unit and the TV, and start play with a 
single press of a button.
While the unit and the TV are in standby mode;
Press [ 1PLAY].
You can select whether audio is output from the unit’s 
speakers or the TV speakers by using the TV menu settings. 
Home theater
This unit’s speakers are active.
≥ When this unit is in standby mode, changing the TV 
speakers to this unit’s speakers in the TV menu will 
automatically turn the unit on and select, “AUX”
*1, “ARC”*1 or 
“D-IN 1” (DIGITAL IN 1)*1 as the source.
≥ You can control the volume setting using the volume or mute 
button on the TV’s remote control. 
≥ If you turn off this unit, TV speakers will be automatically 
activated.
TV
TV speakers are active.
≥The volume of this unit is set to “0”.
≥ Audio output is 2-channel audio.
	≥ When switching between this unit’s speakers and TV speakers, the TV 
screen may be blank for several seconds.
When the following operations are performed, the television 
will automatically switch the input channel and display the 
corresponding action. When the TV is off, the TV will 
automatically turn on.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., Direct Navigator screen)
≥ When you switch the TV input to TV tuner mode, this unit will 
automatically switch to “AUX”
*1, “ARC”*1 or “D-IN 1” (DIGITAL 
IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2.
≥ This function does not work w hen the iPod/iPhone selector is 
chosen. ( >33)
Delay between audio and video is automatically adjusted, 
enabling you to enjoy smooth audio for the picture ( >37, 
“Audio Delay”).
≥ This function works only when “BD/DVD”, “SD”, “AUX”
*1, 
“ARC”*1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 
2)*2 is selected as the source on this unit.
*1 “AUX”, “ARC” or “D-IN 1” works depending on the setting  in “Setting the audio link with the TV”.
*2 “D-IN 2” works depending on the setting in “Setting the 
audio link with the STB”.
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function 
that offers linked operations of this unit, and a 
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment 
with an HDMI cable. See the operating instructions for 
connected equipment for operational details.
Setting the audio link
One touch play
Speaker control
Automatic input switching 
(Power on link)
Automatic lip-sync function 
(for HDAVI Control 3 or later)
SC-BT230_330_730P_PC_VQT2M13_eng.book  31 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							32
VQT2M13
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch the 
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that 
supports HDAVI Control 2 or later.)
Select “Video” in “Power Off Link” (>37)
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the 
“Control Panel” and display the Top Menu or Pop-up Menu, 
etc.
≥ This works only during “BD/DVD” or “SD” playback and 
resume modes.
1Press [SUB MENU].
2Select an item and press 
[OK].
≥The sub menu may not appear 
while the Top Menu for BD-Video 
or DVD-Video is displayed.
	≥ The buttons that you can use for this unit vary depending on the TV. For 
details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible 
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed 
from the TV’s remote control.
Other de vices
Using the iPod/iPhone
Preparation
≥Before connecting/disconnecting the iPod/iPhone, turn the 
main unit off or reduce the volume of the main unit to its 
minimum.
≥ Make sure that the video cable connection is made to view 
photos/videos from the iPod/iPhone.
1Push # to open the iPod/iPhone lid.
2Connect the iPod/iPhone (not included) 
firmly.
	About recharging the battery
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone 
charging in main unit standby mode.
≥ Once fully recharged, additional recharging will not occur.
Compatible iPod/iPhone (as of December 2009)
≥Compatibility depends on the software version of your iPod/
iPhone.
Power off link
Easy control only with VIERA 
remote control
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENUOKRETURN
iPod/iPhone Connection
A Dock adapter (not included)
≥Attach the dock adapter until firmly fitting into the 
dock. The adapter should be supplied with your 
iPod/iPhone for the stable use. 
If you need an adapter, consult your iPod/iPhone 
dealer.
B Dock for iPod/iPhone
NameMemory size
iPhone 3GS 16 GB, 32 GB
iPhone 3G 8 GB, 16 GB
iPod nano 5th generation (video camera) 8 GB, 16 GB
iPod touch 2nd generation 8 GB, 16 GB, 32 GB, 64 GB
iPod classic 120 GB, 160 GB (2009)
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 160 GB (2007)
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30 GB
iPod 4th generation 40 GB
iPod 4th generation 20 GB
iPod mini 4 GB, 6 GB


Main unit iPod/iPhone
1
2
SC-BT230_330_730P_PC_VQT2M13_eng.book  32 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							TV
Other devices
33
VQT2M13
Preparation≥ Make sure that the “IPOD” source is selected. Press [iPod] to 
select the source.
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate 
photo/video output settings for your TV. 
≥ To display the picture, turn on the TV and select the 
appropriate video input mode.
To use the iPod touch/iPhone features
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone  features on the touch screen 
to operate.
1Press [iPod] to select “IPOD”.
2Press [STATUS] several times to select the 
music menu or videos menu.
3Press [ 3,4] to select an item and press 
[OK].
≥ Repeat this step until the selected title starts playback.
≥ Press [ 2,1 ] to display the previous or next page.
e.g., music playback screen
To exit, press [TOP MENU/DIRECT NAVIGATOR].
1Press [iPod] to select “IPOD”.
2Press [STATUS] several times to select 
“ALL” on the unit’s display.
3Switch the TV input to video in.
4Play a slideshow on your iPod/iPhone.
The picture will be displayed on your TV.
You can use the remote control to operate the iPod/iPhone 
menu.
The operation may vary among iPod/iPhone models.
≥ [3 ,4 ]: To navigate menu items
≥ [OK]: To go to the next menu.
≥ [RETURN]: To return to the previous menu.
1Press [START].
2Press [ 3,4] to select “Menu” and then 
press [OK].
3Press [ 3,4] to select “Playback Mode” 
and then press [OK].
4Press [ 3,4] to select an item and press 
[OK].
Shuffle (For music playback only.)
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
Play all songs on an album in random order.
Repeat
One:
Play a single song/video repeatedly.
All:
Play all songs/videos from se lected items (e.g., Playlists, 
Albums, etc.) repeatedly.
5Press [ 3,4] to select the setting and press 
[OK].
	≥ The setting of the playback mode will be kept until changes are made on 
the same iPod/iPhone.
≥ This function does not work when “All (iPod display)” is selected.
(For music and video playback only)
	≥Surround sound effect and sound mode are available ( >24).
iPod/iPhone Playback
Enjoy music/video
Enjoy photos
iPod
Ronaldo
-2:30
Good morning
45 of 1230
Happy days
Shuffle (Albums)
Repeat (All)1:00
Other methods of playback
Basic controls
ButtonsFunctions
[ 1 PLAY] Play
[ ∫ STOP] Pause
[ ; PA U S E ]
[SKIP :, 
SKIP 9] Skip
(Press and hold) [SEARCH 6, 
SEARCH 5] Search
SC-BT230_330_730P_PC_VQT2M13_eng.book  33 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							34
VQT2M13
Advanced operations
Enjoying VIERA 
CAST
TM
You can access a selection of Internet services from the Home 
screen with VIERA CAST, for example YouTube, Picasa Web 
Albums. (Current as of December 2009)
Preparation≥Network connection ( >17)
≥ Network setting (> 20)
1Press [VIERA CAST].
Message is displayed. Please read these instructions 
carefully and then press [OK].
2Press [3,4, 2,1] to select the item and 
press [OK].
Operable buttons: 
[ 3 ,4 ,2, 1], [OK], [RETURN], colored buttons, 
numbered buttons
VIERA CAST Home screen;
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [START] or [TOP MENU/DIRECT NAVIGATOR].
≥ When the Blu-ray disc logo is selected on the Home screen, 
the playback source will be changed and go back to the 
source previously selected.
	≥ In the following cases, settings are possible using “Internet Content 
Settings” ( >38)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly. 
A high-speed Internet service with a speed of at least 6 Mbps is 
recommended.
≥ Be sure to update the firmware when a firmware update notice is displayed 
on the screen. If the firmware is not updated, you will not be able to use the 
VIERA CAST
TM function. ( >21)
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective 
service providers, and service may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic will make no warranty 
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be 
presented in specific languages.
Playback menu
1Press [BD/SD] to select “BD/DVD”.
2Press [DISPLAY].
e.g., BD-Video
3Press [ 3,4] to select the menu and press 
[ 1].
4Press [ 3,4,2, 1] to select the item and 
press [ 1].
5Press [ 3,4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen 
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped, 
etc.) and media contents, there may be some items that 
you cannot select or change.
Regarding Language, Audio attribute and Video attribute : 
(> 45)
Signal Type
Primary Video
Secondary Video
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending 
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(>25, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu. (> 25)
Featured VideosFeatured Photos
Weather28ÃNew York, NY
W 17mphSettings
BloombergXXX
XXX
XXX7465.95
778.94
1442.82 -89.68
-9.47998 -25.15TELEVISION15min. delayTop Movie Rental
   XXXXXX
Top TV Show
   XXXXXX
COMING SOON
COMING
SOON
Images are for illustration purposes, contents may 
change without notice.
Disc
VideoThe recording method of original video 
appears.
SoundtrackSelect the type of audio or language.
VideoSelect on/off of images. The recording 
method of original video appears.
SoundtrackSelect on/off of audio and the language.
VideoAudio
PlaySignal Type
Subtitle
Subtitle Style
OffMain
-Angle-
1ENG
Disc
Menus Items Settings
SC-BT230_330_730P_PC_VQT2M13_eng.book  34 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Advanced operations
35
VQT2M13
Repeat Play
(Only when the elapsed time is being displayed on the unit’s 
display.)
Select the item which you want to repeat. The items displayed 
differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Playback Information Window
Displays the following.
Press [RETURN] to exit.
Picture
Select the picture quality mode during play.
Detail Clarity
The picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit 
the type of material being played.
≥When the content is distorted change the settings from 
“Auto“ to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p are 
output at 24p.
≥Only when you have selected “On” in “24p Output” ( >37)
Sound Effects*1, *2
(Discs recorded at 48 kHz or less)
This feature gives you bright er sound by increasing the high 
frequency portion of the audio.
Dialog Enhancer*1
The volume of the center channel is raised to make dialog 
easier to hear.
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for 
outputting image, it produces clearer sound because the 
analog video circuit (via VIDEO OUT terminal) can be stopped.
≥ Only when you have selected “Enable” in “High Clarity 
Sound” ( >37).
Play
Audio/video attribute information of disc.
Settings status of “Digital Audio Output”( >36).
HDMI output information.
Video
*&/+
Audio
Re-master 1 Pop and rock
Re-master 2Jazz
Re-master 3Classical
*1 When audio is output from the HDMI AV OUT terminal this function is 
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 36)
*2 This function has no effect when the type of audio is Dolby Pro Logic II.
SC-BT230_330_730P_PC_VQT2M13_eng.book  35 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							36
VQT2M13
Setup menu
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1Press [START] and press [3,4] to select 
“Other Functions” and press [OK].
2Press [ 3,4] to select “Setup” and press 
[OK].
3Press [ 3,4] to select the menu and press 
[OK].
4Press [ 3,4] to select the item and press 
[OK].
If there are any other items, repeat these steps.
5Press [ 3,4,2, 1] to select the option and 
press [OK].
≥ There may be differences in operation methods. If this 
happens, follow the on-screen instructions for the operation.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown.
Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc 
will be selected.
≥ Enter a code ( >45) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Subtitle Language
Choose the language for subtitle.
≥If “Automatic” is selected and the language selected for 
“Audio Language” is not available, subtitles of that language 
will automatically appear if available on that disc.
≥ Enter a code ( >45) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
Menu Language
Choose the language for disc menus.
≥Enter a code ( >45) with the numbered buttons when you 
select “Other  ¢¢¢¢”.
BD-Live Internet Access ( >27)
You can restrict Internet access when BD-Live functions are 
used. 
≥If “Allow ( Limited )” is selected, Internet access is permitted 
only for BD-Live contents which have content owner 
certificates.
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Seamless Play
The chapters segment in play lists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the 
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
Digital Audio Input
Select whether to receive the digital sound as PCM or the 
original sound format. 
Select “On” if the sound is cut off intermittently. 
Downmix
Select the downmix system to enjoy multi-channel or 
2-channel sound.
≥Select Surround encoded to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases.
– AVCHD playback
– Playback of secondary audio  (including the button click 
sound).
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” ( >38)
Disc
RETURN
SetupDiscVideoAudioDisplayTV / Device ConnectionNetworkOthers
OK
Video
AutoAutomatically selects the type of picture shown.
FieldSelect if jittering occurs when “Auto” is selected.
FrameSelect if small text or fine patterns cannot be 
seen clearly when “Auto” is selected.
Audio
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output
.≥Select “ PCM”, when the connected e quipment cannot 
decode the respecti ve au dio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). ( >26)
≥ If “Off” is selected, the unit outputs the primary audio only.
SC-BT230_330_730P_PC_VQT2M13_eng.book  36 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Advanced operations
37
VQT2M13
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded 
and played back at 7.1ch.
≥If Off is selected, sound is  played over the original number 
of channels (Note that in the case of 6.1ch audio, playback 
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD or LPCM.
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for 
outputting image, it produces clearer sound because the 
analog video circuit (via VIDEO OUT terminal) can be stopped.
≥Set to “Enable” and then set “High Clarity Sound” on the 
playback menu to “On”. ( >35)
Audio Delay
Mis-sync between the video and audio is corrected by delaying 
the audio output.
Speaker
Refer to page 39
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”:
If there is no operation for 5 minutes or more, the displayed 
screen switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected, the display is dimmed but brightens 
when you perform some operations.
(For the U.S.A. and Canada)
FL Control (Vol 0) 
≥If “On” is selected, the unit’s display will turn off when the 
volume is adjusted to “0”.
License
Information about the software used by this unit is displayed.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 
ratio image:
HDMI Connection
Press [OK] to show the following settings.
Display
TV / Device Connection
4:3The sides are cut off so the 
picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.
4:3 LetterboxBlack bands appear at the 
top and bottom of the 
picture.
When connected to a 16:9 widescreen television and playing 
4:3 ratio image:
16:9Video is displayed as a 4:3 ratio image in the 
center of the screen.
HDMI Resolution
The items supported by t he connected devices are 
indicated on the screen as “ ¢”. When any item without “ ¢” 
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output 
resolution best suited to the connected television.
≥ To enjoy high definition video up-converted to 1080p, you 
need to connect the unit directly to 1080p compatible 
HDTV (High Definition Television). If this unit is connected 
to an HDTV through other equipment, it must also be 
1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set 
“24p” in “Video” ( >35) to “On”.
≥ When BD-Video images other than 24p are played, 
images are output at 60p.
HDMI Color Mode
This setting is for selecting color-space conversion of the 
image signal when the unit is connected using an HDMI 
cable.
HDMI Audio Output
This setting selects whether or not to output audio from 
HDMI. Audio will be output through the systems speakers 
when Off is selected.
VIERA Link
Set to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color output 
when a television that supports Deep Color is connected.
Contents Type Flag
Depending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.
Power Off Link
Select the desired power off link setting of this unit for 
VIERA Link operation ( >32). (This works depending on the 
settings of the connected VIERA Link “HDAVI Control” 
compatible equipment.)
Video/Audio:
When the TV is turned off, this unit will turn off automatically.
Video:
When the TV is turned off, this unit will turn off except during 
the following conditions: j CD or MP3 audio playback 
j iPod/iPhone mode
j Radio mode
j “AUX”,“ARC” or “D-IN 1” (DIGITAL IN 1) mode 
(non-selected TV AUDIO setting for VIERA Link)
j “D-IN 2” (DIGITAL IN 2) mode (non-selected CABLE/
SAT AUDIO setting for VIERA Link)
SC-BT230_330_730P_PC_VQT2M13_eng.book  37 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							38
VQT2M13
TV Audio Input
Select the TV audio input to work with the VIERA Link 
operations.
Network Easy Setting (>20)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings.
(For units with PX printed on the packaging)
Off Timer
Select how long the unit remains on when it is not being used.
≥Effective only when “BD/DVD” or  “SD” is selected as source.
Remote Control Code
Change the remote control code, when other Panasonic 
products react to this remote control.
Quick Start*
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to On”, so 
contents of the following will be different from the time it is 
set to “Off”.
– Idle power consumption will increase. (about the power 
consumption  >48)
*The cooling fan may turn slowly to prevent overheating of  internal parts.
* Depending on the power conserving setting activated on  the TV, this function may have less effect when the unit is 
started by the power on link function. ( >31)
[BT730] [BT330] Smart setup /
[BT230] [BT235] Easy setup ( >19)
You can execute basic settings  to optimize your home theater 
system.
Restore Default Settings
This returns all values in the Setup menu and the playback 
menu, except for “Remote Control Code”, “On-screen 
Language”, “IP Address / DNS Settings”, “Proxy Server 
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video 
Ratings” to the default settings.
System Information
Display the following items. – Firmware version of this unit
–[BT730]  [BT330]  [BT230]  Wireless LAN module of optional 
Wireless LAN Adaptor
Firmware Update ( >21)
Press [OK] to show the following settings.
Network
LAN Connection Mode
Select connection method.
[BT730]  [BT330]  [BT230]  Access Point Connection Setting
This allows the Wireless router (Access point) and 
connection settings to be set and the current connection 
settings and connection state to be checked when a 
wireless connection is used.
[BT730]  [BT330]  [BT230]  Connection Setting
The Wireless router (Access point) connection wizard will 
be displayed.
IP Address / DNS Settings
This is for checking the state of the network connection and 
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting is enabled only when “Auto 
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy 
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings ( >34) (VIERA CAST)
Press [OK] to show the following settings.
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit 
password with the numbered buttons when the 
password screen is shown. 
Audio Auto Gain Control
Volume that is different depending on the contents is 
adjusted automatically to the standard volume while using 
the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s 
time to match your location.
≥ Some VIERA CAST contents require the time zone to be 
set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Automatic Update Check
When this equipment remains connected to the Internet, it 
will check for the latest firmware version when it is turned on 
and you can update it if necessary.
Update Now
You can update the firmware manually.
SC-BT230_330_730P_PC_VQT2M13_eng.book  38 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							Advanced operations
39
VQT2M13
Delay time
For optimum listening with 5.1-channel sound, all the 
speakers, except for the subwoofer, should be the same 
distance from the seating position.
If either distance A or  B  is less than  C (> below), find the 
difference in the relevant table and adjust the delay time to 
make up for the difference.
1Press [ 3,4, 2,1] to select the distance 
box ( ) and press [OK].
e.g., 5.1ch setting
[BT730]  [BT330]  [BT230]
e.g., 7.1ch setting
2Press [ 3,4] to select the setting and press 
[OK].
[BT730]  [BT330]  [BT230]
∫ When using the 7.1ch speaker system
1 Check the distance difference of both the front speakers 
and the surround back speakers from the seating position.
2 Set the delay time of the surround back speakers.
Volume (Channel balance) ( )
(Effective when playing multi-channel audio)
1Select “Test” and press [OK].
A test signal is output.
2While listening to the test signal
Press [ 3,4] to adjust the volume of each 
speaker.
The volume can be adjusted between  r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the 
Front (L) and Front (R) speaker volume respectively.
≥ No signal is output for the subwoofer. To adjust its 
volume, see page 24, “Adjusting speaker level during 
play”.
3Press [OK].
The test signal stops.
To finish the speaker setting
Press [ 3,4, 2,1 ] to select “Complete” and press [OK].
Speaker settings
A B C: Primary listening distance
A Approximate room dimensions
B Actual speaker position
C Ideal speaker position
D Circle of constant pr imary listening distance
A Center (C)
B Left Surround (LS), Right Surround (RS)
C Left Surround back (LB), Right Surround back (RB)
A Center speaker
DifferenceSetting
Approx. 34 cm (1 ft. 1 in.) 1.0 ms
Approx. 68 cm (2 ft. 2 in.) 2.0 ms
Approx. 102 cm (3 ft. 4 in.) 3.0 ms
Approx. 136 cm (4 ft. 5 in.) 4.0 ms
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
: 
: L
LS
R
SW
C
RS
C
RSLS
A
B
C
A
B
C
D
0.0ms
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW


0
00
0.0
0.0
0.000dB
dBmsRB
LB
ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW

B Surround speakers/
[BT730]  [BT330]  [BT230]  Surround back speakers
DifferenceSetting
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 340 cm (11 ft. 1 in.) 10.0 ms
Approx. 510 cm (16 ft. 8 in.) 15.0 ms
Adjusting speaker level
ACenter (C)
B Te s t
C Left Surround (LS), Right Surround (RS)
dB0
0
00
0.0
0.0ms
CompleteTe s t
LS R
L
RS
dB
dB
dB
msC
0dBSW



e.g., 5.1ch setting
SC-BT230_330_730P_PC_VQT2M13_eng.book  39 ページ  ２０１０年３月１６日　火曜日　午後５時５７分
 
						

							40
VQT2M13
Optional speaker  settings
Speaker installation 
option
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached 
should be capable of supporting 10 k g (22 lbs) per screw. 
Consult a qualified building contractor when attaching the 
speakers to a wall. Improper attachment may result in 
damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using 
methods other than those described in this manual.
1Drive a screw (not incl uded) into the wall.
2Fit the speaker securely onto the screw(s) 
with the hole(s).
Front speaker
Attach to a wall without the base and the stand.
[BT730] [BT330]  [BT235] :
Surround speaker
[BT230] :
Front speaker and
surround speaker
F 97 mm (3 
13/16q)
G 210 mm to 212 mm (8 9/32q to 8 11/32q )
H 72 mm (2 27/32q)
I 349 mm to 351 mm (13 3/4q to 13 13/16q )
J 26 mm (1 1/32q) [BT730]
Center speaker
[BT330]
 [BT230]  [BT235]
Center speaker
K 117 mm (4 
19/32q)
L 209 mm to 211 mm (8 7/32q to 8 5/16q )
M 97 mm (3 13/16q)
N 18.8 mm (3/4q)
O 17 mm (21/32q)
P 99 mm to 101 mm (3 29/32q to 3 31/32q )
∫ To avoid speaker dropping
[BT730] : Front speaker, Center speaker
[BT330]  [BT235] : Front speaker
e.g.,  [BT730]  Front speaker
≥ Consult a qualified building contractor to avoid damage to 
the wall or speakers.
≥ Use a string of less than  ‰ 2.0 mm (
3/32q), which is capable of 
supporting over 10 k g (22 lbs).
[BT330]  [BT235]
Attaching to a wall
e.g.,  [BT730]  Front speaker
DO NOT DO
≥ In this position, the 
speaker will likely fall if 
moved to the left or right. ≥
Move the speaker so 
that the screw is in this 
position.

 

A
At least 30 mm (1 3/16q)
B ‰ 4.0 mm (5/32q)
C ‰ 7.0 mm to ‰ 9.4 mm 
(9/32q to 3/8q)
D Wall or pillar
E
5.5 mm to 7.5 mm (7/32q to 5/16q)

\b


[BT730] [BT330] [BT235]

Reattaching the speaker cable
\f







A String (not included)
B Screw eye (not included)
C Less than 10 cm (3 
15/16q)
D Rear of the speaker
Insert the cable 
from the bottom. Leave about 
120 mm
(4 
23/32q)
Pull out the cable 
through the hole.
SC-BT230_330_730P_PC_VQT2M13_eng.book  40 ページ  ２０１０年３月１６日　火曜日　午後５時５７分