Home > Panasonic > Software > Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Installing the LPR (Line Printer Remote) Monitor
    11
    Windows 98/Me
    Printer Section
    12The screen reverts to the Printer’s Properties.
    Check that the Print to the following port: was
    changed as entered, and click on the Apply button
    first and then on the   button.
    The printer properties dialog box is closed and you
    have now configured the printer as a network printer.
    OK 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    12
    Log in using an account with the administrators right.
    Windows NT 4.0
    1Click on the Start button, point to Settings, and click
    Control Panel.
    The Control Panel window appears.
    Double-click on the Network applet.
    The Network dialog box appears.
    2Click on the Services tab.
    Verify whether the LPR Service is already installed.
    (Indicated by Microsoft TCP/IP Printing shown in the
    Network Services list.)
    If it is already installed, skip over to Step 7. Otherwise
    continue installing the LPR Service.
    3Click on the   button to display the
    Select Network Service dialog box, then select
    Microsoft TCP/IP Printing.
    Click on the   button.Add...
    OK 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    13
    Windows NT 4.0
    Printer Section
    4The Windows NT Setup dialog box appears.
    Insert the Windows NT 4.0 CD-ROM, and type
    D:\i386 (where D: is your CD-ROM drive).
    Click on the   button.
    5After the files are copied into your Hard Drive, the
    display returns to the Network dialog box. Confirm
    that the Microsoft TCP/IP Printing service was added
    to Network Services list.
    Click on the   button.
    Note:
    Delete and Reinstall the Microsoft TCP/IP
    Printing if an error occurs, and the Microsoft
    TCP/IP Printing is displayed in the Network
    Services list, but, the OK button does not
    change into a Close button.
    6The Network Settings Change dialog box is
    displayed, click on the   button to confirm
    whether to restart your computer now.
    You have now completed the LPR Service
    installation.
    7After your computer is rebooted, click the Start
    button, point to Settings, and then click Printers.
    The Printers folder appears.
    Right-click on your desired printer (Ex. Panasonic
    DP-3000 PCL) and select Properties from the pop-
    up menu.
    Continue
    Close
    Yes
    Continued on the next page... 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    14
    Windows NT 4.0
    8The following step is to Register the LPR Port for
    network printing.
    Before proceeding, ensure that the Printer is
    installed, connected to the Network, is turned ON
    and operating properly.
    Select the Ports Tab and click on the
     button.
    9The Printer Ports dialog box appears.
    Select LPR Port and click the 
    button.
    10The Add LPR compatible printer dialog box
    appears.
    Enter the IP Address of the Printer in the upper field,
    and lp for the print queue name in the lower field.
    Click on the   button.
    (Please wait while the wizard verifies the IP Address
    and connectivity to the Network)
    Add Port...
    New Port
    OK 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    15
    Windows NT 4.0
    Printer Section
    11The Printer Ports dialog box appears.
    Click on the   button.
    12Select the printer port and click the 
    button.
    The printer properties dialog box is closed and you
    have now configured the printer as a network printer.
    Close
    OK 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    16
    Log in using an account with the administrators right.
    Windows 2000/XP
    1Open the Printers folder.
    Right-click on your desired printer (Ex.
    Panasonic DP-3000 PCL) and select
    Properties from the pop-up menu.
    The printer properties dialog box appears.
    2Select the Ports Tab and click on the
     button.
    Add Port... 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    17
    Windows 2000/XP
    Printer Section
    3Select Standard TCP/IP Port and click the
     button.
    4Click on the   button.
    5Enter the IP Address and the Port Name and
    click the   button.
    Note:
    The Port Name is automatically
    entered by Windows 2000/XP. You
    may change this as required.
    New Port ...
    Next
    Next
    Continued on the next page... 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    18
    Windows 2000/XP
    6Select Custom and click the 
    button.
    71. Under the Protocol, select LPR.
    2. Under the LPR Settings, enter the
    Queue Name (Ex. LPR1) and check the
    LPR Byte Counting Enabled.
    3. Click on the   button.
    8Click on the   button.
    Settings...
    OK
    Next 
    						
    							Installing the LPR (Line Printer Remote) Monitor
    19
    Windows 2000/XP
    Printer Section
    9Click on the   button.
    10Click on the   button.
    11Click on the   button.
    Click on the   button.
    The printer properties dialog box is closed and
    you have now configured the printer as a
    network printer.
    Finish
    Close
    Apply
    OK 
    						
    							20
    Configuring the Printer Driver Settings
    To change the printer settings, open the dialog box for the printer properties by the following steps.
    NOTE1. Upon printing, changing the properties of Paper/Layout, Handling, Quality and Device
    Options is allowed by clicking Properties in the print dialog box of an application.
    2.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified.
    Windows 98/Me
    1
    Click the Start button, point to Settings, and then click
    Printers.
    2
    Right-click on the desired printer icon in the printers
    folder, and select Properties in the dropdown menu.
    The printer properties dialog box appears. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions