Panasonic Uf 790 Operating Instructions Manual

							Installing the Panasonic Class 2 Fax Modem
171
Installation (Windows NT 4.0)
Class 2 Fax Modem 
Section
61. Enter D:\English\Work\Setup.
(Where D is your CD-ROM drive.)
2. Click on the   button.
71. Select the Class 2 Fax Modem of your
machine.
2. Click on the   button.
81. Select the COM port shown at the bottom of
the COM ports list.
2. Click on the   button.
9Click the   button.
• Installation of the modem is completed.
OK
Next
Next
Finish
Continued on the next page... 
						

							Installing the Panasonic Class 2 Fax Modem
172
Installation (Windows NT 4.0)
10Close the Modems Properties screen. 
						

							Installing the Panasonic Class 2 Fax Modem
173
Class 2 Fax Modem 
Section
Installing the Panasonic Class 2 Fax Modem. The installation is required for transmitting/receiving FAXs
with a PC, using a general-purpose PC fax function software (recommended: WinFax PRO 10.0).
Class 2 Fax Modem
Installation (Windows 2000/XP)
1Install the Com Port Redirector component from
the Panasonic-DMS installation using the
Custom install if you havent installed the PDMS
software.
2Select Settings from the Start menu and open
the Control Panel.
3Double-click the Add/Remove Hardware icon.
4Click on the   button.
51. Select Add/Troubleshoot a device.
2. Click on the   button.
Next
Next
Continued on the next page... 
						

							Installing the Panasonic Class 2 Fax Modem
174
Installation (Windows 2000/XP)
61. Select Add a new device.
2. Click on the   button.
71. Select No, I want to select the hardware from
a list.
2. Click on the   button.
81. Select Modems.
2. Click on the   button.
91. Select Dont detect my modem; I will select it
from a list.
2. Click on the   button.
Next
Next
Next
Next 
						

							Installing the Panasonic Class 2 Fax Modem
175
Installation (Windows 2000/XP)
Class 2 Fax Modem Section
10Click the  button.
11 1. E nter  D:\Engli sh \PanaDMS \S etu p.
(Where D is your CD-ROM drive.)
2. Click on the   button.
121. Select the  Class 2 Fax Modem  of your
machine.
2. Click on the   button.
131. Select the COM port shown at the bottom of the COM ports list.
2. Click on the   button.
Have Disk...
OK
Next
Next
Continued on the next page... 
						

							Installing the Panasonic Class 2 Fax Modem
176
Installation (Windows 2000/XP)
141. If a warning message for logo certification
appears, click the   button and
continue installation.
2. Click the   button.
• Installation of the modem is completed.
Yes
Finish 
						

							For Service, Call:
WARRANTY
U.S.A. Only
PANASONIC DIGITAL DOCUMENT COMPANY MAKES NO WARRANTIES, GUARANTEES OR
REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS
PANASONIC FACSIMILE MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PANASONIC DIGITAL DOCUMENT COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT
TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY
THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC
FACSIMILE MACHINE. SEE YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.
Published in Japan May 2003 DZSD001468-7 M0601-7053
Panasonic Digital Document Company
Unit of Matsushita Electric Corporation of America 
Two Panasonic Way
Secaucus, New Jersey 07094
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario L4W 2T3
For Customer Support 
(Except for USA and Canada Users):
Panasonic Communications Co., Ltd.
Fukuoka, Japan
http://www.panasonic.co.jp/global/