Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

							VQT5C36
11
For NFC-compatible AndroidTM devices only
Just placing an NFC (Near Field Communication)-compatible Bluetooth® device on 
the unit, you can complete all preparations, from registering a Bluetooth® device to 
establishing a connection.
Preparation
Enable the NFC function on the Bluetooth
® device
1 Download the app “Panasonic Music Streaming” (free of charge) to your  Bluetooth
® device from Google PlayTM.• Enter “Panasonic Music Streaming” in the search box of Google PlayTM and search 
  select “Panasonic Music Streaming” to download the app
2 Start the app “Panasonic Music Streaming” on your Bluetooth® device.• Follow on-screen instructions on your device.
• Always use the latest version of the app.
3 Touch and hold your device on the NFC touch area of this unit. 
(Until a pop-up window on your device indicates that the connection is 
established.)
When the unit recognizes your device, a beep sound is emitted.
• When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) 
on the unit lights up. Once the registration and connection of the Bluetooth® device is 
complete, move the device away from the unit.
• When the Bluetooth
® indicator (blue) does not light up even if you have touched the 
NFC touch area, change the touching position.
4 Start playing back music, a movie, etc. on your Bluetooth® device.
∫ Connecting to another device
If you touch another device to this unit, you can update the Bluetooth
® connection. 
The previously connected device will be disconnected automatically.
One-Touch Connection (Connecting by NFC)
SC-NA30_10PPC_VQT5C36_eng.book  11 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
12
You can change the transmission speed to prioritize sound quality or connectivity.• The default setting is “Emphasis on sound quality”. When the sound is interrupted, select “Emphasis on connectivity”.
While pressing and holding [LP], press and hold [ ] for 4 seconds or more. Emphasis on connectivity:
A beep sound is emitted once, and the Bluetooth® indicator (blue) and the LP mode 
indicator (green) flash once.
Emphasis on sound quality:A beep sound is emitted twice, and the Bluetooth® indicator (blue) and the LP mode 
indicator (green) flash twice.
Note• Press [LP], and within 2 seconds, press [ ]. If [ ] is pressed after this time limit, the LP  mode setting will be changed.
• Turn off this unit or the device.
• Stop / disable the Bluetooth® transmission of the device.
• (For NFC-compatible devices only) Touch and hold your device to NFC touch area of this unit again.
Note• This unit can only be connected to one device at a time.
• This unit can register up to 8 devices. 
When the number of registered devices exceeds the maximum limit, a device that has not 
made a Bluetooth
® connection for the longest time will be replaced. This will cancel the 
registration of the device. To use the device again, re-register it.
• If the unit connected to the AC adaptor is selected from a Bluetooth
® device, the unit will turn 
on automatically even when it is turned off, establishing a Bluetooth® connection.
• If the image and sound are out of sync during playback, restart the playback app you are  using. If the problem persists, connect the Bluetooth
® device and this unit with an audio cable 
(commercially-available).
• The One-Touch Connection may not work properly depending on the type of device being  used.
• Depending on the specifications and settings of a device, it can fail to connect or some  operations can be different.
• Refer to the operating instructions of the Bluetooth
® device for details.
Switching the communication quality
Disconnecting Bluetooth
®
SC-NA30_10PPC_VQT5C36_eng.book  12 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
13
This mode minimizes power consumption of the battery by lowering the speaker 
output. (>8)
Press and hold [LP] for 2 seconds or more until the LP mode indicator 
(green) lights up.
The LP mode is enabled.• Press and hold [LP] for 2 seconds or more again will return the setting back to the normal mode.
Note• Even when the AC adaptor is connected, LP mode remains enabled.
• In LP mode, even when the volume knob is adjusted, the volume of the unit may not increase.
• Turning off the LP mode may cause the volume to jump up suddenly. Before turning off the LP  mode, lower the volume.
You can listen to audio via the AUX IN jack ( >6, 7) when this unit is connected to 
a device with an audio cable (commercially-available).
Note• When using the AUX input, AUX input has priority than the Bluetooth® features and NFC 
features. 
(It will be possible to receive a call hands-free by pressing [   ] when there is a call coming 
in on the device connected with Bluetooth
®. > 14)
• The setting of the Bluetooth® is not changed even if the audio cable (commercially-available) 
is inserted into AUX IN jack.
• When using the AUX input, the volume may seem low depending on the connected device. In 
that case, check if the volume limit can be changed on the device. For details, refer to the 
manual of the device.
• If an audio cable (commercially-available) is inserted during audio playback with a Bluetooth® 
connection, noise may occur. In this case, stop the playback on the device connected via Bluetooth®.
This unit automatically turns off if there is no audio input and no operation is 
performed for approximately 10 minutes.
Note• If the AUX IN jack is in use while the AC adaptor is connected, this function will not work.
• This function may operate even when the music is being played back if the volume of the  connected device is low.
• This function may not operate depending on the connected device.
• When the DC OUT terminal is in use, this function will not work.
[NA30]
• The Auto Power Off function is activated, the retractable panel w ill remain lowered when the unit 
is turned off. To leave the retractable panel raised when the unit is turned off, press [Í/I] twice.
Using LP mode
Using the AUX input
Auto Power Off
SC-NA30_10PPC_VQT5C36_eng.book  13 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
14
If receiving a call on the mobile phone connected to this unit with Bluetooth®, you 
can make a hands-free call through this unit.
Preparation
Connect this unit and the mobile phone with Bluetooth
®.
∫ Receiving a call
Press [   ] when this unit rings.
• When receiving the call, the Bluetooth® indicator (blue) on the unit blinks.
• Talk into the microphone ( >6, 7) on this unit.
∫ Ending the call
Press [   ].
Note• Adjust the volume during a call with volume knob on this unit.
• When the mobile phone and the unit are connected with Bluetooth®, even if you receive a call 
and have a conversation on the mobile phone, the unit may also output the incoming voice. To 
switch from a hands-free call using the unit to a call using only the mobile phone, operate the 
mobile phone.
• If a call is received during audio playback using a Bluetooth
® connection, the sound will 
automatically switch to the ringtone. 
If a call is received while the AUX IN jack is in use, the sound will switch to the ringtone of the 
mobile phone connected with Bluetooth
®.
• If you touch other devices to the NFC touch area of this unit when receiving a call, Bluetooth® 
connection will not switch.
• To mute the ringtone, turn the volume knob of the unit to [- VOL] until no sound can be heard.
• Some apps for the mobile phone may not be available for hands-free.
• In a place with poor mobile phone reception, it may be harder to have a conversation. Use the  mobile phone in a place with good reception.
• In a place where voices echo considerably, such as an area near a wall, it may be harder to  have a conversation. Before using the unit, move it away from the wall or lower its volume.
Perform the following when you want to delete pairing device information, etc.
Preparation
Turn off the unit, and remove the AC adaptor.
Press and hold [ Í/I] for 10 seconds until Bluetooth
® indicator (blue) and LP 
Mode indicator (green) blink twice.
The pairing device information will be deleted by the reset, so it will be necessary to 
perform pairing again. Delete the pairing information for this unit from the 
Bluetooth
® device, then perform the pairing operation again. ( >10, 11)
Receiving a call hands-free
To return to the factory preset state
SC-NA30_10PPC_VQT5C36_eng.book  14 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
15
Before requesting service, make the following 
checks. If you are in doubt about some of the 
check points, or if the solutions indicated in 
the following guide do not solve the problem, 
refer to “Customer Services Directory (United 
States and Puerto Rico)” (
>21) if you reside 
in the U.S.A. or Puerto Rico, or refer to 
“Limited Warranty (ONLY FOR CANADA)” 
(
>22) if you reside in Canada.
[NA30]The retractable panel is not operating correctly.• The Auto Power Off function is activated, 
the retractable panel will remain lowered 
when the unit is turned off. To leave the 
retractable panel raised when the unit is 
turned off, press [
Í/I] twice.
Sound from the device is cut off.• Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless 
telephones, etc., may result in connection 
interruptions. Increase the distance 
between this system and these devices.
• Do not place the unit in a place where radio  waves will be blocked, such as a metal cabinet.
• The device is out of the 10 m (33 ft.) communication range. Move the device nearer 
to this unit. (See “About Bluetooth
®” >4)• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device.
• Select “Emphasis on connectivity” for  stable communication. (See “Switching 
the communication quality” 
>12)
• When a PC and the unit are connected  with Bluetooth
®, check the sound output 
destination setting of the PC. If the 
sound skips or is not output correctly in 
other ways, perform “To return to the 
factory preset state” (
>14), and 
register the unit to the Bluetooth® 
device again. (>10, 11)
• Depending on the device connected to  the unit, sound may be cut off or noise  may be produced. When this happens, 
lower the volume of the device.
• When both the AUX IN jack and DC IN 
terminal are in use, noise may occur 
depending on the connected device. In 
this case, disconnect the AC adaptor.
The volume does not increase.
• Check the volume of the unit or the Bluetooth
® device.
• In LP mode, even when the volume  knob is adjusted, the volume of the 
unit may not increase. In this case, 
turn off the LP mode. ( >13)
The device cannot be connected.
• Refer to the operating instructions of 
the device, and perform the pairing 
operation again. (See “Pairing with 
Bluetooth
® device”  >10)
• Make sure that this unit is not  connected to a different device.
• The registration information of the unit may 
have been deleted from the Bluetooth® 
device. Register the unit again.
• Delete the registration information of 
the unit through the Bluetooth® menu, 
etc. on the Bluetooth® device first, and 
try to register the device again. (>14)
The device is connected but audio 
cannot be heard from this unit.
• For some built-in Bluetooth® devices, you 
have to set the audio output to “SC-NA30” or 
“SC-NA10” manually. Read the operating 
instructions of the device for details.
• When the AUX IN jack is in use, the 
jack takes priority over the Bluetooth® 
function or the NFC function.
This unit is not operating correctly. 
For example, this unit turns off all of 
a sudden or all indicator blink.
• Using a paper clip or similar material,  press the [RESET]. ( >6, 7)
Troubleshooting
SC-NA30_10PPC_VQT5C36_eng.book  15 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
16
The One-Touch Connection (NFC 
feature) is not working.
• Turn on the NFC feature of the device.
Volume is low when this unit is 
connected to a TV via Bluetooth®.• Adjust the volume on the TV. The 
volume of headphone output may be 
coupled with the volume of the 
Bluetooth
® output depending on the 
TV. In such case, adjust the volume 
of the headphone output on the TV.
∫ Amplifier section
∫Speaker section
Specifications
RMS Output Power (AC Adaptor)Normal Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
5 W per channel (1 kHz, 6 ≠)
Subwoofer:
10 W per channel (100 Hz, 3 ≠)
Total RMS output power: 20 W
[NA10]10 % total harmonic distortion
Front ch (both ch driven):
5 W per channel (1 kHz, 6 ≠)
Total RMS output power: 10 W
RMS Output Power (Battery)Normal Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
4 W per channel (1 kHz, 6 ≠)
Subwoofer: 8 W per channel (100 Hz, 3≠)Total RMS output power: 16 W[NA10]10 % total harmonic distortion
Front ch (both ch driven):
4 W per channel (1 kHz, 6 ≠)
Total RMS output power: 8 W
RMS Output Power (AC Adaptor/Battery)Long Play Mode
[NA30]
10 % total harmonic distortion
Front ch (each ch driven):
2 W per channel (1 kHz, 6 ≠)
Subwoofer: 4 W per channel (100 Hz, 3≠)Total RMS output power: 8 W
[NA10]10 % total harmonic distortion
Front ch (both ch driven):
0.5 W per channel (1 kHz, 6 ≠)
Total RMS output power: 1 W
FTC Output Power (AC Adaptor)[NA30]1.0 % total harmonic distortion
Front ch (both ch driven):
250 Hz j 16 kHz 3.5 W per channel (6≠)Subwoofer: 70 Hz  j 500 Hz 3 W (3 ≠)
Total FTC power: 10 W
[NA10]1.0 % total harmonic distortion
Front ch (both ch driven):
250 Hz j 16 kHz 3.5 W per channel (6≠)Total FTC power: 7 W
Front Speaker (L/R)[NA30]Type:1 way 1 speaker system (Closed type)Unit(s): 5 cm k2(2 qk2)
Impedance: 6 ≠
[NA10]
Type:1 way 1 speaker system (passive radiator type)Unit(s): 4 cm k2(1 5/8qk 2)
Impedance: 6 ≠
[NA30] SUBWOOFERTy p e :1 way 1 speaker system (passive radiator type)Unit(s): 8 cmk1(3 1/8qk 1)
Impedance: 3 ≠
Passive Radiator[NA30] Unit: 8 cm k2(3 1/8qk2)[NA10]  Unit: 8 cm k 1(3 1/8qk1)
SC-NA30_10PPC_VQT5C36_eng.book  16 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
17
∫Bluetooth® section
∫ Microphone section
∫ Terminals section
∫ Accessories section
∫ General
Note• Specifications are subject to change without 
notice.
• Mass and dimensions are approximate.
• Total harmonic distortion is measured by a  digital spectrum analyzer.
* By the measurement method prescribed in  the provisions
Bluetooth® system specificationVe r. 3 . 0Wireless equipment classificationClass 2(2.5mW)Supported profilesA2DP/AVRCP/HFPSupported codecaptXR, AAC, SBCFrequency band2.4 GHz band FH-SSOperating distanceApprox. 10 m (33 ft.) Line of sightProspective communication distance. Measurement environment: Height 1.0 m (3.3 ft.)
Ty p eMono
DC IN12 V 3 AAUX inputStereo  ‡3.5 mm (1/8q) jackDC OUT (USB A type)(5 V 1 A) Supply output only power-on
AC AdaptorINPUT: AC 100 V to 240 V 50/60 Hz 
800 mA
OUTPUT: DC 12 V 3 A
Power supply[NA30]DC 12 V 3 AInternal Battery: 7.2 V (Li-ion: 2900 mAh)[NA10]DC 12 V 3 AInternal Battery: 7.4 V (Li-ion: 1240 mAh)
Power consumption[NA30]  Approx. 16  W
[NA10]  Approx. 12  W
Power consumption in standby modeApprox. 0.4  WBattery Life in Use (Bluetooth®: SBC mode)[NA30]
Normal Mode: Approx. 14 h*
LP Mode: Approx. 20 h*
[NA10]
Normal Mode: Approx. 10 h*
LP Mode: Approx. 20 h*
Battery Charge Time (25oC (77oF) )Approx. 3 hDimensions (W k H k D)[NA30]:
244 mm  k 144 mm k 48 mm
(9 5/8q k  5 11/16q k  1 29/32q)[NA10]:204 mm k105 mm k 41 mm (With cover)(8 1/32q k  4 5/32q k  1 5/8q)200 mm k 99 mm k 29 mm (Without cover)(77/8q k  3 29/32q k  1 5/32q)Mass (Weight)[NA30]
Approx. 930 g (2.05 lbs)
[NA10]
Approx. 520 g (1.15 lbs)
(With cover)Approx. 415 g(0.92 lbs) (Without 
cover)
Operating temperature range0 oC to  i40oC (i32 oF to i104 oF)Charge temperature range10oC to i35 oC (i50oF to i95oF)Operating humidity range35% to 80% RH (no condensation)
SC-NA30_10PPC_VQT5C36_eng.book  17 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
18
• Use up the battery before disassembling. (For Cautions of the battery >3)
• Keep the sheets and the screws out of reach of children to prevent swallowing.
∫ How to disassemble the SC-NA30
To remove the battery when disposing of this 
unit
The following instructions are not intended for repairing 
purposes but for the disposal of this unit. This unit is not 
restorable once disassembled.
When disposing of this unit, take out the battery installed in this unit and 
recycle it.





• Insulate the  A with cellophane tape or similar.
• Do not disassemble the battery.
SC-NA30_10PPC_VQT5C36_eng.book  18 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
19
∫
How to disassemble the SC-NA10
 



 

• Insulate the 
A with cellophane tape or similar.
• Do not disassemble the battery.
SC-NA30_10PPC_VQT5C36_eng.book  19 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
20
Limited War ranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Products Limited Warranty
Limited Warranty Coverage 
(For USA and Puerto Rico Only)
If your product does not work properly 
because of a defect in materials or 
workmanship, Panasonic Corporation of North 
America (referred to as “the warrantor”) will, 
for the length of the period indicated on the 
chart below, which starts with the date of 
original purchase (“warranty period”), at its 
option either (a) repair your product with new 
or refurbished parts, (b) replace it with a new 
or a refurbished equivalent value product, or 
(c) refund your purchase price. The decision to 
repair, replace or refund will be made by the 
warrantor.
During the “Labor” warranty period there will 
be no charge for labor. During the “Parts” 
warranty period, there will be no charge for 
parts. This Limited Warranty excludes both 
parts and labor for non-rechargeable batteries, 
antennas, and cosmetic parts (cabinet). This 
warranty only applies to products purchased 
and serviced in the United States or Puerto 
Rico. This warranty is extended only to the 
original purchaser of a new product which was 
not sold “as is”.
Mail-In Service--Online or Telephone
Repair Request
Online Repair Request
To submit a new repair request and for quick repair 
status visit our Web Site at www.panasonic.com/
repair.Telephone Repair RequestYou may contact us at: 1-800-211-PANA (7262)
When shipping the unit, carefully pack, include 
all supplied accessories listed in the Owner’s 
Manual, and send it prepaid, adequately 
insured and packed well in a carton box. When 
shipping Lithium Ion batteries please visit our 
Web Site at www.panasonic.com/
BatteryHandling as Panasonic is committed to 
providing the most up to date information.  
Include a letter detailing the complaint, a 
return address and provide a daytime phone 
number where you can be reached. A valid 
registered receipt is required under the Limited 
Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to 
defects in materials or workmanship, and 
DOES NOT COVER normal wear and tear or 
cosmetic damage. The warranty ALSO DOES 
NOT COVER damages which occurred in 
shipment, or failures which are caused by 
products not supplied by the warrantor, or 
failures which result from accidents, misuse, 
abuse, neglect, mishandling, misapplication, 
alteration, faulty installation, set-up 
adjustments, misadjustment of consumer 
controls, improper maintenance, power line 
surge, lightning damage, modification, 
introduction of sand, humidity or liquids, 
commercial use such as hotel, office, 
restaurant, or other business or rental use of 
the product, or service by anyone other than a 
Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts 
of God.
Product or Part Name Parts Labor
Wireless Speaker 
System
1 Year 1 Year
All included 
Accessories
(Except Non-
Rechargeable 
Batteries) 90 Days
Not 
Applicable
Only Non-
Rechargeable Batteries 10 DaysNot 
Applicable
SC-NA30_10PPC_VQT5C36_eng.book  20 ページ  ２０１３年８月８日　木曜日　午前１０時３９分