Panasonic Wv Q169 Mul Instructions Manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Ceiling Mount Bracket
Instructions
Model No.WV-Q169
FRANÇAIS
ENGLISH 

All work related to the installation of this product should be made by qualified service
personal or system installer.
Use this apparatus for indoor use only.
Installation area
• Consult the dealer about the installation area to select a strong ceiling area. Make sure that
the installation area is strong enough to hold the total weight of the camera assembly
(approx. 2.2 kg{4.85 lbs}) before installation.
• The installation area shall have 210 mm {8-1/4} or more space behind the ceiling.
• The thickness...

3
Avoid installing in the following locations.
• Locations where it may get wet from rain or water splash
• Locations where a chemical agent is used such as a swimming pool (not only outdoor) 
• Locations subject to steam and oil smoke such as a kitchen 
• Locations where radiation or x-ray emissions are produced 
• Locations where it may be damaged by briny air such as seashores
• Locations where the temperature is not within –10 °C to +50 °C {14 °F to 122 °F}.
• Locations subject to vibrations (This...

4
Major Operating Controls and Their Functions 
WV-NW484S
Roof space
Safety wire angle (Accessory)
Safety wire (Accessory)
* Read the Operating Instructions of
the camera as well. 
Installations
Be sure to read Precautions on the page 2 before installation. The Operating Instructions of
the color CCTV camera, WV-NW484S, shall be read as well.
1. Put Template A (accessory) against the ceiling and make a hole.
qMake 4 holes of 12 mm {1/2} in diameter.
wRemove the center part from the tem-
plate.
eMake a...

2. Install two anchor bolts (locally procured: M10 recommended) into the concrete ceil-
ing.
qInstall an anchor bolt in the
center of the hole made in the
step 1.
wDetermine the anchor bolt
length by use of Template B
(accessory).
eUse Template B (accessory) to
decide the nut position, and fix
it.
(Mount the nut so that the dis-
tance between the bottom sur-
faces of the nut and ceiling is
adjusted to 134 mm {5-1/4}.)
Note:If there is already an anchor bolt installed, the anchor bolt can be used as a 2nd...

Important:When securing this bracket
on the ceiling, make sure that the
four ceiling board fixing brackets are
open as shown in the following fig-
ure.
7. Use double nuts (locally procured) to
secure the mount bracket after insert-
ing the 1st anchor bolt. 
8. Use the driver bit supplied with the
camera to remove the screws that
secure the camera enclosure and
remove the enclosure from the camera
main body. 
Important:Refer to the Operating Inst-
ructions of the camera as well. 
9. Perform camera...

7
10. Align the screw holes of the mount
bracket with the 4 mounting screws of
the camera main body and tighten
them. 
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
Note:The mount bracket supplied with
the camera is not used.
11. Mount the camera enclosure on the
camera main body.
Hooks for the
decorative
cover
Projection
12. Mount the decorative cover on this
mount bracket.
• Mount the decorative cover on the cam-
era mounting plate with engaging the
projections of the decorative cover with...

Specifications
Ambient temperature –10 °C to +50 °C {14 °F to 122 °F}
Dimensions 204.4 {8-1/16} mm in diameter x 143.4 {5-5/8} mm in height
Weight Approx. 705 g{1.55 lbs}
Finish Main body: Metal
Decorative cover: ABS resin with light silver coating
Standard Accessories
Instructions (this book)  .................................. 1 pc.
The following are for installation.
Safety wire  ..................................................... 1 pc.
Safety wire angle  ..............................................

9
Tous les travaux d’installation pour ce produit doivent être réalisés par des techniciens
qualifiés ou des installateurs de système confirmés.
Cet appareil est essentiellement conçu pour un usage sous abri.
Secteur dinstallation
• Consulter le distributeur à propos de la surface dinstallation afin de choisir une surface
dinstallation au plafond suffisamment robuste. Il convient de sassurer que la surface
dinstallation est suffisamment robuste pour supporter le poids total de lensemble de
caméra vidéo...

10
Éviter toute installation dans les emplacements suivants.
• Emplacements risquant dêtre humides par la pluie ou des éclaboussures deau
• Emplacements où des agents chimiques sont utilisés comme dans le cas dune piscine
(mais non limité à lextérieur)
• Emplacements exposés à de la vapeur ou des émanations dhuile comme dans le cas
dune cuisine
• Emplacements où il existe des radiations ou une émission de rayons X
• Emplacements où léquipement risque dêtre endommagé par de lair salin comme au bord
de la...