Philips 190c8f User Manual

Installing Your LCD Monitor 
l     For best performance, ensure that your display settings are set at 1280x\
1024, 60Hz.
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called 
RESOLUTION.
 
RETURN TO TOP OF THE PAGE 
 
         
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/install\
.htm (3 of 3)2008-3-31 12:40:41 

Connecting to Your PC
   
        
 
 
 
 
• Front View Product 
Description
 • Accessory Pack
 • Connecting to Your PC
 • Getting Started 
 • Optimizing Performance
 • The base 
  
   
   
   
   
   
Connecting to Your PC
Accessory Pack
Unpack all the parts. 
 
Power cord 
 
VGA cable 
 
EDFU pack
RETURN TO TOP OF THE PAGE 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
.htm (1 of 3)2008-3-31 12:40:55 

Connecting to Your PC
 
Connecting to Your PC1) Connect the power cord to the back of the monitor firmly. (Philips has\
 pre-connected 
VGA cable for the first installation.
 
    
 
   
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
.htm (2 of 3)2008-3-31 12:40:55 

Connecting to Your PC
2) Connect to PC  (a)
Turn off your computer and unplug its power cable.
  (b)
Connect the monitor signal cable to the video connector on the back of y\
our 
computer.
  (c)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
  (d)
Turn on your computer and monitor. If the monitor displays an image, 
installation is complete.
 
RETURN TO TOP OF THE PAGE 
        
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/connect\
.htm (3 of...

The Base
   
        
 
   
 
• Front View Product 
Description
 • Accessory Pack
 • Connecting to your PC
 • Getting Started 
 • Optimizing Performance
 • Unfold the Base
 • Fold the Base
  
 
   
 
   
 
   
 
   
 
   
 
The Base
Unfold and Fold the Base
Unfold the Base1) Put monitor face down on the safe surface.
2) Pull up the base.
      
 
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
m (1 of 3)2008-3-31 12:40:55 

The Base
 
Fold the Base 1) Push down the head of monitor.
  
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
m (2 of 3)2008-3-31 12:40:55 

The Base
 
RETURN TO TOP OF THE PAGE
        
file:///D|/make%20CD/190C8%20CD/lcd/manual/English/190C8/install/base.ht\
m (3 of 3)2008-3-31 12:40:55 

Getting Started
   
        
 
 
Your LCD Monitor :
 
• Front View Product 
Description
 • Setting Up and Connecting 
Your Monitor
 • Getting Started 
 • Optimizing Performance
  
 
   
   
   
   
   
   
 
Getting Started 
Getting Started 
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vist\
a or later
 
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
 requirements for 
Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) shou\
ld be installed in...

Getting Started
 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select Monitor  
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please 
stop installation.  
- If the Properties button is active. Click on Properties button. Pl\
ease follow the steps 
given below. 
6.  Click on Driver and then click on Update Driver... then...

Getting Started
10.  Click on the Have disk... button, then click on the Browse... button\
 and then select the 
appropriate drive F: (CD-ROM Drive).
11.  Click on the Open button, then click the OK button.
12.  Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing to verify \
its compatibility with 
Windows® XP message, please click on the Continue Anyway button. 
13.  Click on the Finish button then the Close button.
14.  Click on the OK...