Philips 202e2sb User Manual
Here you can view all the pages of manual Philips 202e2sb User Manual. The Philips manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 41
39 WHO IS COVERED? You must have proof of purchase to receive warranty ser vice. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner's manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For two years thereafter, all par ts will be repaired or replaced, and labor is free. After two years from the day of purchase, you pay for the replacement or repair of all par...
Page 42
40 Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for ser vicing: Philips Customer Care Center (877) 835-1838 or (919) 573-7855 (In U.S.A., Puer to Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a par ticular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty...
Page 43
41 Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfor tunately, something should go wrong with this product Philips guarantees free of charge labor and replacement par ts irrespective of the countr y where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of...
Page 44
42 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer ser vice representative. Common Problems No Picture (Power LED not lit) • Make sure the power cord is plugged into the power outlet and into the back of the monitor. • First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position. No Picture (Power...
Page 45
43 Horizontal flicker appears • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the ver tical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. • Uninterrupted display of still or static images over...
Page 46
44 7.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restar t your PC and see if Smar tControl Lite can work. Otherwise, you will need to remove and re-install Smar tControl Lite to ensure proper driver is installed. Q2. The SmartControl Lite functions worked well before, but it does not work anymore, what can I do? Ans.: If the following actions were executed,...
Page 47
45 7.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for Philips 20": 1600 x 900 @60Hz. • Unplug all cables, then connect your PC to the monitor that you used previously. • In the Windows Star t Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab....
Page 48
46 Q8: Can I change the color setting of my monitor? Ans.: Yes, you can change your color setting through OSD control as the following procedures, • Press "OK" to show the OSD (On Screen Display) menu • Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. 1. Color Temperature; The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K....
Page 49
47 "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave...
Page 50
48 2010 © Koninklijke Philips Electronics N.V. All r ights reser ved. Philips and the Philips Shield Em blem are registered t radema rks of Koninklijke Philips Electronics N. V. and are used under license from Koninklijke Philips Elec t ronics N.V . Specif ications are subject to change without notic e. V er sion: M2202E1T