Philips 26pf9531 User Manual

							Set code/Change code
This allows you to set or change the personal 4-digit access
code that is used in the different lock functions of the TV.
If no PIN-code exists yet, the menu item is set to Set
code. Follow the instructions on screen.
>If a PIN-code has previously been entered, the menu
item is set to Change code. Follow the instructions on
screen.
The Features menu reappears with a message confirming
that your PIN-code has been created or changed.
On timer
From standby, this automatically switches the TV to the
specified channel number, at a specified time.
1. Select On timer.
2. Press the cursor right to enter the On timer menu.
3. Select Timerand press the cursor right.
4. Select On.
5. Select Channeland then the TV channel you want your TV
to switch to on a selected time and day
6. Select Dayand then a day of the week or select Daily.
7. Select Timeand enter the time with the digit keys or with
the cursor up/down.
8. Press the 
OKkey to activate.
9. Press the cursor left to return to the Features menu or
press the 
MENU/BROWSEkey to switch off the menu.
EN
21
Adjust feature menu settings  (Continued)
21
Note: From now on,every week, your TV  will
automatically switch to the selected channel, on the
selected day, at the selected time, until the On timer
function is switched off again.
Info
TV menuFeatures
Subtitle
Sleeptimer
Childlock
Set/Change code
On timer
DemoTV settings
Features
Installation
Exit
Demo
This allows you to get an idea of the features that are part
of the television.
1. Select Demo.
2. Press the cursor right.
3. Select a desired demo.
4. Press the 
OKkey to start the demo.
>The selected demo is played once.
5. Press the red colour key to stop the demo and to return to
the demo menu.
6. Press the red colour key to exit the demo menu.
Info
TV menu
Features
Demo
Pixel Plus
Settings assistant
Active control
Subtitle
Sleeptimer
Childlock
Set/Change code
On timer
Demo
 
						

							How to search for and store TV channelsEN
22
Select your country
This allows you to select the country where you are now
located. This menu allows you to select your preferred menu language.
1. Select the language menu item and enter the list of available
languages with the cursor right.
2. Select your language with the cursor up/down.
3. Press the 
OKkey to confirm your selection.
Select your menu language
This menu will adjust settings related to the installation of the
TV channels, language and country and to the initial installation
of your TV.
1. Press the 
MENU/BROWSEkey on the remote control.
>The main menu appears.
2. Select TV menuand press the cursor right.
>The TV Menu is moved to the left.
3. Select Installationand press the cursor right.
>The Installation menu is moved to the left panel.
4. Use the cursor up/down to select the Installation menu
items.
5. Press the cursor right to enter the selected Installation
menu item.
6. Use the cursor keys to make a selection.
7. Press the 
OKkey to activate or to confirm.
8. Press the cursor left to return to the Installation menu or
press the 
MENU/BROWSEkey to switch off the menu.
Installation menu
Tip: you will need this chapter only if you want to change the installation settings.
Info
TV menuInstallation
Languages
Country
Channels
Preferences
Connections
Decoder
.............TV settings
Features
Installation
Exit
Info
TV menu
Installation
Languages
Menu language
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Television
MultimediaTV menu
TV channels
 
						

							EN
23
How to search for and store TV channels  (Continued)
Info
TV menu
Installation
Channels
Autom. installation
Manual installation
Rearrange
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
After language and country are set correctly, you can now
search for and store the TV channels.
All available TV channels are searched for and stored
automatically.
This will take a few minutes.
>When the search is complete, the menu will indicate the
number of channels found.
Manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels.
1. Select Manual installationand press the cursor right.
2. Select System.
3. Select your country or part of the world where you are
now located.
4. Select Searchand press the cursor right.
5. Select the red or green colour key to proceed.
6. Press the cursor left to store the channel found or to
search for another channel.
7. Select Fine tuneand press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
8. Select Store current channelif you want to store the
frequency under the current channel number.
Press the cursor right and confirm with the 
OKkey.
Select Store as new channelif you want to store the
frequency under a new channel number.
Press the cursor right and confirm with the 
OKkey.
9. Use the rearrange menu to rename or reshuffle the
channels.
Store TV  channels
Tip: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
 
						

							This allows you to rename, to reshuffle and to uninstall or
reinstall the stored channels.
The uninstalled channel is indicated in the list by an icon
in front of the uninstalled channel.
3. Press the green colour key again to reinstall the uninstalled
channel.
Rearrange the channel number listEN
24
Notes:
- press the yellow colour key to delete all characters. The
cursor is positioned at the beginning again;
- press the blue colour key to delete the character the
cursor is positioned. Enter a new character with the
cursor up/down;
- a name can be given to the channel numbers 0 to 999;
- space, numbers and other special characters are located
between Z and A.
Rearrange
0
1
2
3
4
5
6
7
Rename UninstallMove
upMove
down
Info
TV menu/Installation
Channels
Rearrange
0
1
2
3
4
5
6
7
Automatic instal...
Manual installat...
Rearrange
Info
TV menu
Installation
Channels
Autom. installation
Manual installation
Rearrange
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
 
						

							This menu contains items that can set or adjust various special
TV functions and that will typically be accessed only
occasionally.
Select your location
This allows you to select the location of your TV.
If you choose for Shopit will result in fixed settings of
picture and sound.
The location Homewill give full flexibility to change any
predefined settings for picture and sound.
Select Teletext  2.5
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures in the
teletext pages.

						

							EN
26This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
1. Select Connections.
2. Press the cursor right.
3. Select the input to which the peripheral equipment is
connected.
>When you select 
EXT1,EXT2,EXT3,HDMI 1,
HDMI 2,Sideor Digital Audio  In, a list appears
which allows you to identify which type of peripheral
equipment is attached to this input.
4. Press the cursor right again to enter the list of types of
peripherals connected to the selected input.
5. Select the peripheral equipment with the cursor up/down.
Digital Audio  In
If a peripheral equipment has a digital audio output, you can
connect this with a single cable to the TV’s DIGITAL
AUDIO INconnector.
In the Connections menu, assign the Digital Audio In to the
corresponding external input to which your peripheral
equipment is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO  OUTconnector to an external amplifier
or receiver. If your amplifier or receiver has a matching
connector for Digital Audio In, you can connect it with a
single cable to the TVs 
DIGITAL AUDIO  OUT.
See To make video and audio connections, Connect a Home
Cinema amplifier, p. 42.
Select your connections
Select a Decoder channel number
This allows you to define one or more channel numbers as
decoder channel numbers when a decoder or a descrambler is
connected to 
EXT1or EXT2.
1. Select the channel number under which you have stored the
programme that comes from your decoder or descrambler.
2. Select Status.
3. Select the input used to connect your decoder:None,
EXT1or EXT2.

						

							Reset the Factory settingsEN
27 This allows you to upgrade your TV software using a USB
device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV. The memory device must
be filled with the appropriate upgrade image (and structure)
which can be found on the www. philips.com/software
website.
How to upload a new software version on your memory
device, see Annex 2, Philips TV software upgrade with
portable memory, p. 47.
Automatic software announcement (if present)
When you switch on your TV a message may appear that a
new software upgrade is available.

						

							Create your favourite listEN
28
®® ®
®
MHEG
CANCEL
v
†
π
‡
Ò
FAV®
FAV
This allows you to select up to four favourite channels lists with
y
our preferred TV channels and radio stations. For example, each
member of your family can create his/her own favourite list.
In addition to the favourite channel lists you may also select a list
with only digital TV channels or a list with only the radio
channels or a list with only the analogue channels.
1. Press the 
FAVke y (or the OKkey).
> The last selected channel list appears.
2. Use the cursor up/down to select a channel.
3. Press the 
OKke y to display the selected channel.
1. Press the 
FAVkey.
> The last selected channel list appears.
2. Press the red colour key to bring up the list of possible favourite channel lists.
3. Use the cursor up/down to select a list.
4. Press the 
OKkey.
5. Press the 
FAVke y again to exit.
1. Press the 
FAVkey.
> The last selected channel list appears.
2. Press the red colour key. >A list with all possible favourite channel lists appears.
3. Use the cursor up/down to select a Favourites (1 to 4) channel list.
4. Press the 
OKkey.
5. Press the green colour key to enter the Edit mode. >The selected Favourite list will bring up a full channel list.
6. Use the cursor up/down to select a channel.
7. Press the OK key to check or uncheck the highlighted
channel and to add it to or remove it from your selected
favourite list.
8a.  The modified favourite channel list appears.
< Press the 
FAVke y again to exit.
> With the 
–P+key you will be able to browse through
the TV channels of the selected list.
8b. Press the red colour key to remove the channel list.
Note: when this key is pressed the first time after you have
finished the installation, it will bring up the full channel list. In
other situations it will bring up the last selected channel list.
Note: with the digit keys you can still select channels which
are not marked as favourite.
To   select a channel from the displayed favourite list
To  select another favourite channel list
To  create a favourite list or to modify the list
Favourites 1 EXT1
EXT2HDMI
2 Digital channel 1 
3 Digital channel 2 
4 Radio channel 1 45  Data channel 1
Exit Leave edit 
Press the OK key to mark /
All channels All
TV channels Radio channels 
Analogue Favourites 1 Favourites 2 Favourites 3 3Favourites 4 
Change list 
 
All channels  EXT1
EXT2
1 Analogue channel 1 2 Digital channel 1 
3 Digital channel 2 
4 Radio channel 1 25  Data channel 1
Change list 
Tune to a channel by pressing OK. 
1 Analogue channel 1 
b
b
A
b
A
A
HDMI
unmark.
Use -P+ for page up/down.
Use cursor up/down to select and 
OK to confirm. 
 
						

							The Multimedia browser lets you display pictures, movies or
play audio files stored on a USB device. The Multimedia browser
application is invoked from the main menu.
-Following file formats can be reproduced:
for pictures: JPEG
for audio: MP3, MP3 Pro, LPCM
for video: MPEG1, MPEG2
- Only FAT/DOS-formatted memory devices are supported.
- Philips can not be held responsible if your USB device is not
supported.
To insert a USB device
In case of a USB-memory stick or a digital camera, connect
it to the USB connector at the side. See To make video and
audio connections, Side panel overview, p. 35.
When a USB device is inserted, the Multimedia browser
menu is displayed automatically. See further.
To remove the USB device
1. Press the MENU/BROWSEkey on the remote control to
switch off the main menu.
2. Remove the USB device.
Multimedia BrowserEN
29
+
-+
-
DVD STB TV VCR AUX
MENU
123
456
789
0
®
®®
®
SELECTDEMO
BROWSE
a
0OPTION
AV
OK
B
i
b
b
¬
PV
MENU
BROWSE
To view content from a USB device
Tip: if your USB device does not fit into the USB connector at
the side, use an USB extend cable to connect the USB device
to the USB port. Ask your dealer for more information.
Note: USB devices are not supplied with this TV.
 
						

							Multimedia Browser menu
1. Insert a USB device.
2. Select the USB device under Multimedia with the cursor
up/down.
>The Multimedia browser allows you to browse content
stored on the inserted USB device.
>The 2-panel browser will be shown with the left panel
containing the content types (Music, Pictures, Movies).
>The right panel will display the content that is available
of the selected content type.
3. Press the cursor right to enter the content.
4. Press the cursor up/down to select a content.
5. Press the cursor right to enter the content.
6. Press the cursor up/down to select a file or a directory.
7. In case a fileis selected, press the 
OKkey to display a
picture file or to play a video or an audio file.
In case a directory,albumor playlistis selected, press
the cursor right to enter the content or press the 
OKkey
to start a slide show or a loop playback of the files present.
8. Press the cursor left to keep music playing and switch back
to the Multimedia menu.
9. Press one of the colour keys on the remote control to
perform the corresponding function mentioned at the
bottom of the screen.
10. To stop playing content, press the ‡key on the remote
control.
Multimedia Browser  (Continued)EN
30
Note: press the green colour key to display all the image
files in the current directory as thumbnails when browsing
pictures. Press the green key again to display the image
files in a list.
Tip: the blue colour key can, if necessary, be used to let
the colour keys reappear.
Notes:
- your TV supports slide shows with background music.
See Annex 2, Philips TV-slideshow format with
background music, p. 50;
- the playback will continue to play even if temporarily
switched to browser screens. The audio will be stopped
when another song starts playing, or when the end has
been reached;
- more technical remarks can be found in Annex 3, Philips
TV-Digital camera and USB issues, p. 52.
USBDevice 1
Music
Picture
MoviesPicture
London 2005
The Beatles
Xmas2004.alb
arnold.jpg
USBDevice 1
Picture
London2005
The Beatles
Xmas2004.alb
arnold.jpg
London 2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
USBDevice 1/Picture/London2005
London2005
pic001.jpg
pic002.jpg
pic003.jpg
pic004.jpg
pic001.jpg
pic001.jpg
USBDevice 1/Picture/London2005
London2005                  pic001.jpg
Press OK to play.
Television
MultimediaTV menu
TV channels
Following icons may appear:
folder self made playlist/album
pictures video
music