Philips 26pf9531 User Manual

							Function keys at the bottom of the screen
Details to display a description of the selected file
or directory
Transitions to select if you like to apply a transition
during a slide show 
Slide time to select the duration a picture will be
displayed in a slide show
Rotate to rotate a picture
Repeat one/all to repeat the playback of a music file
Shuffle to shuffle music collections in a random way
Zoom to select one of the zoom magnifications
(x1, x2, x4) with the cursor up/down.
Additionally you can shift the selected zoom
window over the screen with the cursor
keys.
Full/small screen to toggle between a full or a small screen
Multimedia function keys on the remote control
Òto fast rewind displaying content
‡to stop playing content
π- to play a single file, start a slide show, playback of a
folder or other collection
- to pause playing content
†to fast forward displaying content
Multimedia Browser  (Continued)EN
31
789
0
®
®®
®
0AV
MHEG
CANCEL
v
†
π ‡ Ò
FAV®
MHEG
CANCEL
†
π ‡ Ò
Note: to rotate a picture or to select one of the zoom
magnifications, first stop the slide show with the 
OKkey or
the blue colour key.
 
						

							Most TV channels broadcast information via teletext.
This TV has a 1200 pages memory that will store most
broadcasted pages and subpages to reduce waiting time. After
each programme change, the memory is refreshed.
The main index page appears on the screen.
Select a Teletext page

						

							Hypertext
With hypertext you can quickly jump to a pagenumber or
search for a specific word shown on the current teletext
page.
1. Press the 
OKkey to highlight the first word or a number
on the page.
2. Use the cursor up/down, left/right to select any other word
or number you want to search for.
3. Press the 
OKkey to confirm. The search starts.
>A message appears at the bottom of the screen to
indicate the searching, or that the word or page is not
found.
4. Use the cursor up until the top of the page to exit
hypertext.
Enlarge a Teletext page

						

							To make video and audio connections EN
34
Tip: use the inputs that are available on your equipment that provide the best video or audio
performance, as below.
Note: your TV comes with all types of connectors with the exception of the DVI connector but
some of your equipment may be equipped with this type. In this case youll need a DVI to HDMI
adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.
Warning: be sure to connect the DVI output connector first, then connect to the HDMI input on
your TV.
Notes:
- cables are often colour-coded to connectors. Connect red to red, white to white....
- component video (YPbPr) connection is necessary to view video sources, for example digital
broadcastings coming from a settop box, in 1080i, 720p, 576i, 576p, 480i or 480p,
- PC equipped with a VGA connector, see p. 41.
L/RH V
EXT3
AUDIO L / R
L/RH V
EXT3
AUDIO L / R
S-VIDEOHDMI
VIDEO
75
EUROCONNECTOR
Pr Pb Y
R B G
AUDIO L/R
H V
Pr Pb Y
R B
GEXT3
EXT3
Connector table
HDMI
(High-Definition
Multimedia 
Interface)
Component video
(480p/576p/720p/
480i/576i/1080i)
Digital audio
Component video
(480p/576p/720p/
480i/576i/1080i)
Analog audio
Scart
S-Video
Video
RF/CoaxialAudio connection
required
No
Ye s
Ye s
No
Ye s
Ye s
NoBest video performance
 
						

							Camera, Camcorder, Game
1. Connect your camera, camcorder or game as
shown.
2. Connect to 
VIDEO2and AUDIO L3for
mono equipment. For stereo equipment also
connect 
AUDIO R3.
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables with
the 
S-VIDEOinput 1and AUDIOinputs
3.
Headphone
1. Insert the plug into the headphone socket L
as shown.
2. The headphone impedance must be between 8
and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone
volumeto adjust the headphone volume.
USB
See Multimedia browser, p. 29.
To make video and audio connections - Side panel overviewEN
35
35
Warning: do not connect cable 1and 2
at the same time. This may cause picture
distortion !
Tip: Press ¬on the remote control to
switch off the internal loudspeakers of the TV.
1
2
3
USB
 
						

							36
EN
Pr Pb Y
R B G
AUDIO L/RH VEXT2 EXT1EXT3
COMMON INTERFACE75HDMI 1  HDMI 2  ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUT AUDIODIGITAL
Pr Pb Y
R B G
AUDIO L/R
H V
EXT2 EXT1
EXT3
FACE
75
HDMI 1  HDMI 2  ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUTAUDIODIGITAL
CE
AUDIO 
OUT DIGITAL
AUDIO
IN
VGA
DVI
DVI
DVI
CABLE
VCR
DVD player
Satellite
receiver
1 DVD recorder - 1 VCR 
2 DVD recorders
2 VCRs
Decoder
PC DVIPC - VGA
DVD player
Cable box DVD player
Cable boxCable box
Decoder VCR
Digital 
Home Cinema
amplifier Analog 
Home Cinema
amplifierAnalog 
Home Cinema
amplifier
Game console
To make video and audio connections - Rear panel overview
 
						

							Connect a VCR or DVD recorderEN
37
With a eurocable
1. Connect the aerial cables 1and 2as
shown.
2. Connect the eurocable 3as shown.
3. Make your selection of the source to which
the VCR has been connected in the Installation
menu, Select your connections, p. 26.
With the aerial cable only
1. Connect the aerial cables 1and 2as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Manual installation, p. 23.
See also the handbook of your recorder.
Connect a decoder and a VCR
Connect a eurocable 4to your decoder and
to the special euroconnector of your recorder.
See also the handbook of your recorder.
Warning: do not place your recorder too close to the screen as some recorders may be susceptible
for signals from the display. Keep a minimum distance of 0,5 m from the screen.
Tip: you can also connect your decoder
directly to EXT1or EXT2with a eurocable.
EXT2EXT1
75ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL1
3
EXT
1 / 2
2
CABLE
RECORDER
75ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL
RECORDER
1
CABLE
2
RECORDERDECODER
4
 
						

							Note: you can not record signals from equipment connected to the YPbPrinput.
Connect two VCRs or VCR and DVD recorderEN
38
With eurocables
1. Connect the aerial cables 1and 2as
shown.
2. Connect your VCRs or DVD-recorder to
EXT1and 2with the eurocables 4and 5.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26, and link it to 
EXT1or 2.
With aerial cables only
1. Connect the aerial cables 1,2and 3 as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Manual installation, p. 23.
See also the handbook of your recorder.
With a eurocable
1. Connect the aerial cables 1and 2as
shown.
2. Connect your satellite receiver to 
EXT1or 2
with a eurocable 3.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26, and link it to 
EXT1or 2.
With Component Video connectors
See Connect a DVD player, a satellite receiver
or a cable box, p. 40.
Connect a satellite receiver
EXT2EXT1
75ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL
RECORDER
CABLE
12
RECORDER
3
5
EXT
1/2
4
EXT2EXT1
ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL75
1
3
EXT
1 / 2
2
 
						

							Connect a DVD player, Cable box or game consoleEN
39
Note: in case of any problems, see Annex 4:
Issues referring to connected peripherals with a
HDMI connector, p. 52.
With a HDMI connector
HDMI is the leading new standard for Digital video
and audio interconnection.
1. Connect your equipment with the 
HDMI
connector.
2. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26, and link it to 
HDMI 1or 2.
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
With a DVI connector
1. Connect the DVI to HDMI cable to one of the
HDMI connectors of your TV 1.
2. Connect the audio cable 2to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26 and link it 
HDMI 1or 2.
4. Also select Digital audio inin the same
Connections menu.
Connect a DVD player or Cable box 
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
Note: only a DVD player with DVI with digital
sound can be connected to the HDMI
connector.
HDMI 1/2
75HDMI 1  HDMI 2 ANTENNA75o o o
HDMI
75HDMI 1  HDMI 2 ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUT AUDIODIGITAL
Pr Pb Y
R B G
AUDIO L/R
HV
EXT2 EXT1EXT3
HDMI 1/2
HDMI
DVIDIGITAL
AUDIO
IN
1
2
 
						

							Connect a DVD player, a satellite receiver or Cable box EN
40
With Component Video Connectors
1. Connect the three separate component video
cables 1to the YPbPr jacks on the DVD
player and to the Y,Pband Prjacks of 
EXT3
on the TV.
2. Connect the audio cable 2to the digital out
of the equipment and to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26. Also select Digital audio inin the same
Connections menu and link it to 
EXT3.
4. In case of a DVD player with analogue audio,
connect the audio cable to the DVD’s audio 
L
and Rjacks and to theL/R AUDIOjack of
EXT33.
5. In case of a cable box and/or a satellite
receiver also connect the cable TV cable and/or
the satellite antenna cable 4and the aerial
cable 5.
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
Notes:
- cables are often colour coded. Connect red to
red, white to white, etc..;
- the labels for the component video sockets may
differ depending on the DVD player connected.
Although the abbreviations may vary, the letters
B and R stand for the blue and red component
signals, respectively, and  Y indicates the
luminance signal. Refer to the DVD player’s
instructions for use for definitions and
connection details;
- to get an optimal viewing, it is advised to switch
your equipment to the highest possible
supported display modes.
Warning: in case you notice scrolling images,
wrong colours or no colour, no picture, or even
combinations of these on your screen, verify if
the connections are done in the correct way and
if the resolution and the signal standard of the
connected equipment are set in the right way.
See the handbook for your equipment.
Pr Pb Y
R B G
AUDIO L/R
H V
EXT2 EXT1EXT3
DIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL
2
1
DIGITAL
AUDIO
IN
EXT3 :
YPbPr
3
EXT3 :
AUDIO L/R
DVD
75ANTENNA75o
Pr Pb Y
R B G
AUDIO L/R
H V
EXT2 EXT1EXT3
DIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o oAUDIO OUT
LR
OUT AUDIODIGITAL
2
1
DIGITAL
AUDIO
IN
EXT3 :
YPbPr
3
EXT3 :
AUDIO L/R
SAT / STB
CABLE
4
5