Philips Bcool Sv1 Projector User Manual

For computer signal input, the following ‘Picture’adjustments can be made:
Picture adjustments
•Press Menu and select ‘Picture’in the menu bar. The following ‘Picture’adjustments can now
be made according to the instructions under ‘General explanation’:
– Brightness
adjusts brightness of the displayed picture.
– Contrast
adjusts the overall contrast intensity.
– Sharpness
controls the contour impression of the picture.
– Frequency
changes the display data frequency to match the frequency of your...

Features adjustments
Press Menu and select ‘Features’in the menu bar. The following ‘Features’adjustments can now
be made according to the instructions under ‘General explanation’:
– PIP (Picture In Picture)
turns the PIP window on and off. PIP enables projection from a second source in the
currently projected computer or component video picture. The currently projected
computer or component video picture can also be used as input source.
Please note that the second source can only be displayed in the...

Setup adjustments
•Press Menu and select Setup in the menu bar. The following Setup adjustments can now be
made according to the instructions under ‘General explanation’:
– Language
selects the required menu language.
– Keystone
corrects picture distor tion of the ver tical keystone type by internal scaling.
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen.
-- Source
selects the current projection source (Computer, YPbPr,...

When handled with care, your projector offers you years of enjoyment. And of course handling
with care also means preventing your valuable projector from being stolen. As a useful
protection aid, Philips offers you SecurityMax.
•SecurityMax is a menu item that works as a theft deterring feature. Unauthorized use of
your projector is prevented once you have set up the projector with the remote control.
•A code protected star t-up screen and shutdown timer will make theft unattractive to any
potential...

Setting up SecurityMax
1Make sure the projector is properly connected (see the user manual on the manual CD-ROM).
2Turn on the projector.
–The projector Star tup screen will be projected.
3Press Menu and select ‘Setup’in the menu bar. Select the SecurityMax item.
–
The SecurityMax main window appears. Each tab represents a specific SecurityMax feature.
Setting a Security code
1Click the Security code tab in the main window.
–The Security code window appears with the Characters selection table.
2Enter...

3Enter your new code in the second field by using the 4-directional Cursor Control to select
characters in the selection table and press the OK button to save. The code may consist of
any combination of 4 characters and/or digits.
4To confirm, also enter your new code in the third field.
5Click the OK button.
6Click the Menu button to close this window.
Changing your Security code
1Click the Security code tab in the main window.
–The Security code window appears with the Characters selection table....

Entering your personal start-up text
1Click the Personal star t-up text tab in the main window.
–The Personal star t-up text window appears, followed by the Characters Selection table.
2Enter your star t-up text directly in the text field with a maximum of 4 lines of 25 characters
each. E.g.This projector belongs to...
Use Cursor Control to select characters in the selection table.
3Click the OK button.
4. Click the Menu button to close this window.
–Your own Personal star t-up screen will now be...

3Click the OK button.
–The shutdown timer value has been changed.
4Click the Menu button to close this window.
The end user is responsible for the consequences of setting the Shutdown timer.
–When less than 10 operating hours are left, the Shutdown warning screen will be projected
each time the projector is turned on. This gives you the oppor tunity to increase the number
of operating hours (see above) before the projector will be shut down and cannot be used
any longer.
When ignoring this warning all...

Update the shutdown timer
1Make sure the projector is properly connected (see the user manual on the manual CD-ROM).
2Turn on the projector.
–The Locked warning screen will be projected.
3Click the Menu button.
–The Security code quer y window appears.
4Enter your security code.
5Click the OK button.
–The projector is now unlocked.
You may follow the same procedure as described in Setting the Shutdown timer to set the Shutdown
timer again.
Disable the shutdown timer
See ‘Removing SecurityMax protection’...

Removing SecurityMax protection
1Click the Remove protection tab in the main window.
–The Remove protection window appears.
2Select the item you want to disable by using the Cursor Control up/down.
3Select Yes/No by using the Cursor Control left/right.
4Click the OK button.
5Click the Menu button to close this window.
Exit SecurityMax
1Exit SecurityMax by pressing the Menu button.
Philips Multimedia Projector30English User guide bCool SV1
5. OperationOn Screen Display Menu<