Philips Bdl5571v User Manual

							User Manual BDL5571V 
 30 
4.1.2. NAVIGATING THE OSD MENU USING THE MONITOR‟S CONTROL BUTTONS 
 
 
 
1. Press the MENU button to display the OSD menu. 
2. Press the / button to choose the item you want to adjust. 
3. Press the SOURCE or PLUS button to enter the submenu. 
4. In the submenu, press the / button to toggle between items, 
or press PLUS/MINUS button to adjust settings. If there is a 
submenu, press the SOURCE or PLUS button to enter the 
submenu. 
5. Press the MENU button to return to the previous menu, or press 
the MENU button several times to exit the OSD menu. 
 
 
 
						

							User Manual BDL5571V 
 31 
4.2. OSD Menu Overview 
 
4.2.1. PICTURE MENU 
 
 
 
 
Brightness 
Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Contrast 
Adjust to sharpen the picture quality. The black portions of the picture become richer in darkness and the 
white become brighter. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Sharpness 
Adjust to improve detail. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Black level 
Adjust to change the image brightness. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Noise reduction 
Adjust to remove the noise in the image. You can select a suitable noise reduction level. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 Off  Low 
 Middle  High 
 
						

							User Manual BDL5571V 
 32 
Tint 
Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and YPbPr inputs only. 
Adjust to change the color tint of the image. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
Press the PLUS button and the tone color becomes greenish. Press the MINUS button and the tone 
color becomes purplish. 
 
Color 
Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and YPbPr inputs only. 
Adjusts to increase or decrease the intensity of colors in the image. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
Press the PLUS button to increase color intensity, or press the MINUS button to decrease color intensity. 
 
Color temperature 
Select a color temperature for the image. The image looks reddish with a lower color temperature, and 
looks bluish with a higher color temperature. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 5000K  6500K 
 7500K  9300K 
 10000K  Native 
 User 
 
Color control 
Note: This function is only available when Color temperature is set to User. 
With this function you can adjust the color tones of the image precisely by changing the R (Red), G 
(Green) and B (Blue) settings independently. 
Press the SET/PLUS button to open the submenu. Press the UP/DOWN button to select User-R, User-G 
or User-B, and press the PLUS/MINUS button to adjust. 
 
Light sensor 
Choose to enable or disable the ambient light sensor. Once enabled, the image brightness will be 
adjusted automatically when ambient lighting condition changes. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make 
selection. 
 
Smart contrast 
When turned on, this function helps enhance image contrast when displaying dark scenes. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make 
selection. 
 
 
						

							User Manual BDL5571V 
 33 
 
 
 
Smart picture 
The following smart picture modes are available for  
PC mode: Standard, Highbright and sRGB. 
Video mode: Standard, Highbright and Cinema. 
 
Video source 
Select a video input source. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 Display Port  DVI-D 
 Card DVI-D  VGA 
 HDMI  YPbP(Componment) 
 
Picture reset 
Reset all settings in the Picture menu. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make 
selection. Select Reset and press the SET button to restore settings to factory preset values. Press the 
EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. 
 
 
						

							User Manual BDL5571V 
 34 
4.2.2. SCREEN MENU 
 
 
 
 
H position 
Adjust the horizontal placement of the picture. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
Press the PLUS button to move the image to the right, or press the MINUS button to move the image to 
the left. 
 
V position 
Adjust the vertical placement of the picture. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
Press the PLUS button to move the image up, or press the MINUS button to move the image down. 
 
Clock 
Note: For the VGA input only. 
Adjust the width of the image. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
Press the PLUS button to expand the width of the image, or press the MINUS button to shrink the width 
of the image. 
 
Clock phase 
Note: For the VGA input only. 
Adjust to improve the focus, clarity and stability of the image. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Zoom mode 
The pictures you receive may be transmitted in 16:9 format (widescreen) or 4:3 format (conventional 
screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox 
format). 
This function allows you to optimize the picture display on screen. The following zoom modes are 
available for  
PC mode: Full, Normal, Custom, Real and 21:9. 
Video mode: Full, Normal, Dynamic, Custom, Real and 21:9. 
 
 
						

							User Manual BDL5571V 
 35 
 
 Full - This mode restores the correct proportions of pictures transmitted in 16:9 using 
the full screen display.  
 
 Normal - The picture is reproduced in 4:3 format and a black band is displayed on 
either side of the picture. 
 
 
 
 
 
 Dynamic - Fill the entire screen by stretching 4:3 pictures non-proportionally. 
 
 Custom - Choose to apply the custom zoom settings in the Custom Zoom 
submenu. 
 Real - This mode displays the image pixel-by-pixel on screen without scaling the 
original image size. 
 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when 
displaying pictures that have black bands at the top and bottom (letterbox format). 
 
Custom zoom 
Note: This item is only available when the Zoom mode setting is set to Custom. 
You can use this function to further customize the zoom settings to suit the image you want to display. 
Press the SET/PLUS button to open the submenu. Use the UP/DOWN button to toggle between the 
following items, and use the PLUS/MINUS button to adjust. 
 
 
 Zoom - Expands the horizontal and vertical sizes of the image simultaneously. 
 H zoom - Expands the horizontal size of the image only. 
 V zoom - Expands the vertical size of the image only. 
 H position - Moves the horizontal position of the image left or right. 
 V position - Moves the vertical position of the image up or down. 
 
Screen reset 
Reset all settings in the Screen menu. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make 
selection. Select Reset and press the SET button to restore settings to factory preset values. Press the 
EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. 
 
						

							User Manual BDL5571V 
 36 
4.2.3. AUDIO MENU 
 
 
 
 
Balance 
Adjust to emphasize left or right audio output balance. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Treble 
Adjust to increase or decrease higher-pitched sounds. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Bass 
Adjust to increase or decrease lower-pitched sounds. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Speaker 
Set the monitor to play audio using the built-in (internal) speaker or external speakers. 
Use the UP/DOWN button to toggle between 
 Internal  External 
 
Volume 
Adjust to increase or decrease the audio output level. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. 
 
Mute 
To turn the mute function on/off. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make 
selection. 
 
 
						

							User Manual BDL5571V 
 37 
Audio source 
To select the audio input source according to the audio signal source connected to the audio input and 
HDMI sockets on the monitor. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 HDMI  AUDIO1 
 AUDIO2  AUDIO3 
 
Audio reset 
Reset all settings in the AUDIO menu. 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make 
selection. Select Reset and press the SET button to restore settings to factory preset values. Press the 
EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. 
 
 
						

							User Manual BDL5571V 
 38 
4.2.4. PIP MENU 
 
 
 
 
PIP 
Turn PIP (Picture-in-Picture) mode On/Off. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between  
 On  Off 
 
PIP input 
Select the input signal for the sub-picture. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make 
selection. 
 
PIP change 
Exchange between the main picture and sub picture. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make 
selection. 
 
PIP size 
Select the size of the sub picture in the PIP (Picture-in-Picture) mode. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 Small  Medium 
 Large 
 
PIP audio 
Select the audio source in the PIP (Picture-in-Picture) mode. 
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle 
between 
 MAIN - Select audio from the main picture 
 Sub - Select audio from the sub picture. 
 
PIP reset 
Reset all settings in the PIP menu. 
 
						

							User Manual BDL5571V 
 39 
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make 
selection. Select Reset and press the SET button to restore settings to factory preset values. Press the 
EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. 
 
Notes: 
 The PIP function is only available under certain signal source combinations as shown in the table below. 
 Main picture signal source 
DP HDMI DVI-D Card 
DVI-D VGA YPbPr 
Sub picture 
signal 
source 
DP ╳ ○ ○ ○ ╳ ╳ 
HDMI ○ ╳ ╳ ╳ ○ ○ 
DVI-D ○ ╳ ╳ ╳ ○ ○ 
Card DVI-D ○ ╳ ╳ ╳ ○ ○ 
VGA ╳ ○ ○ ○ ╳ ╳ 
YPbPr ╳ ○ ○ ○ ╳ ╳ 
(○: PIP function available, ╳: PIP function unavailable) 
 The availability of the PIP function will also depend on the resolution of the input signal being used.