Home > Philips > Projector > Philips Cbright LC4331 Projector User Manual

Philips Cbright LC4331 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips Cbright LC4331 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Philips Multimedia projectorcBright Series
    LC4345, LC4341, LC4331
    User guideEnglish
    M e
    n uO K
    A
    V
    M u
    t
    eK
    eyst
    o
    neV
    olu
    m
    eSt
    a n
    d
    b yL
    am
    pRC
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 1 
    						
    							2
    MenuOK
    AV
    MuteK
    e
    y
    s
    t
    o
    n
    eVolumeS
    t
    a
    n
    d
    b
    yLampR
    C
    Menu OK
    AV
    Mute
    Keystone Source
    Stand by
    OnLamp
    RC Menu OK
    AV
    Mute
    Keystone Source
    Stand by
    OnLamp
    RC
    @
    0
    @
    # !
    $
    2
    5 1
    63
    8 7
    9
    4
    hk
    Audio out USB L  Audio in  R Video S-Video Data in Data out Audio out USB R  Audio in  L Video S-Video Data out Data in
    ac
    j
    i
    bdefgb
    fig. 1
    fig. 4
    0. Controls and connections
    VOLUME
    OK MENU
    MUTE
    D-ZOOM D-FREEZE SOURCEMOUSERight Left
    Vo l u m e
    OK MenuStand by
    On
     Mute
    D-Zoom D-Freeze SourceMouseRight Left2
    3 1
    9
    6
    5
    4
    0
    !
    7
    8AV MUTE AV MUTEAV Mute
    Menu
    Volume
    Stand by
    OnAV
    Mute
    D-Zoom
    D-Freeze Source
    Menu
    Volume
    Stand by
    OnAV
    Mute
    D-Zoom
    D-Freeze Source
    OK
    OK
    32 1
    9 !
    50
    6
    7
    8
    4
    fig. 2 fig. 3 LC4341/4331 LC4345
    Available as accessory
    for LC4341/4331
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 2 
    						
    							Table of contents
    0. Controls and connections .....................................................2
    1. Introduction............................................................................3
    Table of contents .....................................................................3
    Introduction .............................................................................3
    Packaging contents .................................................................3
    2. Things You Should Know  ....................................................3
    3. Important Safeguards ...........................................................4
    4. Projector Features .................................................................5
    5. Functional Overview ..........................................................6-7
    Controls ...................................................................................6
    Connections .............................................................................7
    6. Set Up..................................................................................8-9
    Positioning the projector and screen .......................................8
    Mains supply ...........................................................................8
    Adjusting the focus and size of the image ..............................8
    Adjusting the vertical and horizontal angle of the projector ....8
    Moving the projector ...............................................................9
    Inserting the batteries in the compact remote control ...........9
    Inserting the batteries in the trackball remote control ............9
    7. Installation ..................................................................... 10-14
    Video/computer cables and adapter ......................................10
    Connecting to a computer .....................................................11
    Connecting to video equipment ............................................12
    Connecting to audio equipment ............................................13
    Connecting to an external monitor ........................................14
    8. Operation ....................................................................... 15-19
    Preparation .......................................................................15-16
    Display and Picture control ...............................................16-18
    Audio control .........................................................................18
    Other settings........................................................................19
    9. Maintenance .................................................................. 20-22
    Cleaning .................................................................................20
    Cleaning the dustfilter ...........................................................20
    Maintenance of the trackball remote control ........................20
    Lamp ......................................................................................21
    Lamp replacement.................................................................21
    Resetting the lamplife time ...................................................22
    10. Troubleshooting...................................................................23
    Introduction
    Congratulations on your purchase of one of the most
    sophisticated and reliable products on the market today. We are
    sure that, used properly, it will bring you years of enjoyment. You
    will want to keep this manual handy, as it is a convenient source
    of information about your projector. For your own protection and
    prolonged operation of your projector, please read the ‘Important
    Safeguards’ section before use. 
    Packaging contents
    Please confirm that the following items are packed in the
    projector box. They are provided to help you use or set up your
    projector.
    – Projector
    – Mains lead
    – Audio/Video RCA Cable
    – Scart/RCA Audio Video adapter (not for USA version)
    – Remote control + batteries
    – Soft bag
    – Integrated VGA/USB cable
    – User Guide, Projection Assistant and more on CD-ROM
    – Quick set up Card
    Note: This equipment has been tested to comply with the limits
    for a class A digital device in accordance with Part 15 of
    the FCC Rules as well as the European CE marking.
    Operation is subject to the following two conditions:
    1. This device may not cause harmful interference, and
    2. This device must accept any interference received, including
    interference that may cause undesired operation.
    These limits are designed to provide reasonable protection
    against harmful interference when the equipment is operated in
    a commercial environment.
    This equipment generates, uses, and can radiate radio frequency
    energy and, if not installed and used in accordance with the
    user’s guide, may cause harmful interference to radio
    communications.
    Operation of this equipment in a residential area is likely to
    cause harmful interference in which case the user will be
    required to correct the interference at his own expense.
    If this equipment does cause harmful interference to radio or
    television reception, which can be determined by turning the
    equipment off and on, the user is encouraged to try to correct
    the interference by one or more of the following measures:
    – Reorientate or relocate the receiving antenna.
    – Increase the distance between the equipment and receiver.
    – Connect the equipment into an outlet on a circuit different
    from that to which the receiver is connected.
    – Consult the dealer or an experienced radio/TV technician for
    help.
    FCC Warning: 
    To assure continued compliance, use only the provided grounded
    power supply cord and shielded interface cables when
    connecting this device to a computer. Also, any unauthorized
    changes or modifications to this equipment could void the user’s
    authority to operate this device.
    Note: Save energy! Please put the projector in the STANDBY
    position if you are not going to use the projector for more
    than 15 minutes.
    Important note for users in the U.S.A.
    The responsible party of this multi media projector is the
    following:
    Philips Consumer Electronics Company
    One Philips Drive
    Knoxville, TN 37914
    Telephone (1888) 873-4672
    1. Introduction
    3
    2. Things You Should Know
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 3 
    						
    							Electrical energy can perform many useful functions. 
    This projector has been engineered and manufactured to meet
    applicable safety standards. IMPROPER USE CAN RESULT IN
    POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order
    not to defeat the safeguards incorporated into this projector,
    observe the following basic rules for its installation, use and
    servicing.
    1.Unplug the projector from the wall outlet before cleaning or
    lamp replacement.
    2.Do not use liquid cleaners or aerosol cleaners. Use a soft dry
    cloth to clean the projector unit. If the unit is very dirty, wet a
    cloth with neutral detergent, squeeze it tight, wipe the unit
    with it, and finish by wiping with a dry cloth. 
    Do not use a chemical duster or polisher-cleaner because it
    can adversely affect the unit and peel the paint.
    3.Do not use attachments not recommended by PHILIPS, as
    they may cause hazards.
    4.Do not use the projector near water- for example, near a
    bathtub, washbowl, kitchen sink, or laundry tub, in a wet
    basement, near a swimming pool, etc. Never spill liquid into
    the projector.
    5.Do not place the projector on an unstable cart, stand, or
    table. The projector may fall, which may cause serious injury
    to a child or an adult and/or serious damage to the unit. Use
    only with a cart or stand recommended by its manufacturer
    as being suitable for use with a projector.
    6.Ceiling, wall or shelf mounting should be done with a
    mounting kit approved by the manufacturer for use with a
    projector and should follow the manufacturer’s instructions.
    7.Projector equipment and cart combinations should be moved
    with care. Quick stops, excessive force, and uneven surfaces
    may cause the equipment and cart combination to overturn.
    8.Slots and openings of the cabinet are provided for ventilation.
    To ensure reliable operation of the projector and to protect it
    from overheating, these openings must not be blocked or
    covered. These openings should never be covered with cloth
    or other material. The bottom opening should not be blocked
    by placing the projector on a bed, sofa, rug, or other similar
    surface. The projector should not be placed near or over a
    radiator or heating vent. The projector should not be placed in
    a built-in installation such as a bookcase unless proper
    ventilation is provided.
    9.The projector should be operated only from the type of
    power source indicated on the side of the projector or in the
    specifications and with the appropriate mains lead. If you are
    not sure of the type of power supplied to your business or
    the right type of mains lead, consult your projector dealer or
    local power company.
    10.Do not allow anything to rest on the power cord. Do not
    place the projector where the cord will be walked on.
    11.Follow all warnings and instructions marked on the projector.
    12.As a safety feature, this projector is equipped with mains
    lead with a 3-pin grounded plug (for USA-versions only) or a
    2-pin grounded plug (for European versions only). The 3-pin/2-
    pin grounded plug will fit only into a grounding type power
    outlet. If the plug does not fit, use an adapter that is properly
    grounded or have an electrician install a grounded type
    outlet. Do not attempt to modify this AC plug.
    13.For added protection of the projector during a lightning
    storm, or when it is left unattended or not in use for long
    periods of time, unplug it from the wall outlet and disconnect
    any cable systems. This will prevent damage to the projector
    due to lightning and power-line surges.14.Do not overload wall outlets and extension cords with too
    many products, because this can cause a fire or electric
    shock.
    15.Never push objects of any kind into the projector through
    cabinet slots as they may touch dangerous voltage points or
    short cut parts, which could result in a fire or electric shock.
    16.Do not attempt to service the projector yourself other than
    maintenance issues presented in chapter ‘Maintenance’.
    Opening or removing covers may expose you to dangerous
    voltage or other hazards. Refer all servicing to qualified
    service personnel.
    17.Unplug the projector from the wall outlet and refer servicing
    to qualified service personnel under the following conditions:
    A.When the power cord or plug is damaged or frayed.
    B.If liquid has been spilled into the projector.
    C.If the projector has been exposed to rain or water.
    D.If the projector does not operate normally when you
    follow the operating instructions. Adjust only those 
    controls that are covered by the operating instructions;
    improper adjustment of other controls may cause
    damage and will often require extensive work by a
    qualified technician to restore the projector to normal
    operation.
    E.If the projector has been dropped or the cabinet has
    been damaged.
    F.When the projector exhibits a distinct change in
    performance – (this indicates a need for service).
    18.Upon completion of any service or repairs to the projector,
    ask the service technician to perform a routine safety check
    to check that the projector is in safe operating condition.
    19.When replacement parts are required, be sure the service
    technician has used replacement parts specified by the
    manufacturer that have the same characteristics as the
    original parts. Unauthorized substitutions may result in fire,
    electric shock, or other hazards.
    20.It is recommended to clean the air filter after every 100 lamp
    hours. The projector may become too hot if the filter is not
    cleaned when required.
    21.If the lens becomes dirty or smudged, clean it with a clean,
    dampened cloth. Never touch the lens with your fingers.
    22.Do not look directly into the aperture and lens while
    operating the projector as this may damage your eyes.
    SCAUTION: Please read all of these instructions
    before you operate your projector.
    Save these instructions for future
    reference.
    3. Important Safeguards
    4
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 4 
    						
    							1. Keystone Correction
    A keystoned image (picture top width larger than picture
    bottom width or vice versa) appears when the relative
    positions of the projector and the screen are not correct.
    With the ‘keystone correction’ feature you can correct this
    picture distortion. Digital keystone correction is directly
    accessible via the keyboard on the projector or via the
    ‘Display’ submenu of the On Screen Display menu.
    2. Auto Image
    The ‘Auto Image’ feature automatically sizes and positions
    the image, to optimally fit the screen picture. It is applicable
    for data input only and accessible in the ‘Display’ submenu of
    the On Screen Display menu. Manual settings of Horizontal
    Size, Shift and Phase remain possible by switching Auto
    Image off. The projector is fully PC and MAC compatible.
    3. USB
    The USB (Universal Serial Bus) connector allows you to
    connect to computers equipped with a USB interface,
    resulting in real hot plug and play presentation. By
    connecting USB, the mouse function on the Remote Control
    automatically gets installed.
    4. Digital features
    The digital features of the projector are of great value for an
    attractive presentation. With ‘digital zoom’ a specific part of
    the projected image can be enlarged. The ‘digital freeze’
    feature enables you to capture moving pictures (still picture).
    5. Very easy to install and operate
    The OSD (On Screen Display) information screens and
    menus in 6 languages provide you with additional information
    to help you make the right choices about installation and
    operation, and to perform the correct actions.
    The standard OSD language is English. In addition you can
    select French, Spanish, German, Italian and Portuguese.
    The sensor of the wireless remote control allows you to
    operate both your computer as well as your projector from
    almost anywhere in the room. The directional shuttleon
    the projector and on the compact remote controlfunction
    as Cursor Controland are used to manipulate the mouse
    cursor on the connected computer, as long as the menu is
    not active. On the trackball remote control(standard with
    models LC4345 and available as accessory for the other
    models) the trackballis used to manipulate the mouse
    cursor. When the menu is active, the Cursor Control controls
    the menu cursor.
    The local keyboard provides direct access buttons for those
    functions that are most often used during set-up of the
    projector. The remote control provides buttons for those
    functions that are most often used during presentations. For
    a complete overview of keyboard and remote control
    buttons, see the Functional Overview in the next paragraph.
    6. External monitor connection
    A separate external monitor (or a second projector) can be
    connected to the projector, The image projected is
    simultaneously shown on the monitor.
    7. High reliability and excellent brightness
    The Philips UHP lamp guarantees long life, excellent
    brightness over the lamp’s lifetime and excellent colour
    reproduction.
    Furthermore, the projector has an excellent brightness- and
    colour uniformity over the entire picture.8. Excellent video quality
    The projector accepts the input signal of all major video
    formats, including PAL, SECAM, NTSC and S-Video signals.
    The projector will recognize these standards and adapt to
    them automatically. With the ‘picture format’ feature you can
    select one of three picture format options 4:3, 16:9 or 16:9
    enlarged.
    9. Stereo Audio Output 
    Line output for connecting external audio equipment via
    standard 3.5 mm stereo jack.
    10. Adjustable Screen Capability
    The diagonal picture size of the display can be set from 
    21 (0.53 m) to 262 (6.6 m).
    11. Ceiling Mount and Rear Screen projection
    The projector is equipped with a full mirror scan conversion
    function (‘vertical/horizontal mirror’), which allows the image
    to be reversed for ceiling mount as well as for rear projection
    applications.
    4. Projector Features
    5
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 5 
    						
    							Controls
    On projector (fig. 1)
    1Menu
    To activate and deactivate the menu.
    2Cursor Control
    To manipulate the mouse cursor on the connected computer
    as long as the menu is not active. When the menu is active
    the Cursor Control controls the menu cursor. The cursor
    control works with up/down and left/right button operation.
    Notes:
    – The Cursor Control can only function as a mouse cursor
    when the USB socket of the projector is connected to the
    USB downstream terminal of the computer.
    – When the Digital Zoom is active, the Cursor Control gives
    direct access to the Panning function to select the enlarged
    area.
    3A(udio)/V(ideo)-Mute
    To mute the sound of the projector (or an externally
    connected sound amplifier) and to mute the picture.
    4Standby On
    To switch the projector in or out of the power standby mode.
    When the projector is in standby mode, the ring around the
    button lights up red. When the projector is operating, the ring
    is white.
    5OK
    To confirm actions in the menu when the menu is on screen.
    6Source
    To select the current projection source (Data, S-Video or
    Video). The button toggles between the three signals.
    7Keystone 
    To correct picture distortion of the vertical keystone type by
    digital scaling.
    8Lamp indicator
    – Slowly flashes green when the lamp is starting up
    – Lights up green when the lamp is on
    – Slowly flashes orange when the lamp is starting up and
    lamp life expires within the next 100 hours or has expired
    – Lights up orange when the lamp is on and lamp life expires
    within the next 100 hours or has expired
    – Lights up red when the lamp start has failed
    9R(emote)C(ontrol)indicator
    Flashes green when the remote control is operated and the
    projector responds.
    0Zoomring
    To adjust the size of the projected image.
    !Focus ring
    To adjust the focus of the projected image.
    @Height/Level adjusters
    To adjust the vertical and/or horizontal angle of the projector.
    #Lens cap
    To protect the lens when the projector is not in use.
    $IR sensor
    To receive the signals from the remote control.
    On compact remote control (LC4341/4331) - (fig. 2)
    1Stand by On
    To switch the projector in or out the the power standby
    mode.
    2Mouse Left/Right
    Function as the Left and Right mouse buttons of your PC.
    3– Volume +
    To adjust the volume.
    4Menu
    To activate and de-activating the menu.
    5Mute
    To mute the sound of the projector (or an externally
    connected sound amplifier).
    6Source
    To select the current projection source (Data, S-Video or
    Video). The button toggles between the three signals.
    7D(igital)-Freeze
    To capture a moving picture. The button toggles between the
    Freeze mode and the display situation.
    8D(igital)-Zoom
    To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle
    button). In ‘On’ condition, the image is magnified with the
    zoom factor chosen under Magnification in the menu and the
    Cursor Control can be used to select the enlarged area
    (Panning).
    9A(udio)/V(ideo)Mute
    To mute the sound of the projector (or an externally
    connected sound amplifier) and to mute the picture.
    0Cursor Control
    To manipulate the mouse cursor on the connected computer
    as long as the menu is not active. When the menu is active
    the Cursor Control controls the menu cursor. The cursor
    control works with up/down and left/right button operation.
    Notes:
    – The Cursor Control can only function as a mouse cursor
    when the USB socket of the projector is connected to the
    USB downstream terminal of the computer.
    – When the Digital Zoom is active, the Cursor Control gives
    direct access to the Panning function to select the enlarged
    area.
    !OK 
    To confirm actions in the menu when the menu is on screen.
    5. Functional Overview
    6
    See illustrations
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 6 
    						
    							On trackball remote control (LC4345) - (fig. 3)
    1On/off button
    To switch the remote control on and off.
    Note: The remote control will always use some power, even
    when not in use. Therefore it is advised to always
    switch off the remote control after use.
    2Cursor Control
    To manipulate the mouse cursor on the connected computer
    as long as the menu is not active. When the menu is active
    the Cursor Control controls the menu cursor.
    Notes:
    – The Cursor Control can only function as a mouse cursor
    when the USB socket of the projector is connected to the
    USB downstream terminal of the computer.
    – When the Digital Zoom is active, the Cursor Control gives
    direct access to the Panning function to select the enlarged
    area.
    3OK
    To confirm actions in the menu when the menu is on screen.
    When the menu is not on screen the – / – – buttons
    function as the Left and Right mouse buttons of your PC.
    4Menu
    To activate and deactivate the menu.
    5Stand by On
    To switch the projector in or out the the power standby
    mode.
    6– Volume +
    To adjust the volume.
    7Source
    To select the current projection source (Data, S-Video or
    Video). The button toggles between the three signals.
    8D(igital)-Freeze
    To capture a moving picture. The button toggles between the
    ‘Freeze’ mode and the normal display situation.
    9D(igital)-Zoom
    To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle
    button). In ‘On’ condition, the image is magnified with the
    zoom factor chosen under Magnification in the menu and the
    Cursor Control can be used to select the enlarged area
    (Panning).
    0A(udio)/V(ideo)Mute
    To mute the sound of the projector (or an externally
    connected sound amplifier) and to mute the picture.
    !Back-light button
    To switch on the button illumination.
    The back-light will automatically switch off after 5 seconds.
    Connections (fig. 4)
    Data source connections
    a Audio out
    Output socket to connect to the Line Input sockets of an
    amplifier or stereo system.
    b USB
    (upstream)
    Input socket to connect a PC or Apple Macintosh computer
    equipped with a USB downlink connection.
    g Data in
    Input socket to connect to the Data out terminal of a
    computer.
    Video source connections
    a Audio out
    Output socket to connect to the Line Input sockets of an
    amplifier or stereo system.
    c Audio in L/R
    Input sockets to connect to the Audio out sockets of a video
    recorder (S-VHS, PAL, NTSC, SECAM).
    d Video
    Input socket to connect to the Video out socket of a video
    recorder, Laser Disc player, video camera or TV with AV
    output socket (PAL, NTSC, SECAM).
    e S-Video
    Input socket to connect to the S-Video out socket of a S-VHS
    video recorder, a VCR, Laser Disc player, video camera or TV
    with AV output socket.
    Other connections
    f Data out
    To connect to an external monitor (or a second projector).
    The image projected is simultaneously shown on the
    monitor.
    h Lamp compartment
    i Lock slit
    To insert an optional locking device (Kensington lock).
    j Power
    To connect the projector to the mains.
    k Dust filter
    5. Functional Overview
    7
    See illustrations
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 7 
    						
    							Positioning the projector and screen
    • Place the projector on a stable, level surface, out of direct
    sunlight and away from sources of excessive dust, dirt, heat,
    water, moisture, vibration and strong magnetic fields.
    Face the projector towards the screen for the best picture
    results. To determine the distance for the desired size,
    please refer to the Projection Assistant, a calculation
    programme included on the CD-ROM.
    • The screen should be positioned so that it is not directly
    touched by sunlight or artificial light, as this will wash out the
    colours of the picture, making it hard to see.
    • The projector can be used for both front projection, rear
    projection and ceiling projection applications. As default
    factory setting, the projector has been set up for front
    projection. You can change to rear or ceiling projection via the
    OSD menu. See ‘Rear screen projection’ and ‘Ceiling-mount
    projection’ under ‘Operation - Display and picture control’ for
    further instructions.
    • Choose a screen size suitable for the number of viewers and
    the size of the room.
    • Picture quality is best when you sit directly in front of the
    projector screen.
    Mains supply
    1.Insert the mains lead into the projectors Power socket and
    connect it to the wall socket.
    Note: The standby indicator lights up red, the projector is now in
    the Power/Standby mode.
    2.Remove the lens cap.
    3.Press the Stand by
    On button to switch on
    the projector.
    – The lamp indicator
    flashes green.
    – When the projection
    lamp is on, the lamp
    indicator lights up green
    while the lamp is
    starting up and the start-
    up screen appears for
    several seconds.
    4.Press the Stand by On
    button again to switch
    the projector back into
    the power standby
    mode.
    – The Standby Warning
    screen will appear for
    20 seconds.
    Note:The Stand by Warning screen can be removed by keeping
    the Stand by On button pressed for 3 seconds.
    If the Stand by On button is pressed for 3 seconds the
    first time (step 3), the projector is switched back into the
    power standby mode without the Standby Warning screen
    being displayed.
    5.To switch off the mains supply completely, pull the mains
    plug out of the wall socket.
    Note: Before disconnecting the mains lead, make sure that the
    cooling fan has stopped (about 3 minutes after the
    projector has been switched to Power Standby).
    Adjusting the focus and size of the image
    • Use the Zoom ring to adjust the size of the image.
    • Use the Focus ring to adjust the focus of the image.
    Adjusting the vertical and horizontal angle of the projector
    Vertical angle
    • Use the Height/Level Adjusters to adjust the vertical angle of
    the projector as specified under ‘Positioning the projector and
    screen’.
    To Raise:
    • Keep both adjusters (A) pressed and lift to raise the projector.
    – The projector feet (B) will come out.
    AA
    B
    B
    MenuO
    K
    A
    V
    M
    u
    t
    eKeystoneV
    o
    l
    u
    m
    eStand
    byL
    a
    m
    pRC
    Focus ring
    Zoom ring
    
    Warning
    
    
    If the projector is switched off you have to wait
    1 minute before you can switch on the projector 
    again.
    
    
    
    
    
    
    
    
    
    
    To switch off projector keep stand-by key pressed
    for 3 seconds.
    Press OK key to remove this warning.
    PHILIPS PHILIPS
    PHILIPS
    Multimedia Projectors
    Multimedia Projectors
    M
    e
    n
    uO
    K
    AV
    MuteKeystoneV
    o
    l
    u
    m
    eS
    t
    a
    n
    d
    b
    yL
    a
    m
    pR
    C
    6. Set Up
    8
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 8 
    						
    							To Lower:
    • Keep both adjusters (A) pressed and gently lower the
    projector.
    • Use the Focus Ring and Zoom Ring to readjust the focus and
    size of the image.
    Horizontal angle (horizon)
    • Adjust or correct a possible tilted picture by turning the
    projector feet to the desired position.
    Up: turn the feet to the left.
    Down: turn the feet to the right.
    • Use the Focus Ring and Zoom Ring to readjust the focus and
    size of the image.
    Keystone correction
    If projector and screen are not properly placed, the picture will
    be distorted, producing a keystone image. 
    Keystone correction allows you to correct
    picture distortion of the vertical keystone type
    by internal scaling.
    • Use the Keystone  button to widen the image.
    • Use the Keystone button to narrow the image.
    • This correction function also is accessible through the
    ‘Keystone Correction’ option in the ‘Display’ submenu of the
    On Screen Display (OSD) menu. For details see the
    explanation in ‘Display and Picture Control’.
    Moving the projector
    1.Press the Stand by On button to put the projector in stand
    by. The standby indicator lights up red.
    2.Wait until the cooling fan has stopped (about 3 minutes after
    the projector has been switched off) and disconnect the
    mains lead and all other cables.
    3.Make sure the lens is turned back in to prevent damage to
    the lens.
    4.Put the lens cap back in place to prevent dust, dirt or other
    contamination from harming or damaging the front of the
    projector lens when moving the projector.
    Note: Never place the projector on the side where the
    connections are located.Inserting the batteries in the compact remote control
    (LC4341/4331)
    1.Push and slide the lid in the direction of the arrow.
    2.Install two ‘AAA’ batteries as indicated inside the battery
    compartment.
    3.Replace the lid and snap it into place.
    Note: The maximum range of the remote control is
    approximately 15 m (± 50 feet).
    Inserting the batteries in the trackball remote control
    (LC4345)
    1.Push and slide the lid in the direction of the arrow.
    2.Install three ‘AA’ batteries as indicated inside the battery
    compartment.
    3.Replace the lid and snap it into place.
    Caution!
    Do not mix old and new batteries (also never mix alkaline and
    manganese batteries).
    Note: The maximum range of the remote control is
    approximately 20 m (± 65 feet).
    Push
    Push
    M
    e
    n
    uO
    K
    AV
    MuteKeystoneV
    o
    l
    u
    m
    eS
    t
    a
    n
    d
    b
    yL
    a
    m
    pR
    C
    Keystoned Image
    6. Set Up
    9
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 9 
    						
    							Video/computer cables and adapter
    These accessories (1 to 3) are supplied with the product for
    connecting the projector to computer/AV equipment. 
    The numbers in the left-hand column correspond with the
    numbers in the connection diagrams on the following pages.
    When connecting the projector to a Macintosh computer, a
    programmable VGA/MAC adapter is available as an optional
    Philips cable accessory.
    7. Installation
    10
    No.CONNECTIONS
    Computer/AV products side Projector side
    Integrated VGA/USB CableCABLE/ADAPTER
    Mini D-Sub 
    15P (male)
    RCA pin
    (male) x 3Mini D-Sub 
    15P (male)RCA pin
    (male) x 3
    3RCA Audio Video Cable 1
    2
    Scart/RCA-AV Adapter
    USB connector
    4P (female) USB connector
    4P (female)
    (depending on region)
    Video/computer cables and adapter
    XP Hopper SV30 Eng.*  05-09-2000 11:56  Pagina 10 
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips Cbright LC4331 Projector User Manual