Philips Cbright LC4345 Projector User Manual

Connecting to a computer
Caution!
– The data input is suitable for both Apple Macintosh
computers (Power Book and Power Mac) as well as for 
IBM compatible PCs.
– The data output of IBM compatible PCs can be connected
directly to the projector using standard data cables.
– Apple Macintosh computers may need a conversion plug
(optional) added to the standard data cable.
– The figures in brackets (1) correspond to the figures in the
accessories diagram. 
The characters in brackets (a) correspond to the...

Connecting to video equipment
Note: The figures in brackets (1) correspond to the figures in the
accessories diagram.
The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’. 
Caution!
Always switch off the projector before making any connections.
PAL, NTSC, SECAM
1.Connect the Video out socket of a VCR, Laser Disc player,
video camera or TV to the Video socket (d) of the projector.
For this, use the video/audio connection cable (2) supplied.
2.Connect the...

Connecting to audio equipment
Note: The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’. 
Caution!
Always switch off the projector before making any connections.
Always turn down the volume control of the connected amplifier
before switching it on, to prevent damage to the speakers.
• Connect the Audio in L/R sockets of an amplifier or stereo
system to the Audio out socket (a) of the projector.
Insert the white plug into the L socket and the red plug into...

Connecting to an external monitor
Note: The characters in brackets (a) correspond to characters in
fig. 4 of ‘Controls and connections’.
Caution! 
Always switch off PC, external monitor and projector before
making any connections.
1.Connect the Data out terminal of the computer to the Data in
terminal (g) of the projector and secure the plugs by
tightening the thumb screws.
For this, use the VGA/USB cable (1) supplied.
When connecting the projector to a Macintosh computer use
the VGA/MAC adaptor...

Preparation
General
1.Press the Stand by On button to switch on the projector.
– The lamp indicator
flashes green and the
start up screen appears
for several seconds.
– When the average
lamplife time has almost
expired and less than 
100 hours remain, the
message ‘Warning:
lamplife has almost
expired’ will be displayed
on the screen when
switching the projector
on. For this refer to the
section ‘Lamp’ under
‘Maintenance’ 
– When the lamp is on, the lamp indicator lights up green.
2.If you use the...

2.Use Cursor Control left
and/or right to move the
cursor to any other item
in the menu bar.
3.Select the sub menu item
to be adjusted using
Cursor Control up and/or
down.
4.Adjust the selected item
in the action window at
the bottom of the screen,
using Cursor Control left
and/or right.
5.Select the next item to
be adjusted in the sub
menu and adjust as
described above.
6.Press Menu to close the
On Screen Display.
Language selection
The projector can display menus in one of six different languages....

Note: A(audio)/V(video)-mute can only be selected with the 
AV mute button on the projector or on the remote control.
A/V mute then appears on the screen. 
For example:
The following adjustments procedures follow a slightly
different sequence of actions, or may need some further
explanation.
Pan
To view an enlarged area of the projected picture the Pan
function is used. Panning is only possible when the picture is
enlarged with Digital Zoom. If the picture is not enlarged, the
panning option is greyed...

Mirror
The projector can be used in various positions with respect to
the viewers and the projection screen. With the Mirror function
the picture can be displayed in a way that is suitable for a
specific application.
Rear screen projection
The image can be flipped to a horizontal mirror image of the
input signal for rear screen projection.
Front projection
Rear projection
Ceiling-mount projection
The projector is equipped with an upside-down scan function
(vertical mirror), which allows the image to be...

Other Settings
The projector is equipped with the following functions to
optimize its use and handling:
Start-up screen
This function allows you to display or suppress the default
Philips start-up screen upon the projector’s start up.
1.Press Menu.
– The menu bar appears on the screen.
2.Use Cursor Control to move the cursor to Settings.
3.Select Start-up screen by using Cursor Control.
4.Select On to use the default setting or Off to suppress the
start-up screen.
5.Press Menu to close the On Screen...

Cleaning
Caution!
Switch off and disconnect the projector before cleaning.
1.When the cabinet is dusty, clean it by gently wiping with a
soft cloth.
2.A chamois leather slightly moistened with water is sufficient
for cleaning the housing.
3.Do not use cleaning agents as they may harm the housing.
Always keep the lens clean
1.When the lens is dirty or dusty, first blow the dust off and
then gently wipe with a soft brush or lens cleaning paper.
Never touch the lens with your fingers.
2.The lens is likely...