Philips Css2113b User Manual

							CSS2113BCSS2113
CSS2115
Register your product and get support at
www.philips.com/welcome
EN User manual 
DA Brugervejledning 
DE Benutzerhandbuch 
EL Εγχειρίδιο χρήσης 
ES Manual del usuario 
FI Käyttöopas 
FR Mode d’emploi 
IT Manuale utente 
NL Gebruiksaanwijzing 
NO Brukerhåndbok 
PT Manual do utilizador 
SV Användarhandbok 
TR Kullanım kılavuzu 
   
						

							1
English
EN
Contents
1 Help and support  2
FAQs 2
Contact Philips 2
2 Notice 2
Compliance 2
Mains fuse 2
Trademarks 2
3 Important 3
Safety 3
Care for your product 3
Care of the environment 3
4 Your SoundBar 4
Main unit 4
Remote control 5
5 Connect your SoundBar  6
Subwoofer 6
Connectors 7
Connect audio from TV and other devices 7
6 Use your SoundBar 9
Play audio from TV or other devices 9
Adjust the volume 9
Choose your sound 9
MP3 player 10
Apply factor y settings 10
7 Wall mount 10
8 Product specifications  11
9 Troubleshooting 12
 
						

							2EN
1 Help and suppo rt
FAQs
If you have a problem, refer to the frequently 
asked questions (FAQs) for this SoundBar at www.
philips.com/suppor t.
If you still need help, contact Philips Consumer 
Care in your countr y.
Warning
 •Do not attempt to repair your SoundBar 
yourself. This may cause severe injur y, irreparable 
damage to your SoundBar, or void your warranty.
Contact Philips
If you contact Philips, you will be asked for the 
model and serial number of your product. The 
model number and serial number are on the back 
or bottom of your product. Note the numbers 
before you call Philips: 
Model No. __________________________
Serial No. ___________________________
2 Notice
This section contains the legal and trademark 
notices.
Compliance
 
This product is in compliance with the essential 
requirements and other relevant provisions of 
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
Mains fuse
This information applies only to products with a 
UK mains plug.
This product is fitted with an approved molded 
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,• a BS 1362 approval, and• the ASTA approval mark.
Contact your dealer if you are not sure about 
what type of fuse to use.
Caution: To conform with the directive 
(2004/108/EC), do not detach the plug from the 
power cord.
Trademarks
  
Manufactured under license from Dolby 
Laboratories. Dolby and the double-D symbol are 
trademarks of Dolby Laboratories.
 
						

							3
English
EN
3 Important
Read and understand all instructions before you 
use your SoundBar. If damage is caused by failure 
to follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!• Never expose the product and accessories to 
rain or water. Never place liquid containers, 
such as vases, near the product. If liquids are 
spilt on or into the product, disconnect it 
from the power outlet immediately. Contact 
Philips Consumer Care to have the product 
checked before use.
• Never place the product and accessories 
near naked flames or other heat sources, 
including direct sunlight.
 •Never inser t objects into the ventilation slots 
or other openings on the product.
 •Where the mains plug or an appliance coupler 
is used as the disconnect device, the disconnect 
device shall remain readily operable.
 •Disconnect the product from the power 
outlet before lightning storms. 
 •When you disconnect the power cord, always 
pull the plug, never the cable.
Risk of short circuit or fire!
 • Before you connect the product to the power 
outlet, ensure that the power voltage matches 
the value printed on the back or bottom of 
the product. Never connect the product to 
the power outlet if the voltage is different.
Risk of injury or damage to the SoundBar!
 • For wall-mountable products, use only the 
supplied wall mount bracket. Secure the 
wall mount to a wall that can suppor t the 
combined weight of the product and the wall 
mount. Koninklijke Philips Electronics N.V. bears 
no responsibility for improper wall mounting 
that results in accident, injur y or damage.
 •Never place the product or any objects on 
power cords or on other electrical equipment.
 •If the product is transpor ted in temperatures 
below 5°C, unpack the product and wait until 
its temperature matches room temperature 
before connecting it to the power outlet.
 •Par ts of this product can be made of glass. 
Handle with care to avoid injur y and damage. Risk of overheating! 
 •
Never install this product in a confined space. 
Always leave a space of at least four inches 
around the product for ventilation. Ensure 
cur tains or other objects never cover the 
ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or carbon 
and alkaine, etc.).
• Danger of explosion if batteries are 
incorrectly replaced. Replace only with the 
same or equivalent type.
• Remove batteries if they are exhausted or if 
the remote control is not to be used for a 
long time.
• Batteries contain chemical substances, they 
should be disposed of properly. 
Risk of swallowing batteries!
• The product/remote control may or may 
not contain a coin/button type batter y, which 
can be swallowed. Keep the batter y out of 
reach of children at all times! If swallowed, 
the batter y can cause serious injur y or death. 
Severe internal burns can occur within two 
hours of ingestion.
• If the batter y has been swallowed, seek 
immediate medical attention.
• When you change the batteries, always 
keep all new and used batteries out of 
reach of children. Ensure that the batter y 
compar tment is completely secure after you 
replace the batter y.
• If the batter y compar tment cannot be 
completely secured, discontinue use of the 
product. Keep out of reach of children and 
contact the manufacturer.
 
						

							4EN
Care for your product
 Use only microfiber cloth to clean the product.
Care of the environment
  
Your product is designed and manufactured with 
high quality materials and components, which can 
be recycled and reused.
 
When this crossed-out wheeled bin symbol is 
attached to a product it means that the product 
is covered by the European Directive 2002/96/
EC . Please inform yourself about the local separate 
collection system for electrical and electronic products.
Please act according to your local rules and do not 
dispose of your old products with your normal 
household waste.
Correct disposal of your old product helps to 
prevent potential negative consequences for the 
environment and human health.
  
Your product contains batteries covered by the 
European Directive 2006/66/EC, which cannot be 
disposed with normal household waste.
Please inform yourself about the local rules on 
separate collection of batteries because correct 
disposal helps to prevent negative consequences 
for the environmental and human health.
4 Your SoundBar
Congratulations on your purchase, and welcome 
to Philips! To fully benefit from the suppor t that 
Philips offers, register your SoundBar at   
www.philips.com/welcome.
Main unit
 
a SURR indicator
Lights up when surround mode is turned on.
b Source indicators• COAXIAL: Lights up when you switch to 
coaxial input source. When Dolby signal 
is detected,  COAXIAL indicator blinks 
for three seconds.
• OPTICAL: Lights up when you switch to 
optical input source. When Dolby signal 
is detected,  OPTICAL indicator blinks for 
three seconds.
• AUX : Lights up when you switch to 
analog input source. 
• MUSIC iLINK: Lights up when you switch 
to Music iLink input source. 
12
 
						

							5
English
EN
Remote control
 a  (Standby-On) Switch the SoundBar on or to standby.
b Source buttons• AUX: Switch your audio source to the 
AUX connection. 
• OPTICAL: Switch your audio source to 
the optical connection. 
• COAXIAL: Switch your audio source to 
the coaxial connection. 
• MUSIC iLINK: Switch your audio source 
to the MUSIC iLINK connection.
c SURROUND
Switch to vir tual surround mode on or off.
d TREBLE +/-
Increase or decrease treble.
e VOL +/-
Increase or decrease volume.
f BASS +/-
Increase or decrease bas s.
g MUTE
Mute or restore volume.
5
1
3
4
7
6
2
Replace battery
Warning
 •Danger of explosion if batter y is incorrectly replaced. 
Replace only with the same or equivalent type.
 •The product/remote control may or may not contain a 
coin/button type batter y, which can be swallowed. Keep 
the batter y out of reach of children at all times!
Caution
 •The batter y contains perchlorate material, 
handle it with care. For information see www.
dtsc.ca.gov/hazardouswaste/perchlorate.
 1 Open the batter y compar tment.
2 Inser t one CR2025 batter y, with the polarity 
(+/-) as indicated.
3 Close the batter y compar tment.
3
1
2
 
						

							6EN
5 Connect y our 
SoundBar
This section helps you connect your SoundBar to a 
TV and other devices. 
For information about the basic connections of 
your SoundBar and accessories, see the quick star t 
guide. For a comprehensive interactive guide, see 
www.connectivityguide.philips.com. 
Note
 •For identification and supply ratings, refer to the 
type plate at the back or bottom of the product.
 •Before you make or change any connections, 
make sure that all devices are disconnected from 
the power outlet.
Subwoofer
Follow the steps below to position and connect 
your subwoofer. 
Position
Place the subwoofer at least one meter (three feet) 
away from either to the left or right of your SoundBar, 
and ten centimeter away from the wall.
For best results, place your subwoofer as shown below.
 
Connect
Connect your subwoofer to your SoundBar as 
described in the quick star t guide.
Connectors
Connect other devices to your SoundBar.
Side right
 
MUSIC iLINK
Audio input from an MP3 player.
Rear left
 
a SUBWOOFER
Connect to the supplied subwoofer.
b AUDIO IN-AUX
Connect to an analog audio output on the TV 
or an analog device. 
c DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the TV 
or a digital device. 
d DIGITAL IN-OPTICAL
Connect to an optical audio output on the 
TV or a digital device. 
SUBWOOFER (8)
L
(WHITE)
R
(RED)
AUDIO I\f AUXCOAXIAL
OPTICAL
DI\bITA
L I\f
1234
 
						

							7
English
EN
Rear right
 
AC MAINS~
Connect to the power supply.
Connect audio from TV and 
other devices
Play audio from TV or other devices through your 
SoundBar. Use the best quality connection available 
on other devices.
Note
 •The audio connections in this user manual 
are only recommendations. You can use other 
connections too.
 •If you play audio from the TV through your 
SoundBar, make sure that the TV is muted.
Option 1: Connect audio through a digital 
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL 
connector on your SoundBar to the  OPTICAL 
OUT connector on the device.
The digital optical connector might be labeled 
SPDIF,  SPDIF OUT, or  OPTICAL.
 
AC MAINS~
TV
Option 2: Connect audio through a digital 
coaxial cable
Good quality audio 
Using a coaxial cable, connect the  COAXIAL 
connector on your SoundBar to the  COAXIAL/
DIGITAL OUT connector on the device.
The digital coaxial connector might be labeled 
DIGITAL AUDIO  OUT. 
 
Option 3: Connect audio through analog 
audio cables
Basic quality audio
Using an analog cable, connect the  AUX 
connectors on your SoundBar to the audio 
connectors on the device.
  
VCR
 
						

							8EN
6 Use your SoundBar
This section helps you use the SoundBar to play 
audio from connected devices.
Before you start
• Make the necessar y connections described in 
the quick star t guide and the user manual.
• Switch the SoundBar to the correct source 
for other devices.
Play audio from TV or other 
devices
  
Press the  Source buttons  to select the audio 
output of the connected device.
Adjust the volume
  
To increase or decrease volume, press VOL +/-.• The Source indicators  on the front panel 
blink thrice when the volume is set to either 
minimum or maximum.
To mute sound, press  MUTE.
• The current Source indicator  on the front 
panel blinks continuously.
To restore the sound, press MUTE again or press 
VOL +/-.
Choose your sound
This section helps you choose the ideal sound for 
your video or music.
Change treble or bass
Change the high frequency (treble) or low 
frequency (bass) settings of the SoundBar to suit 
your video or music.
  
Press TREBLE +/- or BASS +/- to increase or 
decrease treble or bass.
• The Source indicators  on the front panel 
blink thrice when the treble or bass is set to 
either minimum or maximum.
Surround sound mode
Experience an immersive audio experience with 
surround sound modes.
 
Press SURROUND repeatedly to switch surround 
mode on or off. 
 » When surround mode is on, the SURR on 
the front panel lights up.
Night mode
For quiet listening, decrease the volume of loud 
sounds when you play discs. Night mode is only 
available for Dolby encoded TV programs, DVD, 
and Blu-ray discs. 
 
Press and hold  SURROUND to switch night mode 
on or off. 
 » When the night mode is on, AUX indicator  
on the front panel blinks twice.