Philips Hts335w User Manual

							31
English
Playing a MP3/ WMA disc
This unit can playback most of the MP3 
and Windows Media™ Audio fi les 
recorded on a recordable disc or 
commercial CD.
Before you start ... 
Turn on your TV to the correct Video In 
channel. See ‘Finding the correct viewing 
channel’ for details.
A Insert a MP3/WMA disc. 

						

							32
EnglishPlaying a JPEG image fi le 
(slide show) 
Before you start ... 
Turn on your TV to the correct Video In 
channel. See ‘Finding the correct viewing 
channel’ for details.
z  Insert a JPEG photo CD (Kodak Picture 
CD, JPEG). 

						

							
33
English
Disc Operations (c o n t i n u e d )
Playing MP3/WMA mu sic and 
JPEG pictures simultaneously
You can create a musical slide show if the 
di sc contains both the MP3/WMA music 
and JPEG picture fi les.
A Insert a MP3/WMA disc that contains  music and pictures.
B Select a track in the menu and press  OK 
to start playback.
C During music playback, use  ST keys to 
select a picture fi le from the disc menu 
and press  OK. 

						

							34
EnglishPlaying from USB fl ash drive 
or USB memory card reader
You can play or view the data fi les (JPEG, 
MP3, Windows Media™ Audio or DivX) 
in the USB fl ash drive or USB memory 
card reader. However, editing or copying 
the data fi le is not possible.
A Connect the USB fl ash drive / USB 
memory card reader directly to the USB 
socket on this unit.
B A message appears on the TV for 5 (fi ve) 
seconds when the device is detected.
Press DISC/USB to select device
C Press DISC/USB on the remote control 
to access the data in the drive. 

						

							35
English
Playing from other portable 
audio player
Connect your portable audio player to 
this unit to get the best immersion sound 
experience through the speaker system. 
However, controlling of playback is only 
possible on the portable audio player.
A Use the supplied MP3 LINE-IN cable to 
connect between the ‘headphone’ output 
socket on your portable audio player and 
the MP3 LINE-IN socket on this unit.
B Press MP3 LINE-IN on the remote 
control. 
C Start playback on your portable audio 
player.  

						

							36
English
Setup Menu Options
Accessing the setup menu
This system setup is carried out via the 
TV, enabling you to customise this unit to 
suit your particular requirements. 
SLEEP
SETUP
OK
A In disc mode, press SETUP on the 
remote control.

						

							37
English
Setup Menu Options (c o n t i n u e d )
General Setup Page (underlined options are the factory default settings)
Disc Lock 
 Not all discs are rated or coded by the disc maker. You can 
prevent play of specifi c discs with the disc lock function. Up to 40 
discs can be locked.
{ Lock }  –  To block the playback of the current disc. 
Subsequent access to a locked disc requires a 
six-digit password. The default password is 
‘136900’ (see ‘Preference Setup Page - 
{ Password }).
{ Unlock }  –  All discs can be played.
Display Dim 
 Select the brightness of this unit’s display panel.
{ 100% }  –  Full brightness.
{ 70% }  –  Medium brightness.
{ 40% }  –  Dimmest display.  This switches off all LEDs and 
icons on the front display panel of this unit.
Program 
 Access the track programming menu. See ‘Programming disc 
tracks’ for details.
OSD Language 
 Select the menu language for this unit’s on-screen display.
Screen Saver 
 The screen saver prevents damage to the TV screen by avoiding 
exposure to a static image for too long.
{ On }  –  Switch to TV screen saver mode when 
playback has been stopped or paused for 
more than 5 minutes.
{ Off }  –  Turn off the screen saver function.
Sleep
 The sleep timer enables the unit to switch to standby mode 
automatically after the selected preset time.
{ 15/30/45/60 mins } – Select the preset minutes for switching 
the unit to standby mode automatically.
{ Off }  –  Turn off the sleep mode function.
DivX(R) VOD Code 
  Philips provides you with the DivX® VOD (Video On Demand) 
registration code that allows you to rent or purchase videos from 
DivX
® VOD service at www.divx.com/vod. All the downloaded 
videos from DivX® VOD can only be played back on this unit.  
 Press 
X to see the registration code and press OK to exit.
 
						

							38
EnglishAudio Setup Page (underlined options are the factory default settings)
Speakers Volume 
 Access the speaker’s level setup menu. Use W X keys to adjust 
the volume level for each connected speaker between -6dB to 
+6dB.
 See ‘Getting Started - Setting the speakers’ channels’.
Speakers Delay 
 Access the speaker’s distance setup menu. Use W X keys to set 
the delay times for the centre and rear speakers based on the 
listening position and distance. 
See ‘Getting Started - Setting 
the speakers’ channels’.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot 
change in distance. Use the longer delay time settings when the rear 
speakers are closer to the listener than the front speakers.
HDMI Audio 
 This setting is only required if you are using the HDMI 
OUT socket to connect your TV or other display device 
(see ‘Option 5: Connecting to a HDMI-compatible TV’).  
{ Off }  –  Turn off the HDMI audio output.  You 
can still enjoy the sound output through 
the speaker system.
{ All }  –  The HDMI audio output will be same as 
the audio stream being played back.  In 
the case when the playback audio format 
is not supported, the audio output will be 
changed to PCM (Pulse Code 
Modulation) automatically.
{ PCM only }  –  Downmix the audio signals to linear-
PCM (2-channel). 
Notes:  –  It may take a while for this unit and the input device to communicate 
and initialise.
–  It is not possible to listen to SACDs or copy-controlled DVD-Audio 
CPPM (Content Protection for Playable Media) sources using the HDMI 
connection.
Setup Menu Options (c o n t i n u e d )
 
						

							39
EnglishCD Upsampling 
 This feature enables you to convert the music CD to a 
higher sampling rate using sophisticated digital signal 
processing for better sound quality. 
{ Off }  –  Turn off CD-upsampling.
{  88.2 kHz (X2) }  –  To convert the sampling rate of the CDs 
twice as high as the original rate.
Notes:  –  If you have activated the CD upsampling feature, the audio output 
automatically switches to stereo mode.
–  If you press the SURROUND button on the remote control to select 
multi-channel mode, it turns off the CD upsampling feature.
Audio Sync 
 This feature allows you to adjust the audio delay times if the 
video playback is slower than the audio output streams.
 Use W X keys to set the delay times for the audio output 
between 0~200ms.
Audio Setup Page (underlined options are the factory default settings)
Setup Menu Options (c o n t i n u e d )
 
						

							40
EnglishVideo Setup Page (underlined options are the factory default settings)
TV Type
 Select the colour system that matches the connected TV. It 
enables playback of a different type of disc (PAL or NTSC disc) 
on this unit.
{ PAL }  –  For PAL-system TV.
{ NTSC }   –  For NTSC-system TV.
{ Multi }   –  For TV that is compatible with both PAL and 
NTSC.
TV Display 
 The picture shape can be adjusted to fi t your TV. 
{ 4:3 Pan Scan } –  For a full-height picture with 
the sides trimmed.
{ 4:3 Letter Box } – For a ‘wide-screen’ display 
with black bars on the top and 
bottom.
{ 16:9 Wide Screen } – For wide-screen TV 
(frame ratio 16:9). 
Progressive 
 Before enabling the progressive scan feature, you must ensure that 
your TV can accept progressive signals (a progressive scan TV is 
required) and that you have connected this unit to your TV using 
the Y Pb Pr. See ‘Getting Started - Setting up progressive scan 
feature’ for details.
{ On }  –  Turn on progressive scan mode. 
Read the instructions on the TV and confi rm 
your action by pressing OK on the remote 
control.
{ Off }  –  Turn off the progressive scan mode.
Picture Setting
 This unit provides three predefi ned sets of picture colour settings 
and one personal setting which you can defi ne yourself.
{ Standard }  –  Original colour setting.  
{  Bright }  –  Vibrant colour setting.
{ Soft }  –  Warm colour setting.
{ Personal }  –  Select this to personalise the picture colour 
setting. Use W X keys to adjust to the setting 
that best suits your personal preference and 
press OK to confi rm. For an average setting, 
select { 0 }.
Note:  Picture setting option is not applicable for HDMI connection.
Setup Menu Options (c o n t i n u e d )
Brightness
Contrast
Tint
ColorPersonal Picture Setup