Pioneer Kuro Pro Fpj1 Projector User Manual

Printed in Japan
Imprimé au Japon Published by Pioneer Corporation.
Copyright © 2008 Pioneer Corporation.
All rights reserved.
Publication de Pioneer Corporation.
© 2008 Pioneer Corporation.
Tous droits de reproduetion et de traduction réservés.
PIONEER CORPORATION4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.  TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.300 Allstate Parkway, Markham, Ontario L3R 0P2,...

1
2
Getting Started
Safety Precautions
IMPORTANT INFORMATION
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
To reduce the risk of electric shock, do not remove 
cover. Refer servicing to qualified service personnel.
PRO-FPJ1U_EN.book  Page 2  Tuesday, February 19, 2008  9:09 AM 

3
ENGLISH
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
About the installation place
Do not install the projector in a place that cannot support 
its weight securely.
If the installation place is not sturdy enough, the projector 
could fall or overturn, possibly causing personal injury.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This 
unit has been engineered and manufactured to assure 
your personal safety. But IMPROPER USE CAN RESULT 
IN...

4
Safety Precautions (Continued)
1Getting Started
-To allow better heat dissipation, keep a clearance between 
this unit and its surrounding as shown below. When this 
unit is enclosed in a space of dimensions as shown below, 
use an air-conditioner so that the internal and external 
temperatures are the same.
-This product should be operated only with the type of 
power source indicated on the label. If you are not sure of 
the type of power supply to your home, consult your 
product dealer or local...

5
ENGLISH
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
POWER CONNECTION
WARNING:
Do not cut off the main plug from this equipment.
If the plug fitted is not suitable for the power points in 
your home or the cable is too short to reach a power 
point, then obtain an appropriate safety approved 
extension lead or adapter or consult your dealer.
If nonetheless the mains plug is cut off, dispose of the 
plug immediately, to avoid a possible shock hazard by 
inadvertent...

6
1Getting Started
...................................................Getting Started
Safety Precautions................................................ 2
Contents..............................................................6
How to Read this Manual/
Accessories/Optional Accessories ....................... 7
About this Manual ........................................................... 7
Check the Accessories...................................................... 7
Optional Accessories...

7
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
ENGLISH
How to Read this Manual/
Accessories/Optional Accessories
zInstruction manual, warranty card and other printed material are also included.
Please check with your authorized dealer for details.
z
Replacement Lamp: BHL5009-S(P) (Lamp Unit) 
zReplacement Filter: LC32058-002A (Inner Filter) 
About this Manual
This manual mainly describes the operating method using the remote 
control.
z
Buttons on the remote control are...

1
8
Getting Started
Controls and Features
„Rear Side/Top Surface
Exhaust VentTo adjust the focus.
To adjust the size of the image.
zOperate using the remote control. (pP18)
zDo not turn the lens with your hands.
CAUTION
Lamp Cover (pP38)
To connect the power cord (pP18) Remote Sensor (pP11)
„Front Side/Left Side
Remote Sensor
(pP11)
Air Inlets
Lens Cap
zThis unit comes with buffer material that cushions the lens. Remove the buffer 
material before use. 
zDo not throw away the buffer material, retain for...

9
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
ENGLISH
WARNING
LAMP
STANDBY/ON
HIDE INPUT STANDBY/ON
MENU
ENTEREXIT
Light on (Red):
Warning mode (pP37)
Light on/Blinking (Orange):
Lamp warning (pP37)
To turn on/off the power
To hide the image temporarily (pP19)
To return to the previous menu To switch input
(pP18)
To display the menu
(pP22) Light on (Red):
Standby mode
Light on (Green):
During projection
Blinking (Green):
Image is temporarily hidden
(pP19)
Blinking (Red):...

10
Controls and Features (Continued)
1Getting Started
„Remote Control
LIGHT TESTEXIT MENU
ENTER
To turn on the power
To set the screen size
(pP20)
To set gamma
(pP32)
To adjust the outline of the image
(pP32)
To set color temperature
(pP32)
To hide the image temporarily
(pP19) To adjust brightness
(pP32)
To return to the previous menu
To illuminate buttons on the remote control
To select or confirm Select input mode (pP18) To turn off the power
To adjust color density
(pP32) To switch AV Selection...