Pioneer Kuro Pro Fpj1 Projector User Manual

21
Getting Started PreparationBasic OperationSettings Troubleshooting Others
ENGLISH
BMask the image
aDisplay the setting menu
bSelect “Setup” g “Screen Crop”
cSet a mask value
CTo end
zMasking is available only when high 
definition images are input.
MEMO
Setup
PictureSource Install1 Install2 Info.
Picture Adjust
Color Temp.
Gamma
Offset
Pixel AdjustMENU
AV Selection
User Setting
Picture Position
HDMI Signal Type
Screen Crop
Setup Picture Source Install1 Install2 Info.
2.5%
5%
Off
Overscan
ENTER...

22
4Settings
Setting Menu
Example:
When changing “Aspect” from “4:3” to “16:9”
ADisplay the setting menu
BSelect “Source” g “Aspect”
CSet to “16:9”
DTo end
Projected images can be adjusted to a desired view by changing the default settings.
Procedures for Menu Operation
LIGHT TESTEXIT MENU
ENTER
MENU
Setup
PictureSource Install1 Install2 Info.
Picture Adjust
Color Temp.
Gamma
Offset
Pixel Adjust
Setup
PictureSourceInstall1 Install2 Info.
Video Format
HDMI
AspectPureCinema
Color System
Black Level4:3...

23
ENGLISH
Getting Started Preparation Basic OperationSettingsTroubleshooting Others
Item values shown in   are factory settings.
zItems that can be configured differ according to the input signals.
z“Contrast”, “Brightness”, “Color” and “Sharpness” can also be configured from the remote control. (pP10)
z“Tint” can only be adjusted when NTSC signals are input to the video or S-video input terminal.
*The red, green and blue colors can be adjusted and registered respectively.
zThis setting can also be...

4
24
Setting Menu (Continued)
Settings
z
“Standard” is suitable for normal circumstances but other settings can be selected according to your preferences.
zThis setting can also be configured from the remote control. (pP10)
*“Gamma Adjust”
ASelect the reference gamma curve coefficient (1.8 to 2.6) in “Correction Value”.
BSelect the color to be adjusted in the gamma adjustment screen.
DTo end
zIf gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able...

25
ENGLISH
Getting Started Preparation Basic OperationSettingsTroubleshooting Others
zThe horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
zTo adjust, use still images with distinct outlines.
zAs the adjustments are minor, the effect may be difficult to see for some images.
zThis setting can also be configured from the remote control. (pP10)
z“Contrast”, “Brightness”, “Color”, “Sharpness”, “DNR”, “Color Temp.”, “Gamma” and “Offset” are...

4
26
Setting Menu (Continued)
Settings
z
The display position value varies with the input signal.
zThis adjustment is available for analog input signals, or for COMPONENT and HDMI-1/2 input signals when “V-Stretch” is set to 
“On”.
zThis setting is available only when projecting the HDMI input.
zMasking is available only when high definition images are input.
zThis setting is not available when PC signals are input to HDMI terminal.
zThis setting is available only when projecting the component video...

27
ENGLISH
Getting Started Preparation Basic OperationSettingsTroubleshooting Others
zThis setting can also be configured from the remote control. (pP10, 20)
zThis setting is not available when PC signals are input to HDMI terminal.
Source > Aspect (When SD video signals are being input)
SAspect
Configures the screen size (aspect ratio) of the projected image.
4:3Sets screen size of the projected image to 4:3.
16:9Sets screen size of the projected image to 16:9.
ZoomZooms the image.
Source > V-Stretch...

4
28
Setting Menu (Continued)
Settings
z
This setting is available only when projecting the video or S-video input.
zThis setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Source > Color System
WColor System
Configures the color system.
AutoConfigures the color system automatically.
NTSCSelect this when the color system is NTSC.
NTSC4.43Select this when the color system is NTSC4.43.
PALSelect this when the color system is PAL.
PAL-MSelect this when the color...

29
ENGLISH
Getting Started Preparation Basic OperationSettingsTroubleshooting Others
Install1 > Input info.
aInput info.
Sets whether to display the input when switching input.
5 secDisplays for 5 seconds.
OffDo not display.
Install1 > Flip H
bFlip H
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.
OffDo not flip image to the left or right.
OnFlips image to the left or right.
Install1 > Flip V
cFlip V
Select this when the projector is...

4
30
Setting Menu (Continued)
Settings
z
Changing the lamp power will not change the lamp time (lamp life).
zThe setting cannot be changed within approximately 90 seconds after this unit has been turned on.
zSettings cannot be changed within approximately 60 seconds after they are made.
zThis can also be displayed from the remote control. (pP10)
Install2 > Startup Logo
gStartup Logo
Sets whether to display “Startup Logo” during startup.
OffDo not display.
OnDisplays for 5 seconds.
Install2 > Lamp Power...