Plus Projector Up 800 User Manual

E Ð 21
This section descr ibes how to select a computer or video sour ce and how to adjust the pictur e and
sound.
Gener al Contr ols Before y ou tur n on y our UP-800 Da ta Projector,   ensure that the computer or
video source is turned on and that your lens cap is removed.
1. Tur n On The Da ta Projector  T he main po wer s witc h is on the bac k panel of the UP-800 Da ta
Projector . By turning this s witch on, the projector will g o into its standb y mode and the po wer
light will glo w amber. Onl y...

E Ð 22
Using The Menus
1. Press the Men u button on the r emote control or projector ca binet to displa y the Main Men u.
2. Pr ess the Select b utton on the projector cabinet or (s) ( t) b uttons on y our remote contr ol to highlight the men u for
the item y ou want to adjust.
3. Pr ess the Enter b utton on the projector cabinet or the Left Clic k button on the r emote control to select a submen u or
item.
4. Adjust the le vel or turn the selected item on or of f by using the Adjust (+) or (Ð) b uttons...

E Ð 23
Enables you to select a video sour ce such as a VCR, laser disk pla yer, computer or document camer a
depending on what is connected to your inputs. Press the Select button on the projector cabinet or
( s ) ( t) buttons on your remote control to highlight the menu for the item you want to adjust.
Video
Selects what is connected to your Video input-VCR, laser disk player or document camera.
S-Video
Selects what is connected to your S-Video input-VCR, or laser disk player.
RGB
Selects wha t is...

E Ð 24
Provides access to contr ols for your image and sound. Use the ÒSelectÓ b utton on the projector cabi-
net or ( s) (t) buttons on your remote contr ol to highlight the menu for the item y ou want to adjust.
T he v olume,  brightness,  contrast, color , tint,  shar pness and Ima ge Mode contr ols are availab le for
Video or S-Video sources.
The volume, brightness, contrast, horizontal position, vertical position and auto picture controls are
available for RGB source.
Volume
Use the ÒAdjustÓ (+) or...

E Ð 25
Power Menu
Horizontal Position**
Use the ÒAdjustÓ (+) button to move the image right; (Ð) to move it left.
Ver tical Position**
Use the ÒAdjustÓ (+) button to move the image up; (Ð) to move it down.
A uto Picture**
Use the  ÒAdjustÓ  (+) button to tur n this feature on so  ÒPictureÓ and  ÒFine PictureÓ  adjustments are
made automatically . Use the ÒAdjustÓ (Ð) button to tur n this feature of f so you can mak e ÒPicture and
Fine PictureÓ adjustments manually.
Picture Adjustment** (when A UTO...

E Ð 26
Settings MenuEnables you to set preferences and other operating options. Use the ÒSelectÓ button on the projector
cabinet or ( s) (t) buttons on your remote control to access the submenu you want.
Custom Memor y
 T his ena bles y ou to sa ve y our cur rent settings f or an RGB sour ce in one of five memor ies, Custom 1-
5.
ÒCustom 6Ó  is read only. This featur e is useful when an S-VGA image (800 ´600) is displa yed with a
notebook computer supported by XGA (1024 ´768).
To change the STANDARD...

E Ð 27
This section describes the simple maintenance procedures you
should follo w to replace the lamp,  clean and r eplace the ba tteries in
the remote control.
Replacing The Lamp
After your lamp has been operating for 1000 hours or longer, the
ÒstatusÓ light in the cabinet will go on. Even though the lamp may
still be working, replace it at 1000 hours to maintain optimal pro-
jector performance.
CAUTION
¥ DO NOT TOUCH  THE LAMP immedia tely after it has been
used . It will be e xtremely hot. Allow a t...

E Ð 28
Remote Control Battery Installation
1. Press firmly and slide the ba tter y cover off.
2. Remove all two old ba tter ies and install new ones (AA). Ensur e
that you have the batter ies polarity (+/Ð) aligned cor rectly.
3. Slip the co ver back over the batter ies until it snaps into place.
Remote control effective range 

E Ð 29
This section helps y ou r esolve problems you ma y encounter while setting up or using y our UP-800 Data Projector.
Status Light Messages
Condition
OFF
On Continually
Blinking  Ver y Rapidly (On and of f
in a cycle of 1 sec.)
Blinking Rapidly
(On and of f in a cycle of 4 sec .)
Blinking Slowly (On and off in a
cycle of 8 sec.)
Blinking Very Slowly (On and off in
a cycle of 12 sec.) Status
Normal
The projector lamp has exceeded 1000 hours of operation and should be replaced.
¥ The lamp housing is...

E Ð 30
Common Problems & Solutions
Problem
Does not turn on
No picture
Image isnÕt square to the screen
Picture is blurred
Image is scrollingvertically,
horizontally or both
Remote contr ol does not work
Status indicator is lit or blinking
Cross color in RGB mode Check These Items
¥ Check that the cord is plugged in and that the power switch on the back panel is
on.
¥ Check the status light to see if the projector has overheated or the lamp usage
exceeds 1100 hours.
¥ Use the menu icons to select your...