Polaroid Projector Polaview 110 User Manual

Polaview 110 Projector
User Guide 

FCC StatementW a r n i n g :This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interfer-
ence to radio communications. It has been tested and found
to comply with limits for a Class “A” computing device pur-
suant to Subpart B of Part 15 of the FCC Rules, which are
designed to provide reasonable protection against such
interference when operated in a commercial environment.
Operation of this equipment...

1 Introduction
What’s in the box?2
Quick start3
Connector panel6
Control panel72 Detailed setup
Your Polaview Model 110 Projector9
Getting started1 0
Connector panel1 3
Supplying power to the projector1 5
Computer video and audio connections1 63 Using the projector
Turning on the projector and lamp2 5
Control-panel keys2 8
Using the remote control3 1
Using the Main menu3 6Table of contents 

iiTable of contents3 Using the projector
SETUP menu3 7
INPUT menu3 9
IMAGE menu4 0
OPTION (OPT.) menu4 2
Setting the timer4 4
Quick menus4 44 Maintenance
Cleaning the lens 4 5
Replacing the lamp4 6
Cleaning the air filter4 8
Changing the remote-control batteries5 05 Troubleshooting
Troubleshooting guide5 1
Where to get help5 5
Polaroid Offices and Service Centers5 6
One Year Warranty5 8Appendix A: Specifications59Appendix B:Parts61Index63 

The Polaroid Polaview Projector family consists of portable,
color data and video projection products that make sharing
data and presenting information as easy as connecting your
computer to your monitor.
This manual covers the Polaview Model 110 Projector,
which provides images of unrivaled clarity and color 
a c c u r a c y .
The Polaview 
Model 110 Projector
in use1 Introduction 

What’s in the box?
After you open the box and take out the projector and acces-
sory packs, make sure you have all of the items shown.
Caution!The projector should be treated like any other pre-
cision optical instrument. Handle it carefully.
Items included with 
the projector
aProjectorfAV cable
bRemote controlgMini-stereo to
cNorth American power cordmini-stereo cable
dSerial cableh
Mac–VGA cable adapter
eVGA video cable 2Introduction 

Also included but • 2 AA alkaline batteries
not shown
• European power cord
• User’s guide
• U.K. power cord
• Product registration cardQuick start
Place the Model 110 projector on a solid flat surface at a
right angle (perpendicular) to the projection screen, parallel
to the floor. Follow the appropriate section below for the
type of system that you have. These steps are described in
Chapter 2, Detailed setup.
Note:The projector has two sets of computer video and
audio inputs. The following examples...

3Plug the Mac end of the Mac - VGA cable adapter into your
computer Video port.
4Connect your audio source to the AUDIO 1 IN port on the
p r o j e c t o r .
5To project and view the monitor at the same time, plug the
monitor cable into the RGB OUT port of the projector.
Note: The projector only supports the Multi-Sync standard
for separate monitors to be used with Macintosh desktop
computers. Other monitor connectors cannot be used.
6Turn the projector on and press the STANDBY/ON key.
Note: If you turn...

Special configurations
If your computer has an internal monitor but no external
video capability (such as the Macintosh Performa 575, 
PowerMac 5200, and certain PowerBooks), you need a
video adapter card to attach it to the Model 110 projector.
Setup for a third-party adapter is identical to the procedures
outlined in the Quick startsection above. Contact your deal-
er, Polaroid Customer Service, or a third-party supplier for
more information about an appropriate video adapter.Introduction5 

6IntroductionConnector panel
All connections between the Model 110 projector and com-
puter or video source are made on the side connector panel.
The connector panelC o n n e c t o rD e s c r i p t i o n
aVIDEO 1 & 2 Connects to video output from an
NTSC, PAL, or SECAM source.
bS-VIDEO 1 & 2 Connects to an  S-Video source.
cCYCLOPS port Connects your computer to the
Cyclops interactive pointer system.
dAUDIO IN 1 & 2 Connects to stereo/mono audio
output from a computer.
eRGB IN 1 & 2  Connects computer...