Polaroid Projector Polaview 110 User Manual

O p t i o nWhat it doesS o u r c eV. POSIT Adjusts the vertical position of  C o m p u t e r
the projected image.o n l yH. POSIT Adjusts the horizontal positionC o m p u t e r
of the projected image.o n l yH. PHASE Adjusts the horizontal phase Computer 
setting. Use this setting if you  o n l y
see uneven horizontal features, 
streaks, or shimmering in a 
computer video image.H. SIZE Adjusts the width of aC o m p u t e r
computer display.o n l y38Using the projector   

INPUT menu
Use the Input menu to select a video source. 
•Use the arrow keys to select a source.
•If you choose VIDEO 1 or VIDEO 2, select a video format.
•Select TEST PATTERN to adjust your focus.
INPUT menu screen Menu itemO p t i o n sF u n c t i o n
RGB 1 or 2Selects the RGB 1 or 
2 port.VIDEO 1 or 2Selects the VIDEO 1
or 2 port and the 
video signal type:
A U T O
N T S C
P A L
S E C A MTEST PATTERNDisplays a full-screen
test pattern.Using the projector39 

IMAGE menu
Use this menu to adjust the projected video image and
select how the projector displays the image.
IMAGE menu screenMenu itemO p t i o n sF u n c t i o nM I R R O RStandard operating  
m o d e .
Flips the picture 
h o r i z o n t a l l y ,
vertically, or
horizontally and 
v e r t i c a l l y .B L A N KSelects a blank color
(white, blue, or
b l a c k ) .40Using the projector   

Menu itemO p t i o n sF u n c t i o nR E V E A LSelects the speed for 
revealing an image.MENU SIZEChanges the 
on-screen menu size.M E S S A G ETurns the on-screen
image source
messages on or off.C Y C L O P SInitiates Cyclops
calibration. See
the Cyclops user’s
guide for more
information. Press
CANCEL to cancel 
the calibration.Using the projector41 

OPTION (OPT.) menu
The OPT. menu is used to control the projector communica-
tions settings.
OPT. menu screenMenu itemO p t i o n sF u n c t i o nCOM. SPEEDSelects the speed of
data transmission.COM. BITSSelects the format of
data transmission:
Use 7N1 for 7 data-
bits, No parity, 1 stop 
bit. Use 8N1 for 8 
data-bits, No parity, 
1 stop bit.42Using the projector   

Menu itemO p t i o n sF u n c t i o nM O U S ESelects the speed of
mouse movement.T I M E RSets the duration of
the break timer. L A N G U A G ESets the language
for the menu 
d i s p l a y s .AUTO OFFSets the time the
projector can run
with no action before
it automatically turns
off. The maximum is
99. Press RESET to 
set it to 0.Using the projector43 

Setting the timer
You can set the timer to count down for breaks, class activi-
ties, and other presentation requirements.
1From the Options menu, choose Timer and press the right
MENU key on the control panel or move the joystick to the
r i g h t .
2When the Timer menu appears, use the MENU keys on the
control panel or the joystick on the remote control to set the
t i m e .
3Press MENU, and the clock begins to count down.Quick menus
The projector has Quick menus for easy adjustment of vol-
ume, focus,...

Your Polaview Model 110 Projector requires minimal main-
tenance; however, follow these recommendations for peri-
odic maintenance to ensure top performance.
The lamp, lenses, mirrors, and LCD panels have been care-
fully aligned at the factory to give you the clearest, brightest
image possible. However, mishandling can cause misalign-
ment or damage to the optical elements. Take appropriate
care when you use or handle any of the optical elements.Cleaning the lens
From time to time, you need to clean the...

Replacing the lamp
1Turn off the projector.
2Unplug the projector power cord from the wall socket and
from the projector power receptacle. 
3Loosen and remove the screw located on the right side of
the rear panel and remove the service door.
Removing the 
service door
4Loosen the 4 lamp-assembly screws (you cannot remove
them from the service door).
Loosening the 
lamp-assembly 
screws
Caution: The lamp assembly gets very hot during opera-
tion. Use appropriate care when changing lamps. Make sure
that...

5Grasp the lamp assembly and firmly pull it straight out of
the projector, as shown below.
Removing the lamp
assembly
6Replace the old lamp assembly with a new one, carefully
aligning the power pins on the bottom, and pressing it firm-
ly into place. When the assembly is properly installed, a
small alignment mark etched on the projector chassis is visi-
ble below the lamp assembly.
7Tighten the 4 lamp-assembly screws.
8Replace the service door and screw it into place.
9Plug the power cord back into the...