Radio Sangean WR1 Operating Instruction

							WR-1GB
F
E
NL
D
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF “DANGEROUS
VOLTAGE” INSIDE THE
RADIO.CAUTION: TO REDUCE THE
RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
THE BACK, NO USER SER-
VICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PER-
SONNEL.CAUTION
  RISK OF ELECTRIC
SHOCK DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF IMPORTANT
INSTRUCTIONS
ACCOMPANYING THIS
RADIO.!Operating instruction
Mode d’emploi
Instruccions de manejo
Gebruiksaanwijzing
Bedienungsanleitung 
						

							1  IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
    the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
    heat registers, stoves, or other apparatus (including amplifiers)
    that produce heat.
9. Do not defeat the safety purpose of the polarized or
    grounding-type plug. A polarized plug has two blades with one
    wider than the other. A grounding type plug has two blades and a
    third grounding prong. The wide blade or the third prong are
    provided for your safety. If the provided plug does not fit into your
    outlet. consult an electrician for replacement of the obsolete outlet. 
						

							2GB 10. Protect the power cord from being walked on or pinched
       particularly at plugs, convenience receptacles, and the point
       where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
       the manufacturer, or sold with the apparatus. When a cart is
       used, use caution when moving the cart/apparatus combination
       to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
       long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
       required when the apparatus has been damaged in any way,
       such as power-supply cord or plug is damaged. liquid has been
       spilled or objects have fallen into the apparatus, the apparatus
       has been exposed to rain or moisture, does not operate
       normally, or has been dropped.
15. To Reduce the Risk of Fire or Electric Shock, Do not Expose
       This Appliance To Rain or Moisture.
16. The Shock Hazard Marking and Associated Graphical Symbol is
       provided on the bottom panel of unit.
17. Apparatus shall not be exposed to dripping or splashing and no
      objects filled with liquids, shall not be placed on the apparatus. 
						

							3  Features
(1) AM/FM 2 bands.
(2) Wooden cabinet made of MDF in real cherry or walnut or other
      optional wood veneer.
(3) Soft and precision tuning.
(4) Rotary tuning and volume control.
(5) Tuning LED indicator.
(6) Detachable power cord.
(7) Headphone socket.
(8) REC out socket can be used as a separate tuner to the
      Hi-Fi amplifier or record the radio program by using the output .
(9) Aux in. socket to connect stereo/mono audio source like
     CD walkman. 
						

							4GB (10) 3 inches 7W full range heavy-duty magnet speaker.
(11) Dynamic Bass compensation for rich bass.
(12) External AM antenna terminal to connect outdoors AM antenna
        (USA version only).
(13) External F type FM antenna terminal to connect outdoors
        FM antenna.
(14) Internal/External FM antenna switch to select built-in or
        external antenna.
(15) 9-14 voltages power adaptor socket for AC adaptor or
        vehicle/boat power. 
						

							5 
						

							6GB   Controls
     Power and AM/FM band switch
     Volume Control
     Speaker
     Dial scale
     Dial indicator
     Tuning Control
     AC power cord socket
     12V DC input socket ( ideal for vehicles/boats )
     Headphone socket
     REC out socket
     Aux in socket
     External/Internal antenna switch
     F-type external antenna terminal
     AM external antenna terminal (USA version only )
     Tuning LED indicator
  Power your radio
AC operation
Before you plug the AC cord into the radio, be sure the AC voltage is
correct. Insert the plug on the end of the supplied power cord into the
AC power socket on the back of the radio.
DC operation
For outdoors use, you can power the radio by using 12V DC input
socket from a DC power supply (example, from the power supply of
vehicles or boats).  An AC power adaptor with 1 Ampere and center
positive in polarity can also power the radio in house.101234567891112131415 
						

							7  Operating your radio FM
1. Connect the Antenna
The radio comes with built-in AM/FM antenna. To improve
FM reception, insert the end of the supplied FM wire antenna into
the F-type antenna terminal and adjust the wire for best reception.
A 75 ohm coaxial cable of outdoor antenna may also be attached
to the terminal. Be sure to switch external/internal antenna switch to
external position while using the supplied wire antenna or connect
the outdoor antenna. In some of the European countries, you may
have to connect the supplied antenna terminal adaptor to connect
with the outdoor antenna.
2. Turn on your radio by switching the Power knob to FM position.
3. Rotate the Tuning Control to select the desired station. On FM,
    the tuning scale is marked in MHz (Megahertz). The tuning
    LED indicator will appear brightest when best tuning has
    been achieved.
4. Adjust the Volume Control for comfortable listening.
5. To switch off the radio , turn the Power knob to OFF position. 
						

							8GB   Operating your radio AM
1. Connecting the antenna
The radio comes with built-in AM antenna which should be
enough for normal listening. To improve the AM reception,
you may connect the outdoor AM antenna with AM antenna
terminal (USA version only).
2. Turn on your radio by switching the Power knob to AM position.
3. Rotate the Tuning Control to select the desired station. On AM,
    the tuning scale is marked in kHz (Kilohertz). The tuning LED
    will appear brightest when best tuning has been achieved.
4. Rotate your radio for best reception.
5. Adjust the Volume Control for comfortable listening.
6. To switch off your radio , turn the power knob to OFF position.
  Headphone use
Headphone use with this radio should be fitted with a 3.5 mm jack
plug. Insert the headphones plug into the socket marked     on the
rear side of the radio. When the headphones are plugged in, the
loudspeaker is automatically disconnected.
  AUX IN socket
Connect a stereo or mono audio source (like CD walkman) to this
input to listen the audio program via the speaker. 
						

							9  REC out socket
The radio can be used as a separate tuner by connecting this input to
Hi-Fi system (amplifier) or using this input to make recording in mono
from audio program.
  Specifications
Frequency Coverage:
FM  87.50 - 108   MHz
AM     520 - 1710 kHz
Power: AC 120 V/60 Hz/25W or AC 230 V/50 Hz/25W
Internal Antenna System:
AM Built-in ferrite aerial
FM Built-in wire aerial
External antenna terminal:
AM antenna terminal (USA version only)
FM F-type antenna terminal
Output Power:  7W 10% T.H.D. @100Hz
Headphones socket:
3.5 mm dia. Stereo jack monaural output
Output : 5mW + 5mW