Home
>
RadioShack
>
Communications receiver
>
RadioShack Pro 2020 Vhf Uhf Scanner Reciever Instructions Manual
RadioShack Pro 2020 Vhf Uhf Scanner Reciever Instructions Manual
Here you can view all the pages of manual RadioShack Pro 2020 Vhf Uhf Scanner Reciever Instructions Manual. The RadioShack manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 1
![Page 1
PRO-2020 Scanner
(200-0112) Operation Faxback Doc. # 45530
Operating Your Pro-2020
Turn on your Pro-2020 by rotating [VOLUME] clockwise. (When first turned
on, your Pro-2020 may start scanning).
Rotate [SQUELCH] fully counterclockwise. Youll hear a rushing noise from
the speaker. Slowly rotate [SQUELCH] clockwise until the noise just stops.
Youre now ready to start entering frequencies.
Programming Frequencies
Before programming frequencies, make...](http://img.usermanuals.tech/thumb/5706/83773/w300_radio-shack_pro-2020-vhf-uhf-scanner-reciever_short-manual_d-0.png "Page 1
PRO-2020 Scanner
(200-0112) Operation Faxback Doc. # 45530
Operating Your Pro-2020
Turn on your Pro-2020 by rotating [VOLUME] clockwise. (When first turned
on, your Pro-2020 may start scanning).
Rotate [SQUELCH] fully counterclockwise. Youll hear a rushing noise from
the speaker. Slowly rotate [SQUELCH] clockwise until the noise just stops.
Youre now ready to start entering frequencies.
Programming Frequencies
Before programming frequencies, make...")
PRO-2020 Scanner (200-0112) Operation Faxback Doc. # 45530 Operating Your Pro-2020 Turn on your Pro-2020 by rotating [VOLUME] clockwise. (When first turned on, your Pro-2020 may start scanning). Rotate [SQUELCH] fully counterclockwise. Youll hear a rushing noise from the speaker. Slowly rotate [SQUELCH] clockwise until the noise just stops. Youre now ready to start entering frequencies. Programming Frequencies Before programming frequencies, make...
Page 2
![Page 2
a channel. As soon as the signal ends, the scanning function will resume.
Most communications heard will be two-way. To make sure you dont miss any
replies, press [DELAY]. This will cause your Pro-2020 to stay on a channel
for two seconds after the end of a transmission, giving you time to hear
any reply. To release the Delay function, just press [DELAY] again. The
Delay indicator will show on the display when the Delay function is used.
Lockout Function
You may want your Pro-2020 to skip...](http://img.usermanuals.tech/thumb/5706/83773/w300_radio-shack_pro-2020-vhf-uhf-scanner-reciever_short-manual_d-1.png "Page 2
a channel. As soon as the signal ends, the scanning function will resume.
Most communications heard will be two-way. To make sure you dont miss any
replies, press [DELAY]. This will cause your Pro-2020 to stay on a channel
for two seconds after the end of a transmission, giving you time to hear
any reply. To release the Delay function, just press [DELAY] again. The
Delay indicator will show on the display when the Delay function is used.
Lockout Function
You may want your Pro-2020 to skip...")
a channel. As soon as the signal ends, the scanning function will resume. Most communications heard will be two-way. To make sure you dont miss any replies, press [DELAY]. This will cause your Pro-2020 to stay on a channel for two seconds after the end of a transmission, giving you time to hear any reply. To release the Delay function, just press [DELAY] again. The Delay indicator will show on the display when the Delay function is used. Lockout Function You may want your Pro-2020 to skip...
Page 3
![Page 3
1. Press [PROGRAM] key.
2. Press [LIMIT] key. Enter the lower limit of frequency range to be
searched (such as 45.00 MHz). Press [ENTER].
3. Press [LIMIT] key again. Enter the upper limit of frequency range to
be searched (such as 46.00 MHz). Press [ENTER].
4. Press either [up arrow] or [down arrow] to start Search. [Down arrow]
will start search from the highest frequency and go down. [Up arrow]
will start from the lowest frequency and go up.
5. You can...](http://img.usermanuals.tech/thumb/5706/83773/w300_radio-shack_pro-2020-vhf-uhf-scanner-reciever_short-manual_d-2.png "Page 3
1. Press [PROGRAM] key.
2. Press [LIMIT] key. Enter the lower limit of frequency range to be
searched (such as 45.00 MHz). Press [ENTER].
3. Press [LIMIT] key again. Enter the upper limit of frequency range to
be searched (such as 46.00 MHz). Press [ENTER].
4. Press either [up arrow] or [down arrow] to start Search. [Down arrow]
will start search from the highest frequency and go down. [Up arrow]
will start from the lowest frequency and go up.
5. You can...")
1. Press [PROGRAM] key.
2. Press [LIMIT] key. Enter the lower limit of frequency range to be
searched (such as 45.00 MHz). Press [ENTER].
3. Press [LIMIT] key again. Enter the upper limit of frequency range to
be searched (such as 46.00 MHz). Press [ENTER].
4. Press either [up arrow] or [down arrow] to start Search. [Down arrow]
will start search from the highest frequency and go down. [Up arrow]
will start from the lowest frequency and go up.
5. You can...
Page 4
200-0112 PRO 2020 SCANNER Faxback Doc. # 21316
To order parts call 1-800-843-7422 or visit your local RadioShack store.
Reference # Cat.No. Description NP Part #
------------------------------------------------------------------------
11319340 REPLACED BY DX-0162 1N60
11319373 1N60P
11319548...
Page 5
REPLACED BY HD1673 HD1797
15 10727089 JACK,2P PHONE 3.5MM J0960
14 10728640 JACK ANTENNA J1169
10729382 JACK RCA J1297
10731966 TERMINAL PRESSURE J4634
SOCKET 42P IC J7028
10740520 STORE STOCK UNDER 270-324...
Page 6
R244 RR1 R6 R10 R36 10942209 5.6K 5% 1/4W CBF RES N0257EEC R37 10942209 N0257EEC R101 R105 R116 R120 10942498 10K 5% 1/4W CBF RES N0281EEC R140 10942498 N0281EEC R145 R154 R158 R168 10942498 N0281EEC R173 10942498 N0281EEC R175 R180 R182 R218 10942498...