Home > Ricoh > Printer > Ricoh Aficio MP 8000SP User Manual

Ricoh Aficio MP 8000SP User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh Aficio MP 8000SP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Network Settings
    21
    1
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[LAN Type] is displayed when optional wireless LAN interface board is in-
    stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
    selected interface takes precedence.
    ❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
    col] and [POP3 / IMAP4 Settings].
    ❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
    Communication Port].
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Settings Required to Use Scan to Folder Function
    This section lists the settings required for sending files.
    Ethernet
    This section lists the settings required for sending files with an Ethernet connec-
    tion.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address Necessary
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkEthernet Speed As required
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    File Transfer Scanner Resend Interval Time As required
    File Transfer Number of Scanner Resends As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    22
    1
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[LAN Type] is displayed when optional wireless LAN interface board is in-
    stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
    selected interface takes precedence.
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for sending files with an IEEE 802.11b
    (wireless LAN) connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
    face board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are
    connected, the selected interface takes precedence.
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address Necessary
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Interface Settings/IEEE 802.11bCommunication Mode Necessary
    Interface Settings/IEEE 802.11bSSID Setting As required
    Interface Settings/IEEE 802.11bChannel As required
    Interface Settings/IEEE 802.11bSecurity Method As required
    Interface Settings/IEEE 802.11bTransmission Speed As required
    File Transfer Scanner Resend Interval Time As required
    File Transfer Number of Scanner Resends As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    23
    1
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Settings Required to Use the Network Delivery Scanner
    This section lists the settings required for delivering data to network.
    Ethernet
    This section lists the settings required for delivering data to network with an
    Ethernet connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[LAN Type] is displayed when optional wireless LAN interface board is in-
    stalled. When both ethernet and wireless LAN (IEEE 802.11b) are connected,
    the selected interface takes precedence.
    ❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkEthernet Speed As required
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    File Transfer Delivery Option As required
    File Transfer Fax RX File Transmission As required
    File Transfer Scanner Resend Interval Time As required
    File Transfer Number of Scanner Resends As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    24
    1
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for delivering data to network with an
    IEEE 802.11b (wireless LAN) connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
    face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
    are connected, the selected interface takes precedence.
    ❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Interface Settings/IEEE 802.11bCommunication Mode Necessary
    Interface Settings/IEEE 802.11bSSID Setting As required
    Interface Settings/IEEE 802.11bChannel As required
    Interface Settings/IEEE 802.11bSecurity Method As required
    Interface Settings/IEEE 802.11bTransmission Speed As required
    File Transfer Delivery Option As required
    File Transfer Fax RX File Transmission As required
    File Transfer Scanner Resend Interval Time As required
    File Transfer Number of Scanner Resends As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    25
    1
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Settings Required to Use Network TWAIN Scanner
    This section lists the settings required for using TWAIN Scanner under the net-
    work environment.
    Ethernet
    This section lists the settings required for using network TWAIN Scanner with
    an Ethernet connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[LAN Type] is displayed when optional wireless LAN interface board is in-
    stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
    the selected interface takes precedence.
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkEthernet Speed As required
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    26
    1
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for using network TWAIN Scanner with
    an IEEE 802.11b (wireless LAN) connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
    face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
    are connected, the selected interface takes precedence.
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Interface Settings/IEEE 802.11bCommunication Mode Necessary
    Interface Settings/IEEE 802.11bSSID Setting As required
    Interface Settings/IEEE 802.11bChannel As required
    Interface Settings/IEEE 802.11bSecurity Method As required
    Interface Settings/IEEE 802.11bTransmission Speed As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    27
    1
    Settings Required to Use Document Server
    This section lists the settings required for using Document Server function under
    the network environment.
    Ethernet
    This section lists the settings required for using Document Server function with
    an Ethernet connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[LAN Type] is displayed when optional wireless LAN interface board is in-
    stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
    the selected interface takes precedence.
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkEthernet Speed As required
    Interface Settings/NetworkLAN Type Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    28
    1
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for using Document Server function with
    an IEEE 802.11b (wireless LAN) connection.
    For details about specifying the settings, see “Interface Settings” and “File
    Transfer”.
    Note
    ❒As to [Effective Protocol], check if the protocol to use is set as [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
    face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
    are connected, the selected interface takes precedence.
    Reference
    p.49 “Interface Settings”
    p.56 “File Transfer”
    Heading Setting Item Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Necessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Necessary
    Interface Settings/NetworkLAN Type As required/Necessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL / TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Interface Settings/IEEE 802.11bCommunication Mode Necessary
    Interface Settings/IEEE 802.11bSSID Setting As required
    Interface Settings/IEEE 802.11bChannel As required
    Interface Settings/IEEE 802.11bSecurity Method As required
    Interface Settings/IEEE 802.11bTransmission Speed As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    29
    1
    Using Utilities to Make Network Settings
    This section describes how to make network settings using utilities.
    You can also specify network settings using utilities such as Web Image Monitor,
    SmartDeviceMonitor for Admin, and telnet.
    Note
    ❒For details about using Web Image Monitor, see “Using Web Image Moni-
    tor”, Network Guide.
    ❒For details about using SmartDeviceMonitor for Admin, see “Using SmartDe-
    viceMonitor for Admin”, Network Guide.
    ❒For Details about using telnet, see “Remote Maintenance”, Network Guide.
    Reference
    “Using Web Image Monitor”, Network Guide
    “Using SmartDeviceMonitor for Admin”, Network Guide
    “Remote Maintenance by telnet”, Network Guide
    Interface Settings
    This section describes how to make Interface settings using utilities.
    Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin,
    and telnet.
    ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [Machine IPv4 Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [IPv4 Gateway Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    30
    1
    ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [IPv6 Stateless Address Autoconfiguration]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server 1] - [DNS Server 3]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DDNS Configuration]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Specify] → [Domain Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [WINS Configuration] → [Primary WINS Server] / [Secondary WINS
    Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh Aficio MP 8000SP User Manual