Ricoh Aficio MP C3000 User Manual

							Stamp
113
3
❖Stamp Color
You can set the selected priority color when printing the date.
Yellow
Red
Cyan
Magenta
Green
Blue
Black
❖Page Numbering Initial Letter
You can select the page numbering initial letter between “P1, P2.../P.1, P.2...”
and “S1, S2.../S.1, S.2...”.
P1, P2.../P.1, P.2...
 S1, S2.../S.1, S.2...
Downloaded From ManualsPrinter.com Manuals 
						

							Copier / Document Server Features
114
3Input/Output
This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The default setting is 5 second(s).
❖Rotate Sort: Auto Paper Continue
Specify to continue copying when paper of the required orientation has run
out during rotatesorting.
On
Copying continues using copy paper of a different orientation. The copy
job will finish even if you have left the machine.
Off
When paper of the required orientation runs out, the machine stops copy-
ing and prompts you to supply copy paper. After you have loaded paper,
the machine will continue copying.
❖Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖Letterhead Setting
If you select [Yes] in this function, the machine rotates the image correctly.
Yes
No
Orientation-fixed (top to bottom) or two-sided paper might not be printed
correctly depending on how the originals and paper are placed.
Downloaded From ManualsPrinter.com Manuals 
						

							Input/Output
115
3
❖Select Stapling Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional 500-sheet finisher, 1000-sheet finisher, or booklet finisher is re-
quired to use this function.
Top Slant/Left
 Bottom Slant/Left
Lett 2
Top 2
Top
Bottom
 Saddle Stitch
Off
❖Select Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional 500-sheet finisher, 1000-sheet finisher, or booklet finisher is re-
quired to use this function.
2 Holes Left
2 Holes top
3 Holes left
3 Holes Top
4 Holes Left
4 Holes Top
Off
Downloaded From ManualsPrinter.com Manuals