Home > Ricoh > Printer > Ricoh Aficio MP C3000 User Manual

Ricoh Aficio MP C3000 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh Aficio MP C3000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Interface Settings
    63
    2
    IEEE 1394
    This section describes the user tools in the IEEE 1394 menu under Interface Set-
    tings.
    [IEEE 1394] is displayed when this machine is installed with the IEEE 1394 inter-
    face board.
    ❖IPv4 Address
    Before using this machine in the network environment, you must specify the
    IPv4 address and subnet mask.
    When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
    as “xxx.xxx.xxx.xxx” (“x” indicates a number).
    If the IEEE 1394 interface board is installed, and you are using the IEEE 1394
    interface, you must set the address of the domain, different from the [IPv4 Ad-
    dress] of [IEEE 1394]. If you to set the address for the same domain, set a dif-
    ferent value for the [Sub-net Mask].
    When you select [Specify], make sure that [Machine IPv4 Address] is different
    from that of another machines on the network.
    The physical address (MAC address) also appears.
    If you use Ethernet and IEEE 1394 (IPv4 over 1394) interfaces at the same time,
    settings must be made carefully.
    Auto-Obtain (DHCP)
    Specify
     Machine IPv4 Address: 011.022.033.044
     Sub-net Mask: 000.000.000.000
    ❖DDNS Configuration
    Specify the DDNS settings.
    Active
    Inactive
    ❖Host Name
     Specify the host name.
    Enter the host name using up to 63 characters.
    ❖Domain Name
    Make settings for the domain name.
    Auto-Obtain (DHCP)
    Specify
    Enter the domain name using up to 63 characters.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							System Settings
    64
    2
    ❖WINS Configuration
    Specify the WINS server settings.
    If [On] is selected, specify the [WINS Server] IPv4 address as “xxx.xxx.xxx.xxx”
    (“xxx” indicates a number).
    If DHCP is in use, specify the [Scope ID].
    Enter [Scope ID] using up to 31 characters.
    On
     Primary WINS Server:000.000.000.000
     Secondary WINS Server:000.000.000.000
    Scope ID
    Off
    ❖IPv4 over 1394
    When you use the IPv4 over 1394 function of the IEEE 1394 interface to con-
    nect the machine to the network, or you print from computer with the IPv4
    over 1394 driver, you must specify [Active] for [IPv4 over 1394].
    Active
    Inactive
    Printing with IPv4 over 1394 is possible under Windows Me/XP and Win-
    dows Server 2003.
    ❖SCSI print (SBP-2)
    When you print using the SCSI print client function supported by Windows
    2000/XP, or Windows Server 2003, you must set [SCSI print (SBP-2)].
    Active
    Inactive
    ❖Bidirectional SCSI print
    Specifies the printers response mode etc. for status requests when using the
    IEEE 1394 interface.
    On
    Off
    If this is set to [Off] bidirectional communication will not work.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Interface Settings
    65
    2
    IEEE 802.11b
    This section describes the user tools in the IEEE 802.11b menu under Interface
    Settings.
    [IEEE 802.11b] is displayed when this machine is installed with the wireless LAN
    interface board.
    Be sure to make all settings simultaneously.
    ❖Communication Mode
    Specifies the communication mode of the wireless LAN.
    802.11 Ad hoc
    Ad hoc
     Infrastructure
    ❖SSID Setting
    Specifies SSID to distinguish the access point in infrastructure mode or 802.11
    ad hoc mode.
    The characters that can be used are ASCII 0x20-0x7e (32 bytes).
    If blank is specified in 802.11b ad hoc mode or ad hoc mode, “ASSID” appears.
    ❖Channel
    Specifies a channel when you select 802.11b ad hoc mode or ad hoc mode.
    The default setting is 11.
    The following channels are available:
    Metric version: 1-14
     Inch version: 1-11
    ❖Security Method
    Specifies the encryption of the IEEE 802.11b (wireless LAN).
    If set to [WEP], always enter WEP key. If set to [WPA], the encryption and au-
    thentication methods.
    Specify “WPA”, when [Communication Mode] is set to [Infrastructure].
    Off
    WEP
    WPA
     WPA Encryption Method
    Select either “TKIP” or “CCMP(AES)”.
     WPA Authent. Method
    Select either “WPA-PSK” or “WPA802.1X)”. If you have selected
    “WPA-PSK”, enter the pre-shared key (PSK) of 8- 63 characters in ASCII
    code.
    ❖Wireless LAN Signal
    When using in infrastructure mode, you can check the machines radio wave
    status using the control panel.
    Radio wave status is displayed when you press [Wireless LAN Signal].
    Downloaded From ManualsPrinter.com Manuals 
    						
    							System Settings
    66
    2
    ❖Transmission Speed
    Specifies the communication speed of the IEEE 802.11b (wireless LAN).
    Auto Select
     11Mbps Fixed
     5.5Mbps Fixed
    2Mbps Fixed
    1Mbps Fixed
    ❖Restore Factory Defaults
    You can return the IEEE 802.11b (wireless LAN) settings to their defaults.
    No
    Yes
    Print List
    You can check items related to the network environment.
    The configuration page shows the current network settings and network infor-
    mation.
    APress [System Settings].
    BPress [Interface Settings].
    CPress [Print List].
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Interface Settings
    67
    2
    DPress the {Start} key.
    The configuration page is printed.
    EPress [Exit].
    FPress the {User Tools/Counter} key.
    Note
    ❒You can also exit by pressing [Exit] on the User Tools main menu.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							System Settings
    68
    2File Transfer
    This section describes the user tools in the File Transfer menu under System Set-
    tings.
    ❖Delivery Option
    Enables or disables sending stored or scanned documents to the ScanRouter
    delivery server.
    On
     Main Delivery Server IPv4 Address 
     Sub Delivery Server IPv4 Address
    Off
    Specify this option when selecting whether or not to use the ScanRouter de-
    livery software. If you do, you will have to preregister I/O devices in the
    ScanRouter delivery software.
    ❖Capture Server IP Address
    Specify the capture server IPv4 address.
    This setting appears when the media link board is installed, and that the cap-
    ture function is being used by the ScanRouter delivery software.
    ❖Fax RX File Transmission
    Specify how to deliver fax files received via the different lines.
     Setting per Line
    Line 1
    Line 2
    Line 3
    E-mail
     IP-Fax
    The lines appear according to the operating environment.
     RX File Delivery
    Specifies whether or not received fax documents are sent to the ScanRouter
    delivery software for each fax line.
     Deliver to Server
    Do not Deliver
    Print at Delivery
    Specify whether or not received fax documents sent to the ScanRouter de-
    livery software should also be printed at the same time.
    Print
    Do not Print
    Downloaded From ManualsPrinter.com Manuals 
    						
    							File Transfer
    69
    2
     File to Deliver
    Specify whether all received fax documents or only received fax docu-
    ments that include delivery codes (ID or SUB/SEP codes) are sent to the
    ScanRouter delivery software.
     File with Delivery Code
    All Files
     Delivery Failure File
    If a received fax document cannot be sent to the ScanRouter delivery soft-
    ware, it is stored in memory. To print a stored file, select [Print File], to de-
    lete, select [Delete File].
    If the machine can send the data to the ScanRouter delivery software, it
    does so automatically. If you delete the data, you will not be able to distrib-
    ute or print it.
    Print File
     Delete File
    ❖SMTP Server
    When using DNS, enter the host name.
    When not using DNS, enter the SMTP server IPv4 address.
    Server Name
     Port No.: 25
    Enter the server name using up to 127 characters. Spaces cannot be entered.
    Enter port number between 1 and 65535 using the number keys, and then
    press the {q} key.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							System Settings
    70
    2
    ❖SMTP Authentication
    Specify SMTP authentication (PLAIN, LOGIN, CRAMMD5, DIGEST-MD5).
    When sending e-mail to an SMTP server, you can enhance the SMTP server
    security level using authentication that requires entering the user name and
    password.
    If the SMTP server requires authentication, set [SMTP Authentication] to [On],
    and then specify the user name, password and encryption.
    Enter the user name and password to be set for the Administrators e-mail ad-
    dress when using Internet Fax.
     SMTP AUTH
    On
    User Name
    Enter the user name using up to 191 characters. Spaces cannot be en-
    tered. Depending on the SMTP server type, “realm” must be specified.
    Add “@” after the user name, as in “user name@realm”.
    E-mail Address
    Password
    Enter the password using up to 63 characters. Spaces cannot be entered.
    Encryption: Auto / On / Off
    [Encryption]-[Auto]: Use If the authentication method is PLAIN, LOGIN,
    CRAM-MD5, or DIGEST-MD5.
    [Encryption]-[On]: Use If the authentication method is CRAMMD5 or DI-
    GEST-MD5.
    [Encryption]-[Off]: Use If the authentication method is PLAIN, or LOGIN.
    Off
    ❖POP before SMTP
    Specify POP authentication (POP before SMTP).
    When sending e-mail to an SMTP server, you can enhance the SMTP server
    security level by connecting to the POP server for authentication.
    To enable POP server authentication before sending e-mail via the SMTP
    server, set [POP before SMTP] to [On]. E-mail is sent to the SMTP server after the
    time specified for [Wait Time after Authent.] has elapsed.
    If you select [On], enter [Server Name] in [POP3/IMAP4 Setting]. Also, check the
    port number for [POP3] in [E-mail Communication Port].
    On
     Wait Time after Authent.: 300msec
    Specify [Wait Time after Authent.] from zero to 10,000 milliseconds, in in-
    crements of one millisecond.
    User Name
    Enter the user name using up to 63 characters. Spaces cannot be entered.
     E-mail Address
     Password
    Enter the password using up to 63 characters. Spaces cannot be entered.
    Off
    Downloaded From ManualsPrinter.com Manuals 
    						
    							File Transfer
    71
    2
    ❖Reception Protocol
    Specify Reception Protocol for receiving Internet Fax.
    POP3
    IMAP4
    SMTP
    ❖POP3 / IMAP4 Settings
    Specify the POP3/IMAP4 server name for receiving Internet faxes.
    The specified POP3/IMAP4 server name is used for [POP before SMTP].
    Server Name
    If DNS is in use, enter the host name.
    If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address.
    Enter POP3/IMAP4 server name using up to 127 characters. Spaces cannot
    be entered.
    Encryption
    Auto
    Password encryption is automatically set according to the POP/IMAP
    server settings.
    On
    Encrypt password.
    Off
    Do not encrypt password.
    ❖Administrators E-mail Address
    On e-mailed scanned documents, if the sender is not specified this appears as
    the senders address.
    When sending e-mail under the Internet fax function, administrators e-mail
    address will appear as the sender’s address under the following conditions:
     The sender has not been specified and the machine’s e-mail address has
    not been registered.
     The specified sender is not registered in the machine’s address book and
    the machine’s e-mail address has not been registered.
    When conducting SMTP authentication for the transmitted files under the In-
    ternet fax function, the Administrators E-mail Address will appear in the
    “From:” box. If you have specified the user name and e-mail address in [SMTP
    Authentication], make sure to specify this setting.
    Enter within up to 128 characters.
    On e-mailed scanned documents, if [Auto Specify Sender Name] is [Off], specify
    the sender.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							System Settings
    72
    2
    ❖E-mail Communication Port
    Specify the port numbers for receiving Internet faxes. The specified POP3
    port number is used for [POP before SMTP].
    POP3: 110
    IMAP4: 143
    SMTP: 25
    Enter a port number between 1 and 65535 using the number keys, and then
    press the {q} key.
    ❖E-mail Reception Interval
    Specify, in minutes, the time interval for receiving Internet faxes via POP3 or
    IMAP4 server.
    On: 15 minute(s)
    Off
    If [On] is selected, the time interval can be specified from 2 to 1440 in incre-
    ments of one minute.
    ❖Max. Reception E-mail Size
    Specify the maximum reception e-mail size for receiving Internet faxes.
    2MB
    Enter a size from one to 50 MB in increments of one megabyte.
    ❖E-mail Storage in Server
    Specify whether or not to store received Internet fax e-mails on the POP3 or
    IMAP4 server.
    Off
    All
    Errors Only
    ❖Default User Name/Password (Send)
    Specify the user name and password required when sending scan file directly
    to a shared folder on a computer running Windows, to an FTP server, or to a
    NetWare server.
     SMB User Name
     SMB Password
    FTP User Name
     FTP Password
    NCP User Name
     NCP Password
    Enter in up to 64 characters.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh Aficio MP C3000 User Manual