Ricoh Caplio R30 User Guide

							149
Installing Software
Installing Acrobat Reader
Acrobat Reader is required to display the operation manual (PDF 
file).
If the computer is running under Windows, Acrobat Reader can be 
installed. 
Acrobat Reader need not be installed if already installed on your 
computer.
Caution
• Do not install the software when the camera is connected to your computer with a USB 
cable.
• For Windows XP or Windows 2000, Administrator privileges are required to install the 
software.
1.Start your computer, and insert the 
included Caplio Software CD-ROM 
into the CD-ROM drive.
The following screen appears 
automatically.
2.Click [Browse CD-ROM].
The files on the CD-ROM are listed.
3.Double-click the [Acrobat] folder.
4.Double-click the [English] folder.
5.Double-click [ar500enu] (ar500enu.exe).
6.Install Acrobat Reader by following the messages 
displayed.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							150
Installing DirectX
DirectX is a program to play a movie file by the ImageMixer.
This camera requires DirectX 8.1 or later to play movie files in 
Windows. If you have an earlier version installed, please install the 
updated version available on the accompanying CD-ROM.
For Windows XP, installation of DirectX is not needed because the 
updated version is already installed.
Caution
• Do not install the software when the camera is connected to your computer with a USB 
cable.
• For Windows XP or Windows 2000, Administrator privileges are required to install the 
software.
1.Start your computer, and insert the included Caplio 
Software CD-ROM into the CD-ROM drive.
2.Click [Browse CD-ROM].
3.Double-click the [DirectX] folder.
4.Double-click the [English] folder.
5.Double-click the following file:
Windows98/98SE/Me [DX81xxx.exe] in the [Win98Me] folder 
Windows2000 [DX81NTxxx.exe] in the [Win2000] folder
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							151
Installing Software
Uninstalling the Software
Caution
• For Windows 2000/XP, Administrator privileges are required to uninstall the software.
• If any other program is active or unsaved data remains, save the data and terminate the 
program before uninstalling.
• If you install both the ImageMixer and the DeskTopBinder Lite and then uninstall either one, 
camera connection to the computer may fail. In this case, uninstall both [Caplio Software] 
and [Caplio Software S] and then install only the required one.
1.Click [Start] on the Windows task bar.
2.Select [Settings]-[Control Panel] ([Control Panel] for XP]).
3.Double-click the [Add/Remove Programs] icon (or the [Add 
Or Remove Programs] icon in Windows XP).
4.Select [Caplio Software] (select [Caplio Software S] if you 
have installed the DeskTopBinder Lite), and then click the 
[Add/Remove] button. 
5.Confirm file deletion and click [OK].
The [Shared File Detected] dialog box appears.
6.Select the [Don’t display this message again.] check box, 
and then click [OK].
The uninstallation process begins. When it is finished, close the displayed 
window.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							152
Uninstalling the ImageMixer
Caution
• For Windows 2000/XP, Administrator privileges are required to uninstall the software.
• If any other program is active or unsaved data remains, save the data and terminate the 
program before uninstalling.
1.Click [Start] on the Windows task bar.
2.Select [Settings]-[Control Panel] ([Control Panel] for XP]).
3.Double-click the [Add/Remove Programs] icon (or the [Add 
Or Remove Programs] icon in Windows XP).
4.Select [ImageMixer] and then click [Change/Remove].
5.Confirm file deletion and click [OK].
6.Select the [Don’t display this message again.] check box, 
and then click [OK].
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							153
Installing Software
Installing the Provided Software (For Macintosh)
You need to install software for transferring images to your computer 
before you can download images from the camera.
Reference
For how to download images from the camera into your computer, see the Software User 
Guide available from the Caplio Software CD-ROM. For how to display the Software User 
Guide, see P.154.
Caution
Be sure to install the software before you connect the 
camera to your computer with the cable.
Software that can be installed from the Caplio Software 
CD-ROM
9: Mac OS 8.6 to Mac OS 9.2.2 X: Mac OS X 10.1.2 to 10.4
SoftwareMacDescription
9X
RICOH Gate LaO- Downloads images.
USB DriverOOConnects the camera to your computer.
MounterOOConnects the camera to your computer.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							154
For Mac OS 8.6 to 9.2.2, double-clicking 
the [Caplio Installer] icon displays the 
screen on the right.
When [Install the Software] is clicked:
The software will be installed.
When [Browse User’s Manual (Software Version)] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-
ROM can be displayed on your computer screen.
If not installed, Acrobat Reader should be installed.
Item NameDescription
Installing the Software Use this button to install software required for handling the camera and 
images.
Browse User’s Manual 
(Software Version)Use this button to display the Software User Guide (PDF).
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							155
Installing Software
System Requirements for Using the 
Provided Software
The following environments are necessary for using the provided 
software.
Please check your computer, or the computer’s user manual.
Caution
• The provided software may not operate properly if changes are made to the operating 
system.
• Connection to a USB port retrofitted using an extended function (PCI bus, etc.) cannot be 
supported.
• If used in conjunction with a hub or other USB devices, the software may not work properly.
Note
• When dealing with movies and other large files, a larger memory environment is 
recommended.
• For Mac OS 8.6 to 9.2.2, use a larger memory environment, as well as allocating extra 
application memory.
• While the software can be operated at 256 colors or more for the Display Color, it is 
strongly recommended that 32,000 or more be used.
Reference
For how to download images to your computer using an SD Memory Card, see the Software 
User Guide.
Operating System Mac OS 8.6 to 9.2.2/Mac OS X 10.1.2 to 10.4
Macintosh A USB port standard-equipped Apple Macintosh Series
Internal Memory Mac OS 8.6 to 9.2.2 96 MB or more (128 MB or more recommended)
Mac OS X 10.1.2 to 10.4 128 MB or more (256 MB or more recommended)
Application Allocated Memory 
(For Mac OS 8.6 to 9.2.2)Without using the compression utility, 16MB or more (24 MB or more is recommended) as 
Application Memory
Hard Disc Drive Capacity Mac OS 8.6 to 9.2.2 10 MB or more (at installation)
Mac OS X 10.1.2 to 10.4 100 MB or more (at installation)
100 MB or more (at operation)
Display resolution 640 × 480 pixels or greater (800 × 600 or greater recommended)
Display colors 256 colors or greater (32000 or greater recommended)
CD-ROM drive A CD-ROM drive compatible with the above-mentioned Macintosh machine
USB port A USB port compatible with the above-mentioned computer body
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							156
Installing the Software on Your Computer
(Mac OS 8.6 to 9.2.2)
1.
Turn on your Macintosh and insert the Caplio Software CD-
ROM in the CD-ROM drive.
2.Select the OS 9 folder.
The [Installer] icon appears.
3.Double-click [Installer].
The “Installer” window opens.
4.Click [Install the Software].
5.Click [OK].
6.Click [Install].
When installation finishes, a message 
appears to inform you that it is 
necessary to restart your Macintosh.
7.Click [Continue].
The software is installed and after a while the Installation Complete 
message appears.
8.Click [Restart].
Your Macintosh restarts.
Note
To remove (uninstall) the software:
To remove (uninstall) the software from your Macintosh, drag the following files to the Trash.
File NameFolder Name
RICOH Gate La System Folder: Control Panels
RICOH Gate La Prefs System Folder: Preferences
Caplio Mounter System Folder: Extensions
Caplio Mounter Prefs System Folder: Preferences
Caplio USB Driver System Folder: Extensions
Caplio Lib System Folder: Extensions
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							157
Installing Software
Installing the Software on Your Computer
(Mac OS X 10.1.2 to 10.4)
1.
Turn on your Macintosh and insert the Caplio CD-ROM in 
the CD-ROM drive.
2.Open the Mac OS X folder.
The [Caplio Mounter.pkg] icon appears.
3.Double-click [Caplio Mounter.pkg].
The Installer starts. A screen appears 
prompting you to enter the 
administrator’s password.
4.Click the key icon.
An authentication window appears.
5.Enter the administrator’s name 
and password, and then click [OK].
6.Click [Continue].
The [Select a Destination] screen 
appears.
Downloaded From camera-usermanual.com Ricoh Manuals 
						

							158
7.Click the destination volume you 
want, and then click [Continue].
8.Click [Install].
When installation finishes, a message 
appears to inform you that it is 
necessary to restart your Macintosh.
9.Click [Continue Installation].
The software is installed, and after a 
while an Installation Complete message 
appears.
10.Click [Restart].
Your Macintosh restarts.
Note
To remove (uninstall) the software:
1. Start [Caplio Mounter] in [Applications] folder.
2. Select [Uninstall] in [File] menu.
The uninstallation process begins.
Downloaded From camera-usermanual.com Ricoh Manuals