Ricoh Projector PJ LW3000ST User Manual

39
 Sharpness
Adjust the sharpness of the image.
Press the ◄ button to decrease the sharpness.
Press the ► button to increase the sharpness.
 Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ button to decrease the amount of saturation in the 
image.
Press the ► button to increase the amount of saturation in the 
image.
 Hue
Adjust the color balance of red and green.
Press the ◄ button to increase the amount of green in the im-
age.
Press the ► button to...

40
Screen
 Aspect Ratio
Auto: Keep the image with original width-height ratio and maxi-
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed 
using a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and 
the height adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to fit the width of the screen 
and the height adjusted to display the image using a 16:10 ratio.
Fill Screen :...

41
 Digital Zoom
Press the ◄ button to reduce the size of an image.
Press the ► button to magnify an image on the projection 
screen.
 V Keystone
Press the ◄ or ► button to adjust image distortion vertically. If 
the image looks trapezoidal, this option can help make the image 
rectangular.
 Ceiling Mount
Front: The image is projected straight on the screen.
Front Ceiling: This is the default selection. When selected, the 
image will turn upside down.
Rear: When selected, the image will appear...

42
Setting
 Language
Choose the multilingual OSD menu. Press the ◄ or ► button 
into the sub menu and then use the ▲ or ▼ button to select your 
preferred language. Press ► on the remote control to finalize the 
selection.
 Menu Location
Choose the menu location on the display screen.
 Closed Caption
Use this function to enable close caption menu. Select an appropri-
ate closed captions option: Off, CC1, CC2, CC3, and CC4.
 VGA Output (Standby)
Choose “On” to enable VGA OUT connection. 
English
User...

43
 VGA-2 (Function)
Input: Choose “Input” to let the VGA port works as a VGA input 
function.
Output: Choose “Output” to enable the VGA Out function once 
the projector is powered on.
 Test Pattern
Display a test pattern.
 Reset
Choose “Yes” to return the parameters on all menus to the factory 
default settings.
English 
English
User Settings
English   

44
Volume
 Speaker
Choose “On” to enable the speaker.
Choose “Off” to disable the speaker.
 Line Out
Choose “On” to enable the line out function.
Choose “Off” to disable the line out function.
 Microphone
Choose “On” to enable the microphone.
Choose “Off” to disable the microphone.
 Mute
Choose “On” to turn mute on.
Choose “Off” to turn mute off.
 Volume
Press the ◄ button to decrease the volume.
Press the ► button to increase the volume.
 Microphone Volume
Press the ◄ button to decrease the...

45
Options
 Logo
Use this function to set the desired startup screen. If changes are 
made they will take effect the next time the projector is powered 
on.
Default: The default startup screen.
User: Use stored picture from “Logo Capture” function.
 Logo Capture
Press ► button to capture an image of the picture currently dis-
played on screen.
 Auto Source
On: The projector will search for other signals if the current input 
signal is lost.
Off: The projector will only search current input...

46
 Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
 LASER Settings
Refer to page 47.
 High Altitude
On: The built-in fans run at high speed. Select this option when 
using the projector at altitudes above 5000 feet/1524 meters or 
higher.
Off: The built-in fans automatically run at a variable speed ac-
cording to the...

47
Options |  
LASER Settings
 LASER Hours Used (Normal)
Display the projection time of normal mode.
 LASER Hours Used (ECO)
Display the projection time of ECO mode.
 LASER Power Mode
Normal: Normal mode.
ECO: Use this function to dim the projector light source which 
will lower power consumption and extend the light source life.
English 
English
User Settings
English   

48
3D
 3D
Auto: When a HDMI 1.4a 3D timing identification signal is de-
tected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
Choose “Off” to disable 3D function.
 3D Invert
If you see a discrete or overlapping image while wearing DLP 3D 
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
 3D Format
Use this feature to select the 3D format. Options are: “Frame 
Packing”, “Side-by-Side (Half)”, “Top and...