Ricoh R10 User Guide
Here you can view all the pages of manual Ricoh R10 User Guide. The Ricoh manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
If you are using the camera for the first time, read this section. 39 1Press the ADJ./OK button toward N (Macro). •N is displayed momentarily at the center of the picture display and then N is displayed at the top of the screen. 2Compose your picture and half-press the shutter release button. 3Full-press the shutter release button. • To cancel macro mode, press the ADJ./OK button toward N again. Note...
Page 42
![Page 42
40
If you are using the camera for the first time, read this section.
•To take a further close-up picture during macro shooting, use [Zoom Macro] in scene
mode. (GP.45)
•The availability of macro shooting for each scene mode is shown below.
Scene ModeMacro Shooting
PortraitDisabled
FaceDisabled
SportsDisabled
LandscapeDisabled
NightscapeDisabled
Night. Port.Disabled
High SensEnabled
Zoom MacroMacro shooting only
Skew Correct ModeEnabled
Text ModeEnabled
Downloaded From camera-usermanual.com Ricoh Manuals](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-41.png "Page 42
40
If you are using the camera for the first time, read this section.
•To take a further close-up picture during macro shooting, use [Zoom Macro] in scene
mode. (GP.45)
•The availability of macro shooting for each scene mode is shown below.
Scene ModeMacro Shooting
PortraitDisabled
FaceDisabled
SportsDisabled
LandscapeDisabled
NightscapeDisabled
Night. Port.Disabled
High SensEnabled
Zoom MacroMacro shooting only
Skew Correct ModeEnabled
Text ModeEnabled
Downloaded From camera-usermanual.com Ricoh Manuals")
40 If you are using the camera for the first time, read this section. •To take a further close-up picture during macro shooting, use [Zoom Macro] in scene mode. (GP.45) •The availability of macro shooting for each scene mode is shown below. Scene ModeMacro Shooting PortraitDisabled FaceDisabled SportsDisabled LandscapeDisabled NightscapeDisabled Night. Port.Disabled High SensEnabled Zoom MacroMacro shooting only Skew Correct ModeEnabled Text ModeEnabled Downloaded From camera-usermanual.com Ricoh Manuals
Page 43
![Page 43
If you are using the camera for the first time, read this section.
41
Flash Range
* When ISO Setting (GP.114) is set to [Auto] or [ISO 400]
Flash Modes
(*)This function is not available in easy shooting mode.
1Press the ADJ./OK
button toward F (flash).
• The list of the flash modes
symbol is displayed on the
picture display.
2Press the ADJ./OK
button ! to select the
flash mode.
• The flash mode symbol is displayed at the upper left of the
picture display.
• The flash mode symbol blinks at the...](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-42.png "Page 43
If you are using the camera for the first time, read this section.
41
Flash Range
* When ISO Setting (GP.114) is set to [Auto] or [ISO 400]
Flash Modes
(*)This function is not available in easy shooting mode.
1Press the ADJ./OK
button toward F (flash).
• The list of the flash modes
symbol is displayed on the
picture display.
2Press the ADJ./OK
button ! to select the
flash mode.
• The flash mode symbol is displayed at the upper left of the
picture display.
• The flash mode symbol blinks at the...")
If you are using the camera for the first time, read this section. 41 Flash Range * When ISO Setting (GP.114) is set to [Auto] or [ISO 400] Flash Modes (*)This function is not available in easy shooting mode. 1Press the ADJ./OK button toward F (flash). • The list of the flash modes symbol is displayed on the picture display. 2Press the ADJ./OK button ! to select the flash mode. • The flash mode symbol is displayed at the upper left of the picture display. • The flash mode symbol blinks at the...
Page 44
42 If you are using the camera for the first time, read this section. Note ---------------------------------------------------------------------------------------------------•The flash mode setting is retained until you press the ADJ./OK button toward F (Flash) again. •The flash does not fire when shooting movies, in multi-shot mode, in auto bracket, in white balance bracket, and in color bracket. •You can adjust the light intensity of the flash. (GP.95). •The auxiliary flash fires to increase the AE...
Page 45
![Page 45
If you are using the camera for the first time, read this section.
43
1Turn the mode dial to EASY.
2Press the shutter release button to
shoot the picture.
Note ---------------------------------------------------------------------------------------------------•The shooting menu can only be used to set [Pic Quality/Size]. For the operating
procedure, see P.83. The other shooting menu items are fixed at their default
settings (GP.213), except for [ISO Setting] which is fixed at [Auto-Hi].
•When the mode...](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-44.png "Page 45
If you are using the camera for the first time, read this section.
43
1Turn the mode dial to EASY.
2Press the shutter release button to
shoot the picture.
Note ---------------------------------------------------------------------------------------------------•The shooting menu can only be used to set [Pic Quality/Size]. For the operating
procedure, see P.83. The other shooting menu items are fixed at their default
settings (GP.213), except for [ISO Setting] which is fixed at [Auto-Hi].
•When the mode...")
If you are using the camera for the first time, read this section. 43 1Turn the mode dial to EASY. 2Press the shutter release button to shoot the picture. Note ---------------------------------------------------------------------------------------------------•The shooting menu can only be used to set [Pic Quality/Size]. For the operating procedure, see P.83. The other shooting menu items are fixed at their default settings (GP.213), except for [ISO Setting] which is fixed at [Auto-Hi]. •When the mode...
Page 46
![Page 46
44
If you are using the camera for the first time, read this section.1Turn the mode dial to MY1 or MY2.
• Turn the mode dial to MY1 to make the
settings for [MY1] in [Reg. My Settings].
• Turn the mode dial to MY2 to make the
settings for [MY2] in [Reg. My Settings].
2Press the shutter release button to shoot the
picture.
Note ---------------------------------------------------------------------------------------------------You can change the camera settings even in my settings mode. Changing the mode...](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-45.png "Page 46
44
If you are using the camera for the first time, read this section.1Turn the mode dial to MY1 or MY2.
• Turn the mode dial to MY1 to make the
settings for [MY1] in [Reg. My Settings].
• Turn the mode dial to MY2 to make the
settings for [MY2] in [Reg. My Settings].
2Press the shutter release button to shoot the
picture.
Note ---------------------------------------------------------------------------------------------------You can change the camera settings even in my settings mode. Changing the mode...")
44 If you are using the camera for the first time, read this section.1Turn the mode dial to MY1 or MY2. • Turn the mode dial to MY1 to make the settings for [MY1] in [Reg. My Settings]. • Turn the mode dial to MY2 to make the settings for [MY2] in [Reg. My Settings]. 2Press the shutter release button to shoot the picture. Note ---------------------------------------------------------------------------------------------------You can change the camera settings even in my settings mode. Changing the mode...
Page 47
If you are using the camera for the first time, read this section. 45 Scene Modes Shooting with Optimal Settings According to Shooting Conditions You can use scene mode to select from among ten still image modes, and shoot with settings automatically optimized for shooting conditions. Portrait Use when taking portrait pictures. Face Automatically recognizes the subject’s face and adjusts the focus, exposure, and white balance. For detailed operations, see P.48. Sports Use when taking pictures of...
Page 48
46 If you are using the camera for the first time, read this section. Note ---------------------------------------------------------------------------------------------------For information on the shooting menu items in scene mode, see P.80. 1Turn the mode dial to SCENE. • The camera is ready to shoot and the selected scene mode is displayed at the top of the picture display. 2Press the MENU button to change the scene mode. • The scene mode selection screen appears. Skew Correct Mode Use to...
Page 49
![Page 49
If you are using the camera for the first time, read this section.
47
3Press the ADJ./OK button
!#$ to select the scene
mode.
4Press the ADJ./OK button.
• The scene mode type is displayed at the top of the picture
display.
5Press the shutter release button to shoot the
picture.
Changing the shooting menu or setup menu setting in scene mode ----------Press the MENU button in shooting mode and then press the ADJ./OK button ! once
or twice to select the [MODE] tab. Now press the ADJ./OK button $ once...](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-48.png "Page 49
If you are using the camera for the first time, read this section.
47
3Press the ADJ./OK button
!#$ to select the scene
mode.
4Press the ADJ./OK button.
• The scene mode type is displayed at the top of the picture
display.
5Press the shutter release button to shoot the
picture.
Changing the shooting menu or setup menu setting in scene mode ----------Press the MENU button in shooting mode and then press the ADJ./OK button ! once
or twice to select the [MODE] tab. Now press the ADJ./OK button $ once...")
If you are using the camera for the first time, read this section. 47 3Press the ADJ./OK button !#$ to select the scene mode. 4Press the ADJ./OK button. • The scene mode type is displayed at the top of the picture display. 5Press the shutter release button to shoot the picture. Changing the shooting menu or setup menu setting in scene mode ----------Press the MENU button in shooting mode and then press the ADJ./OK button ! once or twice to select the [MODE] tab. Now press the ADJ./OK button $ once...
Page 50
![Page 50
48
If you are using the camera for the first time, read this section.
Using Face Recognition Mode
1Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2Press the MENU button.
• The scene mode selection screen appears.
3Press the ADJ./OK button !#$ to select [Face].
4Press the ADJ./OK button.
5Compose your picture.
• When a face is recognized, a frame with the size of the
recognized face is displayed in blue.
• Up to...](http://img.usermanuals.tech/thumb/64/49822/w300_ricoh_r10-user-guide-49.png "Page 50
48
If you are using the camera for the first time, read this section.
Using Face Recognition Mode
1Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2Press the MENU button.
• The scene mode selection screen appears.
3Press the ADJ./OK button !#$ to select [Face].
4Press the ADJ./OK button.
5Compose your picture.
• When a face is recognized, a frame with the size of the
recognized face is displayed in blue.
• Up to...")
48 If you are using the camera for the first time, read this section. Using Face Recognition Mode 1Turn the mode dial to SCENE. • The camera is ready to shoot and the selected scene mode is displayed at the top of the picture display. 2Press the MENU button. • The scene mode selection screen appears. 3Press the ADJ./OK button !#$ to select [Face]. 4Press the ADJ./OK button. 5Compose your picture. • When a face is recognized, a frame with the size of the recognized face is displayed in blue. • Up to...