Runco V 50hd Installation And Operation Manual

							External Control
Vistage™ Series Flat-Panel Display Installation/Operation Manual 67 
PREL
IMINARY
ST60MIN 0x3462 0x3C62 Sets the sleep timer to 60 minutes
ST90MIN 0x3463 0x3C63 Sets the sleep timer to 90 minutes
ST2HRS 0x3464 0x3C64 Sets the sleep timer to 2 hours
ST4HRS 0x3465 0x3C65 Sets the sleep timer to 4 hours
UP 0x3445 0x3C45 Up-Arrow ( )
VID 1 0x344D 0x3C4D Composite video input 1
VID 2 0x3458 0x3C58 Composite video input 2
VID 3 0x3459 0x3C59 Composite video input 3
V-CINE 0x346D 0x3C6D Virtual Cinema aspect ratio
V-WIDE 0x344C 0x3C4C VirtualWide aspect ratio
Table 6-2. RC5 Control Codes for the DHD Controller (continued)
Remote Control 
Button NameRC5 Data 
from 
Remote 
Control 
(Note)RC5 Data 
with Toggle 
Bit = 1 
(Note)Description
Note: These codes assume that the default address of 17 is used. If you change it to something 
other than 17, you will need to modify these codes accordingly. 
 
						

							External Control
68 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PREL
IMINARY
6.3 
Using HDMI CEC 
MessagesThe DHD Controller accepts and can respond to CEC command messages from a disc 
player, satellite receiver or DVR/set-top box via an HDMI connection. Using CEC, the DHD 
Controller can perform the following actions:
 Turn itself and the display device on and select the correct input when the source 
component initiates playback of a disc or recorded program. 
 Turn the source component on when you switch to its corresponding input on the DHD 
Controller. 
 Turn the source component off when the DHD Controller is turned off (unless the 
source component is in playback mode). 
 Change its OSD language when a similar change is made at the source. 
To use CEC, connect your CEC-compatible sources to the HDMI inputs on the 
V-50HD/V-63HD. Set the CEC option to On (refer to CEC on page 54). Additional steps 
may be needed to enable CEC at the source. Refer to the documentation for your source 
device for more information. 
CEC Command ListTable 6-3 lists the CEC commands supported by the DHD Controller. 
➤
Table 6-3. CEC Commands Supported by the DHD Controller
Opcode ValueSupported? (√ = Yes, – = No)
Initiator Follower
Feature Abort 0x00
√√
Standby 0x36
√√
Routing Change 0x80
√√
Routing Information 0x81
√√
Active Source 0x82
√√
Request Active Source 0x85
√√
Device Vendor ID 0x87
√√
Give Device Vendor ID 0x8C
√√
Vendor Command With ID 0xA0
√√
Polling Message N/A
√√
Text View On 0x0D
√
–
Report Physical Address 0x84
√
–
Inactive Source 0x9D
√
–
CEC Version 0x9E
√
–
Set OSD Name 0x47
√
–
Menu Status 0x8E
√
–
Report Power Status 0x90
√
–
Set Menu Language 0x32
–√
 
						

							External Control
Vistage™ Series Flat-Panel Display Installation/Operation Manual 69 
PREL
IMINARY
Give Physical Address 0x83–√
Set Stream Path 0x86
–√
Get CEC Version 0x9F
–√
Abort Message 0xFF
–√
User Control Pressed 0x44
–√
User Control Released 0x45
–√
Give OSD Name 0x46
–√
Menu Request 0x8D
–√
Give Device Power Status 0x8F
–√
The DHD Controller does not transmit HDMI CEC control 
messages from the “HDMI Audio Out” connector. 
Table 6-3. CEC Commands Supported by the DHD Controller (continued)
Opcode ValueSupported? (√ = Yes, – = No)
Initiator Follower
Note
 
						

							External Control
70 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PREL
IMINARY
Notes:
 
						

							Specifications
Vistage™ Series Flat-Panel Display Installation/Operation Manual 71 
PREL
IMINARY
7.1 
V-50HD/V-63HD 
SpecificationsTable 7-1 lists the V-50HD/V-63HD specifications.  
7. Specifications
Table 7-1. V-50HD/V-63HD Specifications
Native Resolution:Full HD 1920 x 1080 (1080p)
Diagonal Size: V-50HD - 50 inches
V-63HD - 63 inches
Aspect Ratios: Refer to Table 7-2
DTV Compatibility:Refer to Table 7-3
Processing: Runco DHD-LS Processor with ViVix IV™ technology and 
BRiC (Backup, Recovery and Clone) tool
Control Options: Serial commands via RS-232
 Discrete infrared (IR) remote
 Consumer Electronics Control (CEC) protocol support via 
HDMI

Inputs: Refer to Table 7-2
Video Standards:NTSC, PAL, SECAM, CEA-861D
Calibration:ISF Certified Calibration Configuration
Contrast Ratio (sequential):1,000,000:1 typical; 10,000:1 minimum
Power Requirements: 100 VAC to 240 VAC +/- 10% @ 50/60Hz
Power Consumption: V-50HD - 400W maximum; 1W standby
V-63HD - 625W maximum; 1W standby 
Operating Temperature: 10°C to 40°C, up to 9,100 feet altitude 
Operating Humidity:20 - 80% humidity (non-condensing)
Dimensions:V-50HD - See Figure 7-1
V-63HD - See Figure 7-2
Weight: V-50HD - 75 lbs. (34.0 kg)
V-63HD - 125 lbs. (56.7 kg)
Regulatory Approvals: FCC Class B, CE, C-Tick
Limited Warranty: Two (2) years parts and labor from the date of shipment from 
Runco. Extended RuncoCare™, Runco Red Carpet™ and 
PremierCare™ plans also available. 
Specifications are subject to change without notice. 
 
						

							Specifications
72 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRELI
MINARY
7.2 
DHD Controller 
SpecificationsTable 7-2 lists the DHD Controller specifications.  
Table 7-2. DHD Controller Specifications
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema, 
Native
Video Standards: HDMI and DVI with HDCP for digital video
 Component and RGB HDTV (1080p, 1080i, 720p)
 Component and RGB EDTV (576p, 480p)
 Component and Composite SDTV (576i, 480i)
 RGB SCART with adaptor
 NTSC (M, 4.43)
 PAL (B, G, H, I, N, M)

Inputs: (4) HDMI with CEC and Deep Color
(1) Component/SCART (3 x RCA)
(2) Component/RGBHV (5 x BNC)
(3) Composite
Outputs: (1) HDMI with Deep Color to V-50HD/V-63HD
(1) HDMI with Deep Color to second display or audio 
processor
Control Options: Discrete infrared (IR) remote
 RS-232 (female DB9) for serial commands
 Consumer Electronics Control (CEC) protocol support via 
HDMI

Ethernet Communication: RJ45 (female) for web server, e-mail, auto firmware upgrade 
and Telnet
RS-232 Communication 
Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Accessory Applications: Runco Firmware Upgrader, Runco BRiC (backup, restore, 
clone), CalMAN by SpectraCal for automatic calibration
Power Requirements: 100-240V~, 47-63Hz, 0.45 Amps
Operating Environment:41°F to 104°F (5°C to 40°C), 0% to 90% humidity
(non-condensing); up to 10,000 feet (3,048 meters) altitude
Dimensions:Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight: 15.4 lbs. (7.00 kg)
Regulatory Approvals:cTUVus, FCC class B, CE, RoHS, China RoHS, WEEE, 
C-Tick, CCC, local conformances as required
Limited Warranty: Two (2) years parts and labor from the date of shipment from 
Runco.
Specifications are subject to change without notice. 
 
						

							Specifications
Vistage™ Series Flat-Panel Display Installation/Operation Manual 73 
PREL
IMINARY
7.3 
V-50HD DimensionsFigure 7-1 shows the V-50HD dimensions. 
Figure 7-1. V-50HD Dimensions (with Optional Speaker Bar)
Speaker Bar
773.2mm30.4in
1257mm49.5in
114.3mm4.5in
432.3mm17.0in
802.7mm31.6in
210.1mm8.3in
773.2mm30.4in
Audio Input
Note: Speaker bar mounts 
to display via mounting 
brackets (x2).
 
						

							Specifications
74 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRELI
MINARY
7.4 
V-63HD Dimensions Figure 7-2 shows the V-63HD dimensions. 
Figure 7-2. V-63HD Dimensions (with Optional Speaker Bar)
935.2mm36.8in
1547.4mm60.9in
1092.5mm43.0in 114.3mm4.5in
208mm8.2in
432.3mm17.0in
802.7mm31.6in
935.2mm36.8in
Note: Speaker bar mounts 
to display via mounting 
brackets (x2). Rubber feet (x4)Audio Input
 
						

							Specifications
Vistage™ Series Flat-Panel Display Installation/Operation Manual 75 
PREL
IMINARY
7.5 
Supported TimingsTable 7-3 lists the signal types supported by each input on the DHD Controller. 
Table 7-3. Supported Signal Timings by Input
Format ResolutionRefresh 
Rate (Hz)Horizontal 
Frequency 
(kHz)Pixel Frequency 
(MHz)Supported? (√ = Yes, – = No)
HD 1
HD 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
SCART
Composite 1
Composite 2
Composite 3
640x480 640x48060.00 31.469 25.175√√√
––
66.59 35.892 29.862√√√
––
72.00 37.861 31.500√√√
––
75.00 37.500 31.500√√√
––
85.00 43.269 36.000√√√
––
800x600 800x60060.00 37.879 40.000√√√
––
72.00 48.077 50.000√√√
––
75.00 46.875 49.500√√√
––
85.00 53.674 56.250√√√
––
832x624 832x624 74.54 52.849 60.036√√√
––
848x480 848x48047.95 25.270 27.089√√√
––
60.00 31.020 33.750√√√
––
1024x768 1024x76860.00 48.363 65.000√√√
––
70.00 56.476 75.000√√√
––
75.00 60.023 78.750√√√
––
85.00 68.677 94.500√√√
––
1152x864 1152x864 75.00 67.500 108.000√√√
––
1280x720 1280x720 47.95 37.833 64.769√√√
––
1280x768 1280x76860.00 47.396 68.250√√√
––
60.00 47.776 79.500√√√
––
75.00 60.289 102.250√√√
––
85.00 68.633 117.500√√√
––
1280x960 1280x96060.00 60.000 108.000√√√
––
85.00 85.938 148.500√√√
––
 
						

							Specifications
76 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRELI
MINARY
1280x1024 1280x102460.00 63.981 108.000√√√
––
75.00 79.976 135.000√√√
––
85.00 91.146 157.500√√√
––
1360x768 1360x768 60.00 47.712 85.500√√√
––
1400x1050 1400x105060.00 64.744 101.000√√√
––
60.00 65.317 121.750√√√
––
75.00 82.278 156.000√√√
––
1600x1200 1600x1200 60.00 75.000 162.000√√√
––
1680x1050 1680x1050 60.00 64.674 119.000√√√
––
1920x1080 1920x1080 47.95 56.821 150.007√√√
––
1920x1200 1920x1200 60.00 74.038 154.000√√√
––
SCART 
RGBS– 50.00 – –
–––√–
480/60i 720x487 59.94 15.734 13.500√√√
––
480/60p 720x483 59.94 31.469 27.000√√√
––
576/50i 720x576 50.00 15.625 14.750√√√
––
576/50p 720x576 50.00 31.250 29.000√√√
––
720/24p 1280x720 23.98/24.0017.982/18.000 59.341/59.400√√√
––
720/25p 1280x720 25.00 18.750 74.250√√√
––
720/30p 1280x720 29.97/30.0022.478/22.500 74.175/74.250√√√
––
720/50p 1280x720 50.00 37.500 75.250√√√
––
720/60p 1280x720 60.00 45.000 74.250√√√
––
1080/50i 1920x1080 50.00 28.125/31.250 74.250/72.000√√√
––
1080/60i 1920x1080 59.94/60.0033.716/33.750 74.175/74.250√√√
––
1080/24p 1920x1080 23.98/24.0026.978/27.000 74.175/74.250√√√
––
1080/50p 1920x1080 50.00 56.250 148.500√√√
––
1080/60p 1920x1080 59.94/60.0067.433/67.500 148.350/148.500√√√
––
NTSC 3.58 – 59.94/60.00 15.734/15.750 3.580
––––√
NTSC 4.43 – 59.94/60.00 15.734/15.750 4.430
––––√
PAL-B/G/H/I – 50.00 15.625 4.430
––––√
Table 7-3. Supported Signal Timings by Input (continued)
Format ResolutionRefresh 
Rate (Hz)Horizontal 
Frequency 
(kHz)Pixel Frequency 
(MHz)Supported? (√ = Yes, – = No)
HD 1
HD 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
SCART
Composite 1
Composite 2
Composite 3