Ryobi Bt31001 Manual

OPERATORS MANUAL
10 in. (254 mm) TABLE SAW
BT3100-1
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your new Table Saw has been engineered and manufactured to Ryobis high standards for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operators manual.
Thank you for buying a Ryobi Table Saw. 

Page 2 
Product Specifications .............................................. 2

Rules for Safe Operation ........................................ 3-6

Electrical ..................................................................... 7

Glossary of Terms For Woodworking ...................... 8

Unpacking and Tools Needed ................................... 9

Loose Parts List .................................................. 10-11

Features ..................................................................

Page 3
IMPORTANT
Servicing  requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the tool to your nearest Ryobi
AUTHORIZED SERVICE CENTER for repair. When servic-
ing, use only identical Ryobi replacement parts.
WARNING:
Do not attempt to use the tool until you have read
thoroughly and understand completely the operator’s
manuals. Pay close attention to the safety rules, including
Dangers, Warnings, and Cautions. If you use...

Page 4 Safe operation of this power tool requires that you read and
understand this operators manual and all labels affixed to
the tool. Safety is a combination of common sense, staying
alert, and knowing how your table saw works.
READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Read the operators
manual carefully. Learn the saws applications and
limitations as well as the specific potential hazards related
to this tool.

GUARD AGAINST ELECTRICAL SHOCK BY
PREVENTING BODY CONTACT WITH GROUNDED
SURFACES. For...

Page 5 
BLADES COAST AFTER TURN OFF.

NEVER USE IN AN EXPLOSIVE ATMOSPHERE.  Normal
sparking of the motor could ignite fumes.

INSPECT TOOL CORDS PERIODICALLY. If damaged,
have repaired by a qualified service technician at an
authorized service facility. The conductor with insulation
having an outer surface that is green with or without yellow
stripes is the equipment-grounding conductor. If repair or
replacement of the electric cord or plug is necessary, do
not connect the equipment-grounding conductor...

Page 6 
CHECK WITH A QUALIFIED ELECTRICIAN or service
personnel if the grounding instructions are not completely
understood or if in doubt as to whether the tool is properly
grounded.

USE ONLY CORRECT ELECTRICAL DEVICES: 3-wire
extension cords that have 3-prong grounding plugs and 3-
pole receptacles that accept the tools plug.

DO NOT MODIFY the plug provided. If it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.

USE ONLY RECOMMENDED ACCESSORIES listed in
this...

Page 7
ELECTRICAL
ELECTRICAL CONNECTION
Your Ryobi Table Saw  is powered by a precision built
electric motor. It should be connected to a power supply
that is 120 volts, 60Hz, AC only (normal household
current). Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the
motor will overheat. If the saw does not operate when
plugged into an outlet, double check the power supply.
GROUNDING INSTRUCTIONS
In the event of a malfunction or breakdown, grounding...

Page 8 Anti-Kickback Pawls (Fingers)
Device which, when properly installed and maintained, is
designed to stop the workpiece from being kicked back
toward the front of the saw during a ripping operation.
Arbor
The shaft on which a blade or cutting tool is mounted.
Bevel Cut
A cutting operation made with an angled blade.
Compound Cut
A cut with both a miter angle and a bevel angle.
Crosscut
A cutting or shaping operation made across the grain of the
workpiece.
Dado
A non-through cut which produces a...

Page 9
The saw is factory set for accurate cutting. After assem-
bling it, check for accuracy. If shipping has influenced the
settings,  refer to specific procedures explained in the opera-
tion and maintenance sections of this manual. Your Model BT3100-1 Table Saw is shipped complete in one
carton and includes two table extensions, a rip fence, a miter
fence with adjusting clamp, a blade guard, rails, and leg
stand.
Separate all parts from packing materials and check each
one with the illustration and...

Page 10
1 2
3 45
6
9
10 12
1314
15
11
8
Fig. 3
Key
No. Description Quan.
1 Rip Scale Indicator .......................................... 1
2 Screw .............................................................. 1
3 Hex Nut ........................................................... 1
4 End Plug ......................................................... 4
5 Rip Fence ........................................................ 1
6 Sliding Miter Table .......................................... 1
7 Accessory...