Ryobi Bt31001 Manual

Page 41
PROBLEM CAUSE SOLUTION
Saw does not make accurate 90 or Positive stops inside cabinet need Adjust positive stops.
45 degree cuts. adjusting (Bevel Cuts).
Miter gage is misaligned Adjust the miter gage.
(Miter Cuts).
Blade adjusting handle is hard to Gears or Screw Post inside cabinet Clean the gears or screw post.
turn. are clogged with sawdust.
Saw does not start. Motor cord or wall cord is not Plug in motor cord or wall cord.
plugged in.
Circuit fuse is blown. Replace circuit fuse.
Circuit...

Page 42
NOTESNOTES 

Page 43
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BT3100-1
FIGURE 58: 10 in. (254 mm) TABLE SAW
FOR MITER TABLE ASSEMBLY,
REFER TO FIGURE 59 FOR RIP FENCE ASSEMBLY,
REFER TO FIGURE 60
FOR BLADE GUARD ASSEMBLY,
REFER TO FIGURE 62 FOR MOTOR ASSEMBLY,
REFER TO FIGURE 61
99
5
868283
523
80
77
71 52
28 26
65
485846
12
9075109
9
89
85
113
4
71
10
84
81
22
43
12164107
66108
57
27 7514 102
60
59 110
122
54
19
66
40
29
51
25
31
24 66
49 42
41 42
7
93
13
1816
17
44
95
20 92
76
96, 100
70 63
8
69 55
68 56 91
94...

Page 44
The model number will be found on the data plate attached to the right side panel of the cabinet, next to the
saw's on board receptacle. Always mention the model number in all correspondence regarding your TABLE
SAW or when ordering repair parts.
1Motor Assembly.......................................... 1
3Spring Shim................................................ 2
4Hex Nut (5/8-18)......................................... 1
5Saw Table................................................... 1...

Page 45
Key
No. Description Quan.Key
No. Description                                        Quan.
 * Item 96 includes parts 42, 78, 100 through 106, and 111.
106 Washer ....................................................... 1
107 Washer....................................................... 1
108 Spacer........................................................ 1
109 Screws ...................................................... 12
110 Hang Tag.................................................... 1
111...

Page 46
19 Washer....................................................... 1
20 Eccentric Screw (10-24)............................. 3
21 Quick Stop.................................................. 1
22 Eccentric Screw (8-32)............................... 1
23 Washer....................................................... 1
24 Hex Nut (Elastic Stop)................................ 1
25 Slide (A)...................................................... 4
26 Hex Nut (Elastic...

Page 47Key
No. Description Quan. Key
No. Description Quan.
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BT3100-1
FIGURE 60: RIP FENCE ASSEMBLY
1Rip Fence................................................... 1
2Screw (10-14 x 1/2 in. Pan Hd.)................. 2
3Fence Roller................................................1
4Roll Pin....................................................... 1
5Screw (10-24 x 1 in. Pan Hd.).................... 1
6Clamper - B................................................ 1...

Page 48
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BT3100-1
FIGURE 61: MOTOR ASSEMBLY
Key
No. Description Quan.
1Arbor........................................................... 1
2Woodruff Key (3/16 in.) .............................. 1
3Ball Bearing (6003)..................................... 1
4Bearing Plate.............................................. 1
5Arbor Pulley................................................ 1
6Retaining Ring............................................ 1
7Ball Bearing...

Page 49
504
7Arm ............................................................. 1
8Cover .......................................................... 1
9Dowel Pin .................................................... 1
10 Riving Knife Assembly ................................ 1
11 Warning Label ............................................ 1
12 Hand Warning Label ................................... 1
Key
No. Description Quan.Key
No. Description Quan.
500 3/32 in. Hex Key...

Page 50
The model number will be found on the data plate attached to the right side panel of the cabinet, next to the saw’s on board receptacle. Always
mention the model number in all correspondence regarding your TABLE SAW or when ordering repair parts.
RYOBI 10 in. (254 mm) TABLE SAW – MODEL NO. BT3100-1
4 3 24
2
32
1
10
3
911
6
12
7
6
FIG. 64
5
8
12 13
128
11
9