Samsung 943snx User Manual

							Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 X 800 49.702 59.810 83.500 -/+
VESA, 1280 X 800 62.795 74.934 106.500 -/+
VESA, 1280 X 960 60.000 60.000 108.000 +/+
VESA, 1280 X 1024 63.981 60.020 108.000 +/+
VESA, 1280 X 1024 79.976 75.025 135.000 +/+
VESA, 1440 X 900 55.935 59.887 106.500 -/+
VESA, 1440 X 900 70.635 74.984 136.750 -/+
VESA, 1600 X 1200 75.000 60.000 162.000 +/+
VESA, 1680 X 1050 65.290 59.954 146.250 -/+
VESA, 1920 X 1080 66.587 59.934 138.500 +/-
Horizontal Frequency
The time to scan one line connecting the right edge
to the left edge of the screen horizontally is called the
Horizontal Cycle and the inverse number of the Hor-
izontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the
same image many times per second to display an
image to the user. The frequency of this repetition is
called the Vertical Frequency or Refresh Rate. Unit:
HzSpecifications 
						

							General
General
Model Name SyncMaster 2243SNX
LCD Panel
Size
21.5 inch (54 cm)
Display area 477.504 mm (H) x 268.596 mm (V)
Pixel Pitch
0.248 mm (H) x 0.248 mm (V)
Synchronization
Horizontal                    31 ~ 80 kHz Vertical
56 ~ 75 Hz
Display Color 16.7M
Resolution
Optimum resolution
1920 x 1080@60 Hz
Maximum resolution 1920 x 1080@60 Hz
Input Signal, Terminated
RGB Analog
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock
164 MHz (Analog)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Signal Cable
15pin - to - 15pin D-sub cable, Detachable
Dimensions (W x H x D) / Weight (Simple Stand)
513.0 x 326.5 x 65.5 mm ( 20.2 x 12.9 x 2.6 inch )(Without Stand)
513.0 x 401.5 x 217.5 mm ( 20.2 x 15.8 x 8.6 inch )(With Stand)/ 4.6\
0 kg (10.1 lbs )
Dimensions (W x H x D) / Weight (HAS Stand)
513.0 x 326.5 x 65.5 mm ( 20.2 x 12.9 x 2.6 inch )(Without Stand)
505.5 x 364 x 200.2 mm ( 19.9 x 14.3 x 7.9 inch )(With Stand)/ 5.15 \
kg ( 11.4 lbs ) Specifications 
						

							Dimensions (W x H x D) / Weight (Dual Hinge Stand)
513.0 x 326.5 x 71.3 mm ( 20.2 x 12.9 x 2.8 inch )(Without Stand)
505.5 x 435.5 x 231 mm ( 19.9 x 17.1 x 9.1 inch )(With Stand)/ 5.65 \
kg ( 12.5 lbs )
VESA Mounting Interface
100 mm x 100 mm
Environmental considerations
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The \
interac-
tion of the monitor and the computer systems will provide the best opera\
ting
conditions and monitor settings. In most cases, the monitor installation\
 will proceed
automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology w\
ith
precision of 1ppm (one millionth) above are used for this product. But\
 the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use i\
t without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product \
are
6,220,800.
 Note
Design and specifications are subject to change without prior notice.  Class B Equipment (Information Communication equipment for residential\
 use)
This product complies with the Electromagnetic Compatibility Directives \
for residential use
and can be used in all areas including common residential areas. (Class\
 B equipment emits
less electromagnetic waves than Class A equipment.)
PowerSaver This monitor has a built-in power management system called PowerSaver. T\
his system saves
energy by switching your monitor to low-power mode when it has not been \
used for a certain
amount of time. The monitor automatically returns to normal operation wh\
en you press a key
on the keyboard. For energy conservation, turn your monitor OFF when it \
is not needed, or
when leaving it unattended for long periods. The PowerSaver system opera\
tes with a VESA
DPM compliant video card installed in your computer. Use the software ut\
ility installed on
your computer to set up this feature. Specifications 
						

							State Normal Opera-
tion Power saving
mode Power off (Power but-
ton) EPA/ENERGY 2000 Power Indicator On Blinking Off
Power Con-
sumption Less than 45 watts
Less than 1 watts Less than 1 watts This monitor is EPA ENERGY STAR
®
 compliant and
ENERGY2000 compliant when used with a computer
equipped with VESA DPM functionality.
As an ENERGY STAR ®
 Partner, SAMSUNG has deter-
mined that this product meets the ENERGY STAR ®
guidelines for energy efficiency. Preset Timing Modes
If the signal transferred from the computer is the same as the following\
 Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differ\
s, the screen may go
blank while the power LED is on. Refer to the video card manual and adju\
sts the screen as
follows.
Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 X 800 49.702 59.810 83.500 -/+
VESA, 1280 X 800 62.795 74.934 106.500 -/+
VESA, 1280 X 960 60.000 60.000 108.000 +/+
VESA, 1280 X 1024 63.981 60.020 108.000 +/+
VESA, 1280 X 1024 79.976 75.025 135.000 +/+
VESA, 1440 X 900 55.935 59.887 106.500 -/+
VESA, 1440 X 900 70.635 74.984 136.750 -/+Specifications 
						

							Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) VESA, 1600 X 1200 75.000 60.000 162.000 +/+
VESA, 1680 X 1050 65.290 59.954 146.250 -/+
VESA, 1920 X 1080 66.587 59.934 138.500 +/-
Horizontal Frequency
The time to scan one line connecting the right edge
to the left edge of the screen horizontally is called the
Horizontal Cycle and the inverse number of the Hor-
izontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the
same image many times per second to display an
image to the user. The frequency of this repetition is
called the Vertical Frequency or Refresh Rate. Unit:
Hz
General
General
Model Name SyncMaster 2243LNX
LCD Panel
Size
21.6 inch (54 cm)
Display area 464.94 mm (H) x 290.58 mm (V)
Pixel Pitch
0.276 mm (H) x 0.276 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color 16.7M
Resolution
Optimum resolution
1680 x 1050@60 Hz
Maximum resolution 1680 x 1050@60 Hz
Input Signal, Terminated
RGB Analog
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V) Specifications 
						

							Maximum Pixel Clock
146 MHz (Analog)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Signal Cable
15pin - to - 15pin D-sub cable, Detachable
Dimensions (W x H x D) / Weight (Simple Stand)
505.5 x 331.5 x 72.0 mm ( 19.9 x 13.1 x 2.8 inch )(Without Stand)
505.5 x 417.2 x 217.5 mm ( 18.5 x 15.5 x 8.6 inch )(With Stand)/ 5.3\
5 kg ( 11.8 lbs )
Dimensions (W x H x D) / Weight (HAS Stand)
505.5 x 331.5 x 67.6 mm ( 19.9 x 13.1 x 2.7 inch )(Without Stand)
505.5 x 375.4 x 200.0 mm ( 19.9 x 14.8 x 7.9 inch )(With Stand)/ 6.3\
5 kg ( 14.0 lbs )
VESA Mounting Interface
100 mm x 100 mm
Environmental considerations
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The \
interac-
tion of the monitor and the computer systems will provide the best opera\
ting
conditions and monitor settings. In most cases, the monitor installation\
 will proceed
automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology w\
ith
precision of 1ppm (one millionth) above are used for this product. But\
 the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use i\
t without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product \
are
5,292,000.
 Note
Design and specifications are subject to change without prior notice. Specifications 
						

							 Class B Equipment (Information Communication equipment for residential\
 use)
This product complies with the Electromagnetic Compatibility Directives \
for residential use
and can be used in all areas including common residential areas. (Class\
 B equipment emits
less electromagnetic waves than Class A equipment.)
PowerSaver This monitor has a built-in power management system called PowerSaver. T\
his system saves
energy by switching your monitor to low-power mode when it has not been \
used for a certain
amount of time. The monitor automatically returns to normal operation wh\
en you press a key
on the keyboard. For energy conservation, turn your monitor OFF when it \
is not needed, or
when leaving it unattended for long periods. The PowerSaver system opera\
tes with a VESA
DPM compliant video card installed in your computer. Use the software ut\
ility installed on
your computer to set up this feature.
State Normal Opera-
tion Power saving
mode Power off (Power but-
ton) EPA/ENERGY 2000 Power Indicator Blue Blue blinking Off
Power Con-
sumption 45 watts
1 watts 1 watts This monitor is EPA ENERGY STAR
®
 compliant and
ENERGY2000 compliant when used with a computer
equipped with VESA DPM functionality.
As an ENERGY STAR ®
 Partner, SAMSUNG has deter-
mined that this product meets the ENERGY STAR ®
guidelines for energy efficiency. Preset Timing Modes
If the signal transferred from the computer is the same as the following\
 Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differ\
s, the screen may go
blank while the power LED is on. Refer to the video card manual and adju\
sts the screen as
follows.
Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+Specifications 
						

							Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 X 960 60.000 60.000 108.000 +/+
VESA, 1280 X 1024 79.976 75.025 135.000 +/+
VESA, 1680 X 1050 64.674 59.883 119.000 +/-
Horizontal Frequency
The time to scan one line connecting the right edge
to the left edge of the screen horizontally is called the
Horizontal Cycle and the inverse number of the Hor-
izontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the
same image many times per second to display an
image to the user. The frequency of this repetition is
called the Vertical Frequency or Refresh Rate. Unit:
Hz
Specifications 
						

							Information
{943SN/943SNX} For Better Display
 Adjust the computer resolution and screen injection rate (refresh rate\
) on the
computer as described below to enjoy the best picture quality. You can h\
ave an
uneven picture quality on screen if the best picture quality is not prov\
ided for TFT-
LCD.
• Resolution: 1360 x 768
• Vertical frequency (refresh rate): 60 Hz  TFT-LCD panels manufactured by using advanced semiconductor technology
with a precision of 1ppm (one millionth) and above is used for this pr\
oduct. But the
pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes o\
r
some of black pixels could be seen. This is not from bad quality and you\
 can use
it without any problems.
• For example, the number of TFT-LCD sub pixels contained in this product \
are
3,133,440.  When cleaning the monitor and the panel outside, please apply the recom\
-
mended small amount of cleaner by using a soft cloth to polish. Do not f\
orce the
LCD area but rub softly.
If excessive force is applied, you may stain it.  If you are not satisfied with the picture quality, you can get better q\
uality of
picture by performing the  Auto Adjustment function in display screen that is
appeared as window termination button is pressed.
If theres still noise after the automatic adjustment, use the  Fine/Coarse adjustment
function.  When viewing a fixed screen for an extended period of time, a residual \
image
or blurriness may appear.
Change the mode to energy save or set a screensaver to move the picture \
when
you need to be away from the monitor for an extended period of time.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one im\
age to another
especially after displaying a stationary image for a long time.
This guide is to demonstrate correct usage of LCD products in order to p\
rotect them from
Image retention.  Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.  What is Image retention ? 
						

							During normal operation of a LCD panel, pixel image retention doesnt oc\
cur. How-
ever, if the same image is displayed for a long time, a slight differenc\
e in electric
charge accumulates between the two electrodes which encase the liquid cr\
ystal.
This may cause the liquid crystal to build up in a certain areas of the \
display. Thus,
the previous image is retained when switching to a new video image. All \
display
products, including LCD, are subject to image retention. This is not a p\
roduct de-
fect.
Please follow the suggestions below to protect your LCD from image reten\
tion.
 Power Off, Screen Saver, or Power Save Mode
Ex)
• Turn the power off when using a stationary pattern. • Turn the power off for 4 hours after 20 hours in use
• Turn the power off for 2 hours after 12 hours in use
• Use a Screen saver if possible • Screen saver in one color or a moving image is recommended.
• Set the Monitor to power off with the PC Display Properties Power Scheme\
.  Suggestions for specific applications
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling S\
ystems We
recommend that you follow set up of your display system program as below\
:  Display Information together with Logo or Moving image cycle.
Ex) Cycle : Display Information for 1 hour followed by a Display Logo o\
r moving
image for 1 minute.  Change the Color Information periodically (Use 2 different colors).
Ex) Rotate the Color Information with 2 colors every 30 minutes. Avoid using a combination of characters and background color with large \
difference
in luminance.
Avoid using Grey colors, which can cause Image retention easily.
• Avoid: Colors with big difference in luminance (Black & White, Grey)
Ex) Information