Samsung Cht 350 Instruction Manual

GB
21
Presetting the Stations Manually☛
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the SETUP button on the remote control.
Result
: The MAIN MENU is displayed.
2
Press the corresponding 
,❷or ➛, ❿buttons to select the
INSTALLATION 
option.
3
Press the ENTER button to select this option.
Result
: The 
INSTALLATION
menu is displayed.
4
Press the corresponding 
or❷buttons, until the  
MANUAL SET 
UP
option is selected.
5
Press the ENTER button to...

GB
23
GB
22
Changing the Preset Station TableYou can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.1
Press the SETUP button on the remote control.
2
Press the corresponding 
,❷or ➛, ❿buttons to select the
INSTALLATION
option.
3
Press the ENTER button to select this option.
Result
: The 
INSTALLATION
menu is displayed.
4
Press the corresponding 
or❷buttons, until the  
MANUAL SET
UP
option is selected.
5
Press the ENTER button...

GB
25
GB
24
Selecting the Colour ModeNICAMNICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound. 
Please refer to page 37.  1
Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2
Press the corresponding 
,❷or ➛, ❿buttons to select the  
USER SET
option.
3
Press the ENTER button to select this option.
Result
:...

GB
27
GB
26
ShowView EXTENDTo prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes. 
➢
Only use if PDC is not available or set to OFF.
1
Press the SETUP button on the remote control.  
2
Press the corresponding 
,❷or ➛, ❿buttons to select the
USER SET
option.
3
Press the ENTER button to select this option.
Result
: The 
USER SET
menu is displayed.
4
Press the corresponding 
or❷buttons, until the 
SHOWVIEW EXTEND
option...

GB
29
GB
28
OSDSelecting the Recording SpeedYour DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and 
Timer functions, which cannot be hidden).1
Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2
Press the corresponding 
,❷or ➛, ❿buttons to select the 
VCR FUNCTION SETUP 
option.
3
Press the ENTER button to select this option.
Result
: The 
VCR...

GB
31
GB
30
Recording a Programme with Automatic StopThis function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive...

GB
33
GB
32
Modifying ShowView ProgrammingIf you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press SETUP a second time to confirm.If you wish to... Then...Select an input source other 
Press the 
➛or ❿buttons, until the 
PRselection flashes.
than the tuner (AV1, AV2 )
Press the INPUT button one or more times to change the 
input source selection.
Result
: The programme number is replaced by:
•The AV1, AV2 source using the...

GB
35
GB
34
Checking a Preset RecordingCancelling a Preset ProgrammeYou can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded1
Press TIMER on the remote control.
Result
: The timer selection is displayed. 
2
Press the ENTER button to select 
STANDARD 
option.
Result
: The  
TIMER PROGRAMMING 
menu is displayed.
3
Press the 
or❷buttons to select the required programme.
4
Press the 
➛or ❿buttons to select and change any...

GB
36
Playing a CassetteAdjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press 
❿ll.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the...

37
GB
Selecting the Audio Output ModePlaying a Cassette in Slow Motion You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available
In tape playback mode.Option DescriptionL Used to listen to the sound on the left Hi-Fi channel.R Used to listen to the sound on the right Hi-Fi channel.MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.MONO Used to listen to the sound on the normal mono channel.L R Used to listen to...