Samsung CLP 610ND User Manual

1.9   
Setup PCL
This menu sets the PCL emulation configuration. 
You can set the font type, symbol type, lines per 
page, and font size.
•Typeface : You can select the standard font to 
be used in PCL emulation. PCL1~PCL7s 
interval between letters is fixed, and 
PCL8~PCL45s interval is proportional to the 
font type and font size.  You can adjust the font 
size of PCL1~PCL7 using the  Pitch item, and 
PCL8~PCL45 can do using  Point Size item. 
PCL8~PCL56s interval and font size are fixed.
• Symbol :...

2.1   
2 Software overview
This chapter gives you an overview of  the software that comes with your 
machine. Further details on how to  use the software are explained in the 
Software section.
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
You must install the machine software using the supplied CD’s after you 
have set up your machine and connected it to your computer. 
Each CD provides you with the following software:
CDContents
Printer...

2.2   
Printer driver (CLP-660 Series)  
Note 
If you want to change the printer language, go to printer 
properties, and change the printer language in Printer tab.  
System requirements
Before you begin, ens ure that your system meets the following 
requirements:
Windows
Your machine supports the follo wing Windows operating systems. 
FeatureWindowsLinuxMacintosh
Printer Languages
SPL, 
PCL5c,  PCL6 (PS)
PSPS
Color mode O O O
Machine quality option O O O
Poster printing O (X) X X
Multiple pages per...

3.1   
3 Getting Started
This chapter gives you step-by-st ep instructions for setting up the 
machine.
This chapter includes:
• Setting up the hardware
• Setting up the network
• Installing the software
• Printers basic settings
Setting up the hardware
This section shows the steps to set up the hardware which is explained 
in the Quick Install Guide. Make sure you read Quick Install Guide and 
complete following steps.
1 Select a stable location. 
Select a level, stable place with  adequate space for...

3.2   
Supported operating systems
The following table shows the network environments supported by the 
machine: 
Configuring network prot ocol via the machine
You can set up TCP/IP Network parameters, follow the steps listed below. 
Note
If you want to setup DHCP network protocol, go to the http://
developer.apple.com/networking/b onjour/download/, select the 
program Bonjour for Windows d ue to your computer operating 
system, and install the program. This program will allow you to 
fix the network...

3.3   
Installing the software
You have to install the machine software for printing. The software 
includes drivers, applications, an d other user friendly programs. 
Note
• The following procedure is for when you use the machine as 
a network machine. If you want to connect a machine with a 
USB cable, refer to the 
Software section.
• The following procedure is based on the Windows XP  operating system. The procedu re and popup window which 
appears during the installation may differ depending on the...

3.4   
Note
•If your machine does not work properly after the 
installation, try to reinstall the printer driver. See 
Software 
section
.
•When the printer driver is in  installation process, the driver 
installer detects the locale information of your operating 
system, and sets the default paper size for your machine. If 
you use the different Windows locale, you must change the 
paper size of your machine for matching your commonly 
used paper size. Go to the printer properties to change the 
paper...

3.5   
Using power saving feature
The machine provides power saving features. When the machine is not 
in use, you can save electricity wit h the provided power save mode. Set 
the specific time the machine goes to the power save mode. 
1 Press  Menu on the control panel until you see  System Setup on 
the bottom line of the display.
2 Press  OK to access  System Setup .
3 Press the left/right arrow until  Power Save displays.
4 Press  OK.
5 Press the left/right arrow to  select the amount of time. 
6...

3.6   
6 From the Windows Start menu, select  Programs > Samsung 
Network Printer Utilities  > SetIP .
7 Select the name of your  printer and click “   ”. 
Note
If you cannot find your printer name click “   ” to refresh the 
list.
8 Enter the network card’s MAC addr ess, IP address, subnet mask, 
default gateway, and then click  Apply.
Note
If you do not know the network  cards MAC address, print the 
machines network information report.
9 Click  OK to confirm the settings.
Click  Exit to close the...

4.1   
4 Selecting and loading print 
media
This chapter introduces you how select and load print media for your 
machine.
This chapter includes:
• Selecting print media
• Loading paper
• Setting the paper size and type
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes, 
and labels. Always use print media that meet the guidelines for use with 
your machine. Print media that does not meet the guidelines outlined in 
this user’s guide may cause the following...