Samsung CLX 8385ND User Manual

1.4   
Rear view 
• The symbol * is a mark for the optional device.
1
Finisher (Stacker & Stapler)*7USB port
2Finisher output tray (Stacker & Stapler)*8Network port
3
Finisher cover (Stacker & Stapler)*9Dummy for FDI (Foreign Device Interface)*
4USB memory port1015-pin Finisher connection (Stacker & Stapler)*
5Extension telephone socket (EXT)*11Power switch
6
Telephone line socket (LINE)*12Power receptacle
Downloaded From ManualsPrinter.com Manuals 

1.5   
Control panel overview
Caution  
When you use the touch screen, use your finger only. Th e screen may be damaged with a sharpen pen or anything else.
1
Machine Setup : Leads you to the machine setup and 
advanced settings. (Page 12.1)8 On Hook Dial : Engages the telephone line.
2
Job Status : Shows the jobs currently running, queued jobs 
or completed jobs.9 Interrupt : Stops a job in process to do an urgent copy job.
3Status: Shows the status of your machine. (Page 1.7)10
Clear All : Reverts the...

1.6   
Introducing the touch screen and useful buttons
Touch screen
The touch screen allows for user-friendl y operation of the machine. Once 
you press the home icon ( ) on the screen, it shows the  Main screen.
•  : Shows Help. You can find the explanation by feature contents. 
• 
Copy: Enters the Copy menu.
• 
Fax: Enters the Fax menu. (Optional)
• 
Documents Box: Enters the Documents Box menu. (Page 13.2)
• 
USB: When USB memory is inserted into the USB memory port on 
your machine, USB icon will...

1.7   
• Job Type: Displays details of the active job, such as job type, recipient 
phone number and other information.
• 
Detail: Shows the detailed informati on of the selected option on the 
Current Job, Completed Job and Active Notice list.
• 
Delete: Removes the selected job from the list.
• 
Delete All: Removes all the jobs from the list.
• 
Close: Closes the job status window and switches to previous view.
Power Saver button 
When the machine is not in use, save electricity with the provided power...

1.8   
Menu map
The control panel provides access to various menus to set up the 
machine or use the machines functions. These menus can be accessed 
by pressing  Machine Setup , Job Status  or touching menus on the 
display screen. Refer to the following diagram. 
Main screen
The  Main  screen is shown on the display screen on the control panel. 
Some menus are grayed out depending on your model . 
CopyFax (Optional)Documents Box
Basic tab (Page 5.1)Original Size
Reduce/Enlarge
Duplex
Output
Original...

2.1   
2 Software overview
This chapter gives you an overview of  the software that comes with your 
machine. Further details how to use the software are explained in the 
Software section .
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
After you have set up your machine and connected it to your computer, 
you must install the printer and scanner software. If you are a Windows 
or Macintosh OS, install the software  from the supplied CD and...

2.2   
Printer driver features
Your printer drivers support the following standard features:
• Paper source selection
• Paper size, orientation and media type
• Number of copies
In addition, you can use various spec ial pri
 nting features. The following 
table shows a general overview of features supported by your printer 
drivers: 
a. Allows you to edit a scanned image in  many ways using a powerful image 
editor and to send the image by email. You can also open another image 
editor program, like...

2.3   
Macintosh
Linux
Operating 
system
Requirement (recommended)
CPURAM
Free 
disk 
space
Mac OS X 10.4 
o
 r lower • Intel Processor
• Power PC G4/ G5
• 128 MB for a 
Power PC 
b

ased Mac 
(512 MB)
• 512 MB for a  Intel-based 
Mac (1 GB) 1 GB
Mac OS X 10.5 • Intel Processor
• 867 MHz or faster 
Power PC G4/ G5 512 MB (1 GB)
1 GB
Mac OS X 10.6 • Intel Processor 1 GB (2 GB
1 GB
ItemRequirement (recommended)
Operating system RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 2~9 (32/64bit)
SuSE...

3.1   
3 Getting Started
This chapter gives you step-by-st ep instructions for setting up the 
machine.
This chapter includes:
• Setting up the hardware
• Setting up the network
• Installing the software
• Using the SetIP program
• Altitude adjustment
• Machines basic settings
• Understanding the keyboard
Setting up the hardware
This section shows the steps to set up the hardware which is explained 
in Quick Install Guide. Make sure you read Quick Install Guide and 
complete following steps.
1 Se
lect a...

3.2   
Setting a Color Standard
When you first turn the machine’s power on, a pop up asking you to set 
the color standard will appear. This is to improve the printouts’ color 
quality. Follow below steps to set the color standard.
1 T
urn the machine’s power on. 
2A po
p up message appears asking you to start  the setting a color 
standard.   
Press  St
art  to start setting a color standard.   
Or press  Ca
 ncel to do it later. 
3 Af
ter a moment a message asking you to print a pattern paper will...