Samsung CLX 8385ND User Manual

5.7   
• Forth Image Position : LEFT, TOP : X-105mm/Y-150mm, RIGHT, 
BOTTOM: X-205mm/Y-230mm
7 Press  OK, the template you have saved will be shown in the 
template list table.
8 Pr
ess   and select Copy.
9 Pre
ss the  Advanced tab  > ID Copy > Mamual ID Copy Setup .
10 Pre
ss the template you have saved from the template list.
11Pre
ss the  Start button on the control panel. now follow the 
instruction on display to finish the ID copy for four images.
          
2-up or 4-up copying (N-up)
The machine...

5.8   
Clone copying
The machine prints multiple original images on a single page. The 
number of images is autom atically determined by the original image and 
the paper size.
1 Pl
ace a single original face down on the scanner glass. (Page  4.1)
Note
The original must be placed on the scanner glass in order to 
use this feature.
2 Pr
ess  Copy from the  Main screen.
3 S
elect the tray in Paper Supply .
4 Pre
ss the  Advanced tab > Clone Copy .
Note
If this option is grayed out, select following options...

5.9   
Cover copying
The machine automatically adds cove rs to your copied set using stock 
taken from a different tray. Covers mu st be the same size and orientation 
as the main body of the job.
1 Pl
ace the originals face up in the DADF. Or place a single original 
face down on the scanner glass. (Page  4.1 )
2 Pr
ess  Copy from the  Main screen.
3 S
elect the tray in Paper Supply .
4 Pre
ss the  Advanced tab > Covers .
NoteOnce you have set the  Paper Supply option to Auto, you 
cannot use this...

5.10   
Overlay copying
If you scan and store the data such as format, you can copy the original 
with the previously stored data. 
1 Pl
ace the originals face up in the DADF. Or place a single original 
face down on the scanner glass. (Page  4.1 )
2 Pr
ess  Copy from the  Main screen.
3 S
elect the tray in Paper Supply .
4 Pre
ss the  Advanced tab > Overlay .
5 Pr
ess  List.
6 S
elect a file name.
7Se
lect a overlay option.
•New : Ma
kes the new overlay. Select options for a new overlay and  
enter the...

5.11   
• Small Original Erase : Erases 0.25 (6mm) from the edge of the 
copies. The original must be pl aced on the scanner glass to use 
this feature.
• Hole Punch Erase : Erases hole punch marks from the left edge of 
the copies.
• Book Center and Edge Erase : Erases shadows of a binding or 
book edge from the center and side edges of the copies. This 
feature only applies when you  do copying a book. (Page 5.8)
Note
If you have set the Book Copy option to Off, you cannot use 
Book Center and Edge...

6.1   
6 Faxing (Optional)
This chapter gives you information about using your machine as a fax 
machine. 
This chapter includes:
• Preparing to fax
• Understanding the Fax screen
• Sending a fax
• Receiving a fax
• Adjusting the document settings
• Setting up a fax phonebook
• Using the polling option
• Using Mailbox
• Printing a report after sending a fax
• Sending a fax in toll save time
• Adding documents to a reserved delay fax job
• Forwarding a received fax to other destination
• Setting up the...

6.2   
Check  Notify me on delivery , when the fax delivered to the recipients 
successfully. 
7 Click  Send.
Note
For more information about   Samsung Network PC Fax, click 
Help .
Checking a sent fax list
You can check a sent fax list on your computer.
From the 
Start menu, click  Programs or All Programs  > Samsung 
Printers > Network PC Fax  > Fax Journal. Then, the Fax Journal  
appears with the fax list you have sent.
Understanding the Fax screen
To use the fax feature, press  Fax on the  Main...

6.3   
Image tab
• Original Type : Enhances the fax quality based on the type of the 
original document being scanned. (Page 6.8)
• Darkness : Adjusts the level of lightn ess or darkness of the fax. 
(Page 6.8)
• Erase Background : Reduces dark backgrounds or paper patterns 
as in newspaper originals. (Page 6.8)
• Color Mode : Selects whether the user sends the fax in mono or 
color. (Page 6.8)
• Back: Returns to the  Basic tab.
Sending a fax
This part explains how to send a fax, and the special methods...

6.4   
5 When the cursor is blinking in the input line, enter the fax number 
using the number keypad on the control panel. Or use  Address 
Book  on the right side of the screen,  if you have stored frequently 
used fax numbers.
6 T
o add a number, press Add No .
7 Pr
ess  Start on the control panel. The machine starts to scan and 
send a fax to destinations.
Sending a fax manuall y (On Hook Dial)
1Press  Fax from the  Main screen.
2 Pl
ace the originals face up into the DADF. 
3A
djust the document...

6.5   
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not 
be present.
1 Pr
ess  Fax from the  Main screen.
2 Pl
ace the originals face up in the DADF.
3A
djust the document settings in the  Image tab and the  Basic tab.
4 Pre
ss the  Advanced tab > Delay Send .
5 Pr
ess  On.
6 En
ter  Job Name  using the keyboard on the display, select  Start 
Time  with left/right arrows.
• If you do not enter  J
 ob Name, the machine assigns the job name 
as Fax Send...