Samsung Dcs 400si System Administration And Special Features Guide
Have a look at the manual Samsung Dcs 400si System Administration And Special Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
202. Dial the station number (e.g., 205) OR[205] SPEED DIAL
press UP or DOWN to select the station0
0 :
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial[205] SPEED DIAL
bins, this display will be shown and a newSPDBLK NOT EXIST
station may be selected
4. Dial the location number (e.g., 05) OR[205] SPEED DIAL
press UP or DOWN to select the location05: _
and press the right soft key to move the
cursor OR press the left...](http://img.usermanuals.tech/thumb/66/85492/w64_samsung-dcs-400si-system-admin-and-special-features-guide_d-13.png "Page 14
202. Dial the station number (e.g., 205) OR[205] SPEED DIAL
press UP or DOWN to select the station0
0 :
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial[205] SPEED DIAL
bins, this display will be shown and a newSPDBLK NOT EXIST
station may be selected
4. Dial the location number (e.g., 05) OR[205] SPEED DIAL
press UP or DOWN to select the location05: _
and press the right soft key to move the
cursor OR press the left...")
![Page 15
5. Enter the name using the procedure in[205] SPEED NAME
Program Station Names
and press the01:SAM SMITH
right soft key to return to step 2 OR
press the left soft key to return to step 3
6. Press the F key to access
Program
Personal Speed Dial Numbers for
Other Stations
OR press TRSF to
store and exit programming OR press
SPK to store and advance to the
next program
2223
CREATE PROGRAMMED STATION
MESSAGESThe programmed station message feature lets you set a message at your phone
to notify users with...](http://img.usermanuals.tech/thumb/66/85492/w64_samsung-dcs-400si-system-admin-and-special-features-guide_d-14.png "Page 15
5. Enter the name using the procedure in[205] SPEED NAME
Program Station Names
and press the01:SAM SMITH
right soft key to return to step 2 OR
press the left soft key to return to step 3
6. Press the F key to access
Program
Personal Speed Dial Numbers for
Other Stations
OR press TRSF to
store and exit programming OR press
SPK to store and advance to the
next program
2223
CREATE PROGRAMMED STATION
MESSAGESThe programmed station message feature lets you set a message at your phone
to notify users with...")
![Page 16
24SET ALARM/APPOINTMENT
REMINDER WITH MESSAGEKeyset users can set their own alarms but standard telephone users cannot.
The system administrator can set alarm/appointment reminders for other sta-
tions in the system.
PROGRAM KEYS
UP & DOWN - Scroll through extensions.
HOLD - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 116 [20
1]ALM REM(1)
Display showsHHMM: NOTSET
2. Dial the station number...](http://img.usermanuals.tech/thumb/66/85492/w64_samsung-dcs-400si-system-admin-and-special-features-guide_d-15.png "Page 16
24SET ALARM/APPOINTMENT
REMINDER WITH MESSAGEKeyset users can set their own alarms but standard telephone users cannot.
The system administrator can set alarm/appointment reminders for other sta-
tions in the system.
PROGRAM KEYS
UP & DOWN - Scroll through extensions.
HOLD - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 116 [20
1]ALM REM(1)
Display showsHHMM: NOTSET
2. Dial the station number...")
![Page 19
30ADDING
NAMES
TO
THE TRANSLATION
TABLE
This program allows the system administrator or technician to associate a CID
or ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 1500 entries with each entry comprised of a
ten digit telephone number and a 16 digit name.
Names are written using the keypad. Each...](http://img.usermanuals.tech/thumb/66/85492/w64_samsung-dcs-400si-system-admin-and-special-features-guide_d-18.png "Page 19
30ADDING
NAMES
TO
THE TRANSLATION
TABLE
This program allows the system administrator or technician to associate a CID
or ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 1500 entries with each entry comprised of a
ten digit telephone number and a 16 digit name.
Names are written using the keypad. Each...")
ACTIONDISPLAY 1. Press TRSF 315 SET RELOCATION Display showsEXT _ EXT 2. Enter first station number (e.g., 202)SET RELOCATION Press RIGHT soft key to move cursorEXT 202 EXT _ 3. Enter second station number (e.g., 210)SET RELOCATION Press RIGHT soft key to enter dataEXT 202 EXT 210 4. Display will return to STEP 1 SET RELOCATION Go to STEP 2 EXT _ EXT OR press TRSF to store and exit programming. 34 35 SYSTEM MAINTENANCE ALARMSThe DCS 400si is provided with software that self-checks for any failures. If a failure does occur in the DCS 400si software or hardware, a fault error will be generated and buffered to an alarm report. During an alarm state every phone with an assigned SYSTEM ALARM button will ring and cause the SYSTEM ALARM button to flash amber. A phone with a display should be used so that the alarm information can be viewed. When an alarm occurs, the user can press the SYSTEM ALARM button to view and scroll through the alarms. This will silence the audible part of the alarm, but the SYSTEM ALARM button will con- tinue to flash until your Service Company views and clears the alarms in the alarm report located in the system software.
NOTES SYSTEM ACCESS CODES The DCS 400si telephone system has preset (default) feature access codes that use the following number plan. These codes can be used if a key is not available for the feature you want to use. Standard telephone users must al- ways dial these codes.0 Call attendant or system operator 55 + 3 Page internal zone 3 10 + xxx Retrieve parked calls 55 + 4 Page internal zone 4 11 Put calls on and take calls off hold 55 + 5 Page external zone 1 12 + xxx Retrieve calls on hold at another stn 55 + 6 Page external zone 2 13 Door lock release 55 + 7 Page external zone 3 16 + xxx Make speed dial calls 55 + 8 Page external zone 4 17 Save number and redial it 55 + 9 Page all external zones 18 Recall dial tone for new call 55 + ✱All Page 19 Last number redial 56 Meet Me Answer 2xx or 2xxxExtension numbers 57 Alarm sensor clear 3xx or 3xxxExtension numbers 58 DISA alarm clear 400 Cancel Do Not Disturb 59 Walking class of service 401 Set Do Not Disturb 600Cancel all call forwarding 41 Set Message No Ring601 + xxxSet Forward All Calls 42 + xxx Cancel message602 + xxx Set Forward Busy 43 Set/return messages 603 + xxx Set Forward No Ans 44 Busy station/line callback604 + xxxSet Fwd Busy/No Ans 45 Busy station camp-on 605 + xxx Set Fwd Follow Me 46 Set up a conference 607 + xxx Set Fwd DND 47 Enter account code 65 Directed call pickup 48 Set programmed station message 66 Group call pickup 49 Send flash to outside line 67 Universal Answer 500 or 5000 Station hunt groups 681 Dial by Voice to 682 Dial by Voice Record 549 or 5049 Station hunt groups7xx or 7xxxIndividual line numbers 55 + 0 Page all internal zones 8xx Trunk groups 55 + 1 Page internal zone 1 9 Trunk group 9 (Local) 55 + 2 Page internal zone 2