Samsung Digimax Pro815 User Manual

							¡¶141¡·
13. A window will be displayed as shown alongside.
Click the [INSTALL] button.
- If you click the [Manual] button instructions,
instructions for using Digimax reader will be
displayed.
- Click the [EXIT] button and the Digimax reader
installation will be cancelled and a window for
restarting the computer will appear.
14. A window will open. Click the [Next >] button.
[Click !]
15. The Software License Agreement window will be
displayed. If you agree to this, click [Yes],
the window will then move to the next step.
If you disagree, click [No] and the installation
program will be cancelled. 12. Digimax Master installation is successfully completed.
Click the [Finish] button to install Digimax Reader.
* The screen shot of step 12 can be different from the
illustration depending on the system requirements.
[Click !]
[Click !]
[Click !]
Setting up the application software
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶142¡·
16. A destination selection window will open.
Click the [Next >] button.
To copy the files to another folder, click
[Browse...] and choose a folder you want.
17. Digimax Reader Installation is completed.
The system will not reboot even if the [Yes, I
want to restart the computer now] option is
selected.
¡ØThe screen shot of step 17 can be different
from the illustration depending on the system
requirements.
18. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and
then click the [OK] button. 
19. After restarting the computer, connect the PC to the camera with the USB cable.
20. Turn the camera power on.
The [Found New Hardware Wizard] will open and 
the computer will recognise the camera.
* If your OS is Windows XP, an image viewer
program will open.
If the download window of Digmax Master opens
after starting Digimax Master, the camera driver was
setup successfully.
[Click !]
[Click !]
[Click !]
Setting up the application software
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶143¡·
¡ÜIf you have installed the camera driver, The [Found New Hardware Wizard] may not open.
¡ÜOn a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify USB
Driver in the CD supplied. (for Windows 98 and 98 SE).
¡ÜBefore connecting the camera to the PC, You should first install the camera driver.
¡ÜAfter installing the camera driver, you have to restart your PC.
¡ÜIf you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
¡ÜShould the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.147), and re-install the driver.
2. Refer to FAQ (p.160) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
21. If you can see [Removable Disk] under [My computer],
the camera driver installation was successful.
Now you can transfer image files from the camera to
PC via the USB cable.
Setting up the application software
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶144¡·
¦UIf you connect the USB cable to a USB port on your PC and then turn on the power,
the camera will automatically switch to computer connection mode.
¦UIn this mode, you can download stored images to your PC through the USB cable.
¦UThe LCD monitor is always turned off in PC mode.
¦UThe Card in use lamp will blink when the files are transferring via the USB connection.
¡áConnecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Press the Menu button and select the [        ] menu tab.
4. Press the Right button and select the [USB] menu by
pressing the Up/ Down button.
5. Press the Right button and select a desired sub menu 
by pressing the Up/ Down button.
6. Select the [Computer] menu and press the OK button.
7. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera
USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
¡ÜThe camera driver must be installed before using PC mode.
¡ÜTo save battery power, it is recommended that you use an AC adapter (Optional) when
connecting the camera to a computer.
INFORMATION
¡áDisconnecting the camera and PC : Refer to page 150 (Removing the removable disk). ¡Ø
If you selected [Printer] in Step 6, when you
connect the camera to your computer, the
[Connecting Printer] message will be displayed
on the LCD monitor and the connection will not
be established. In this case, disconnect the
USB cable, and then follow the procedure
from Step 3 and onward.
Video Out
Quick View
Auto Rotating
USBReset All
File
Power OffComputerPrinter
Starting PC mode
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶145¡·
3. Select an image and press the right mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files. ¡áDownloading stored images
You can download the still images stored on the camera to your PCs hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable Disk
¡æDCIM ¡æ100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
Starting PC mode
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶146¡·
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Master], you can see the stored images in the memory directly on the
PC monitor and you can copy or move the image files.
Starting PC mode
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶147¡·
¡áTo remove the USB driver, refer to the process shown below.
1. Click [Start ¡æSettings] and click [Control Panel].
4. Click the [OK] button.
The camera is removed from the system. 2. Double-click [System].
3. Select [Device manager ¡æHard Disk Controller ¡æ
Samsung Digital Camera] and click the [Remove]
button.
[Click !]
Removing the USB Driver for Windows 98SE
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶148¡·
5. Trace [Start ¡æSettings ¡æControl Panel] and
double click [Add/Remove programs].
6. The [Add/Remove Programs Properties] window
will open. Click [Pro 815] and click the
[Add/Remove] button.
7. Uninstallation is complete. Click the [Finish] button
and the window will disappear.
[Click !]
[Click !]
Removing the USB Driver for Windows 98SE
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶149¡·
¡áTo use this camera as a Removable Disk, install (p.138) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My Computer] or [Windows Explorer].
3. 
Image files stored in the Removable Disk (DCIM ¡æ100SSCAM) can be transferred to the PC.
Important information whilst using the Removable Disk
¡ÜThe [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
¡ÜWe recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
¡ÜWhen uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
¡ÜWhen you upload a file that is not taken by this camera to the Removable Disk, the [File
Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is
displayed in THUMBNAIL mode.
¡Ü
The Card in use lamp will blink, when a file is
transferred (copy or deletion) between the PC and 
the camera. Do not remove the USB cable until the
lamp stops blinking. To remove the USB cable in
Windows 2000/ME/XP, use the [Unplug or Eject
Hardware] icon on the task bar.
INFORMATION
Removable Disk
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶150¡·
[Click !]
[Double-click!]
[Click !]
¡áWindows 98/98SE
1. Check whether the camera and PC is transferring a file. If the Card in use lamp blinks, you
have to wait until the lamp is turned off.
2. Unplug the USB cable.
¡áWindows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC is transferring a file. If the Card in use lamp blinks, you
have to wait until the lamp is turned off.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage
Device] and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage
Device] and click the [OK] button.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Click !]
Removing the removable disk
Downloaded From camera-usermanual.com Samsung Manuals