Samsung Digimax U CA501 User Manual

							91
Setting up the application software
If you select [Exit] at the step 3, the application program installation will be cancelled.
INFORMATION 
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
INFORMATION 
3. A window for which you can select application
software will be displayed. Select the
application program and click the [Install]
button. 
Refer to page 89 for more information about
the application program.
4. Install Digimax Viewer. 
Click [Next >] button.
5. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step. 
If you disagree, click [No] and the installation
program will be canceled.
6. A destination selection window will open. 
Click [Next >]. To copy to the files to another
folder, click [Browse..] and choose a folder
you want.
[Click!]
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							92
Setting up the application software
8. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression. The system will not reboot
even the [Yes, I want to restart the computer
now] option is selected.
* The frame 8 may not appear according to the
system requirements.
9. The PhotoImpression installation window will
be displayed as shown alongside. Click the
[OK] button.
If you select [Cancel] at step 9, a window for installing Digimax Reader will be displayed.
INFORMATION
10. A Welcome window will be displayed. 
Click the [Next >] button.
[Click!]
7. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. If you want to add the
program icons to a different folder, choose
another folder, and then click [Next >] button.
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							93
Setting up the application software
12. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
13. The [Select Components] window will appear.
Click [Next >] button.
14. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button. If you want to add the
program icons to a different folder, choose
another folder, and then click [Next >] button.
[Click!]
11. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step. 
If you disagree, click [No] and the installation
program will be canceled.
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							94
[Click!]
15. PhotoImpression installation is successfully
completed. Click the [Finish] button to install
Digimax Reader. 
* The system will not reboot even the [Yes, I
want to restart the computer now] option is
selected.
* The frame 15 may not appear according to
the system requirements.
Setting up the application software
16. Digimax Reader installation window will be displayed as shown alongside. 
Click the [INSTALL] button. 
- Check the [MANUAL] button. Instructions for
using Digimax reader will be displayed.
- Click the [EXIT] button and Digimax reader
installation will be canceled and the Restart
window will appear. 
17. A window will open. Click the [Next(N)>]
button. 
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							95
Setting up the application software
18. The Software License Agreement window will
be displayed. If you agree to this, click [Yes],
the window will then move to the next step. 
If you disagree, click [No] and the installation
program will be canceled.
19. A destination selection window will open. 
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder you
want.
20. Installation is complete. To apply changes, you
must restart the computer. Select [Yes, I want
to restart my computer now], and then click
[OK].
* The frame 20 may be displayed according to the
system requirements. Click the [Finish] button to
restart the computer.
[Click!]
[Click!]
[Click!]
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							96
Setting up the application software
21. After restarting the computer, connect the PC to the camera with the USB cable.
22. Turn the camera power on. [Found New
Hardware Wizard] will open and the computer will
recognise the camera.
* If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open. If the image viewer
program opens, the camera driver was setup
successfully.
23. If you can see [Removable Disk] under [My
computer], the camera driver installation was
successful. Now you can transfer image files
from the camera to PC via the USB cable.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							97
Setting up the application software
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify USB
Driver in the CD supplied. 
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.101), and re-install the driver.
2. Refer to FAQ (p.109) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							98
Starting PC Mode
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to computer connection mode.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The camera status lamp will blinks when the files are transferring via the USB connection.
Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. In any mode other than Voice Recording mode, press
the MENU button.
4. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
5. Select the [USB] menu by pressing the UP/ DOWN
button and press the RIGHT button.
6. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
7. Press the menu button twice and the menu will disappear.
8. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
The camera driver must be installed before using PC mode.
When you connect the camera to a computer, you have to use the USB cable supplied
with the camera, or the computer cant recognize the camera.
INFORMATION
Disconnecting the camera and PC : Refer to page 103 (Removing the removable disk).
If you selected [PRINTER] in Step 6, when
you connect the camera to your computer,
the [CONNECTING...] message will be
displayed on the LCD monitor and the
connection will not be established. In this
case, disconnect the USB cable, and then
follow the procedure from Step 3 and
onward.
2048
SETUPIMPRINT
SOUND
USBCOMPUTER
PRINTER
SET:OK
BACK:
Downloaded From camera-usermanual.com Samsung Manuals 
						

							99
Starting PC Mode
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
Downloading stored images
You can download the still images stored on the camera to your PCs hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable Disk
DCIM 100SSCAM].
The image files will then be displayed.
5. Click a folder where you want to paste the file.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							100
Starting PC Mode
6. Press the right mouse button and a pop-up menu
will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
Downloaded From camera-usermanual.com Samsung Manuals