Home > Samsung > Digital Camera > Samsung Digimax U CA501 User Manual

Samsung Digimax U CA501 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Digimax U CA501 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Identification of features
    Voice recording modeA movie clip can be recorded for as long as the available
    recording time of the memory capacity allows.
    Image size and type are listed below.
    - Image size : 640X480, 320X240 (user selectable)
    - Movie clip file type : *. avi(MJPEG)
    A voice recording can be recorded for as long as the
    available recording time of the memory capacity allows.
    (Max: 1 hour)
    - File type : *.wav
    Movie clip mode
    You can select the desired working mode by using the mode switch located on the top of the
    camera. This digital camera has 3 recording modes. These are listed below.
    Battery holder
    Memory card slot
    Battery chamber
    Battery chamber cover
    FLASH/
    LEFT button 
    MENU/ OK
    button
    MACRO/ DOWN button
    PLAY&PAUSE button
    SELF-TIMER/
    RIGHT button
    Voice memo/ UP button
    Side/ 5-function button
    Mode switch
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							12
    Identification of features
    Still image mode
    You can select from AUTO(         ), PROGRAM(        ) or
    SCENE mode. 
    In SCENE mode, you can select the NIGHT, PORTRAIT,
    LANDSCAPE, TEXT RECOGNITION and FIREWORKS
    scene menu.
    Self-timer lamp
    Icon Status Description
    For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
    For the first 7 seconds, the lamp blinks at 1 second intervals.
    For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.
    A picture will be taken after about 10 seconds and 2 seconds later a
    second picture will be taken. 
    Camera Status Lamp
    Function Description
    The lamp turns on and off when the camera is ready to take a
    picture
    The lamp blinks while saving the image data and turns off
    when the camera is ready to take a picture
    While movie recording The lamp blinks at a 1-second interval
    While voice recording The lamp blinks at a 1-second interval
    When the USB cable is insertedThe lamp lights up (LCD monitor turns off)
    Transmitting Data  The lamp blinks (LCD monitor turns off)
    Mode icons
    MODE MOVIE CLIPVOICE RECORDINGAUTO PROGRAM PLAY
    Icon
    NIGHT PORTRAIT LANDSCAPE TEXT FIREWORKS
    IconMODESCENE
    Blinking
    Blinking Blinking
    Power on
    After taking a picture
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							13
    Connecting to a Power Source
    Important information about battery usage
    When the camera is not used, turn off the camera power.
    Do not recharge the non rechargeable batteries. It may cause an explosion.
    Please remove the batteries if the camera will not be used for long periods. 
    Batteries can lose power over time and are prone to leaking if kept inside the camera.
    Low temperatures (below 0°C) can affect the performance of the batteries and you may
    experience reduced battery life.
    Batteries will usually recover at normal temperatures. 
    During extended use of the camera, the camera body may become warm.
    This is perfectly normal.
    INFORMATION 
    We recommend using batteries for a digital camera (Within a year from the date of
    manufacture). The batteries are listed below.
    Non rechargeable batteries : CP1
    Rechargeable batteries : SLB-1137
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							14
    Connecting to a Power Source
    Using the batteries
    Battery status Battery indicator
    The batteries are fully
    chargedPrepare new batteriesThere is no battery capacity.
    Replace with new batteries.
    There are 3 indicators for battery condition that are displayed on the LCD monitor.
    Removing the battery
    1. Turn off the camera power. Open the battery chamber
    cover and move the battery holder aside. The battery will
    be released.
    2. Take out the battery and close the battery chamber cover. : 
    If the camera does not turn on after you have inserted batteries, please
    check whether the batteries are inserted with the correct polarity(+/-).
    1. Open the battery chamber
    cover by pushing in the
    direction of the arrow.2. Insert the batteries taking
    note of the polarity (+ / -).3. To close the battery
    chamber cover, push it
    until it clicks.
    When the battery chamber cover is opened, do not press the battery chamber cover by
    force. This may cause the battery chamber cover modification or breakage. 
    INFORMATION 
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							15
    Instructions on how to use the memory card
    Be sure to format the memory card (see p. 72) if you are using a newly purchased memory
    for the first time, if it contains data that the camera cannot recognize, or if it contains images
    captured with a different camera.
    Turn off the camera power whenever the memory card is being inserted or removed.
    Repeated use of the memory card will eventually reduce the memory card’s performance.
    Should this be the case, you will need to purchase a new memory card. 
    Wear and tear on the memory card is not covered by the Samsung warranty.
    The memory card is an electronic precision device. 
    Do not bend, drop or subject the memory card to any heavy impact.
    Do not store the memory card in an environment with strong electronic or magnetic fields,
    e.g. near loud speakers or TV receivers.
    Please do not use or store in an environment where there are extremes in temperature.
    Do not allow the memory card to become dirty or to come into contact with any liquid. 
    Should this happen, clean the memory card with a soft cloth.
    Please keep the memory card in its case when not in use.
    During and after periods of extended use, you may notice that the memory card is warm. 
    This is perfectly normal.
    Do not use a memory card that is used in another digital camera or memory card reader.
    Do not use a memory card formatted by another digital camera or memory card reader.
    Maintenance of the memory card
    Preserving the memory card data
    If the memory card is subjected to any of the following, the recorded data may become
    corrupted :
    - When the memory card is used incorrectly.
    - If the power is switched off or the memory card is removed while recording, deleting
    (formatting) or reading.
    Samsung cannot be held responsible for lost data.
    It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
    disks, CD etc.
    If there is insufficient memory available : If you press the shutter button for the shot, a 
    [CARD FULL !] message will appear and the camera will not operate. To optimize the
    amount of memory in the camera, replace the memory card or delete unnecessary images
    stored on the memory.
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							16
    Instructions on how to use the memory card
    Don’t remove the memory card when the camera status lamp(Green) is blinking as this
    may cause damage to data in the memory card.
    INFORMATION 
    [ SD(Secure Digital) memory card ]
    Write
    protect
    switch
    Label
    Card
    pins
    The camera can use SD Memory Cards and MMC (Multi Media Card).
    The SD memory card has a write protect switch
    that prevents image files from being deleted or
    formatted. By sliding the switch to the bottom of
    the SD memory card, the data will be protected.
    By sliding the switch to the top of the SD
    memory card, the data protection will be
    canceled. Slide the switch to the top of the SD
    memory card before taking a picture.
    As this camera has a 16MB internal memory, you do not need to insert the memory card. To
    expand memory capacity, insert a memory card.  If the memory card is not inserted, an
    image will be stored in the internal memory. 
    When using a 16MB internal memory, the specified shooting capacity will be as follows.
    These figures are approximate as image capacities can be affected by variables such as
    subject matter.
    SUPER FINE FINENORMAL15FPS 24FPS
    2560x1920 9 18 29 - -
    2048x1536 10 24 38 - -
    1600X1200 16 36 58 - -
    1024X768 36 67 117 - -
    640X480 72 121 214 - -
    640X480 - - -35SEC 20SEC
    320X240 - - -1MIN 25SEC 44SEC
    STILL 
    IMAGE 
    Recorded image size
    MOVIE
    CLIP 
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							17
    Inserting the memory card
    1. Turn the power off using the power button.
    Open the battery chamber cover and press the memory
    card as shown in the image and release.
    2. Remove the memory card and close the battery chamber
    cover. 3. To close, push the battery chamber cover until you hear a
    click. If the memory card does not slide in smoothly, do not
    attempt to insert it by force. Check the direction of insertion,
    and then insert it correctly. Do not insert the memory card
    the wrong way round. Doing so may damage the memory
    card slot. 2. Have the front of the memory card facing toward the front
    ofthe camera (lens) and the card pins toward the back of the
    camera (LCD monitor), and then push the memory card into
    the card slot until you hear a click. 1. Turn off the camera’s power and pull the battery chamber
    cover in the direction of the arrow to open.
    Removing the memory card
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							18
    LCD monitor indicator
    No. Description  Icons Page
    1 Battery p.14
    2 Recording modep.11~12,p.36
    3 Continuous shot p.39
    4 Flash p.27
    5 Self-timer p.28
    6 Macro p.25
    7 Metering p.39
    8  Card inserted indicator
    9  Auto focus frame
    10  Camera shake warning p.27
    11  Date/ Time   2004/10/01  01:00 PM p.73 ~ 74
    12 Exposure compensationLTp.29, p.32
    13 White Balance p.30
    14 ISO p.31
    The LCD monitor displays information about the shooting functions and selections.
    [ Image & Full Status ]
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							19
    LCD monitor indicator
    15 Sharpness p.42
    16 Image quality p.38
    17  Image size 2560, 2048, 1600, 1024, 640 p.37
    Number of available shots remaining18
    Remaining time ( Movie clip/ Voice recording)00:01:25 / 00:24:52 p.19~21 
    19  Digital zoom rate X5.0 p.23
    20  Digital zoom bar
    21 Voice memo p.24
    Starting the recording mode
    If the memory card is inserted in the camera, all the camera functions apply only to the
    memory card.
    If the memory card is not inserted in the camera, all the camera functions apply only to the
    internal memory.
    Recording a Movie clip
    1. Insert the batteries (p.14). Insert the batteries taking note
    of the polarity (+ / -).
    2. 
    Insert the memory card. (p.17) As this camera has a
    16MB internal memory, you do not need to insert the
    memory card. If the memory card is not inserted, an image
    will be stored in the internal memory. To expand memory
    capacity, insert a memory card.  If the memory card is
    inserted, an image will be stored on the memory card.
    3. Close the battery chamber cover.
    4. Press the power button to turn on the camera.
    5. Select the MOVIE CLIP(          ) mode by sliding the
    mode switch.
    6. Point the camera towards the subject and compose the
    image by using the LCD monitor.
    7. Press the shutter button to take a movie clip.
    Press the shutter button once and movie clips are recorded for as long as the available
    recording time allows. Movie clips will still be recorded if the shutter button is released. If
    you wish to stop recording, press the shutter button again.
    Image size and type are listed below.
    - Image size : 640X480, 320X240 (Selectable)
    - File type : *. avi(MJPEG)
    [ MOVIE CLIP mode ]
    18
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    							20
    Starting recording mode
    Recording a still image
    Steps from 1-4 are the same as those for recording a
    movie clip.
    5. Select the STILL IMAGE(          ) mode by sliding the
    mode switch.
    6. Point the camera towards the subject and compose the
    image by using the LCD monitor.
    7. Press the shutter button to capture an image.
    Recording Voice
    Steps from 1-4 are the same as those for recording a
    movie clip.
    5. Select the VOICE RECORDING(          ) mode by sliding
    the mode switch.
    6. Press the shutter button to record a voice.
    - Press the shutter button once and voice is recorded for
    as long as the available recording time(Max : 1 hour)
    allows. The recording time will be displayed on the LCD
    monitor.
    - Voice will still be recorded if the shutter button is
    released.
    - If you wish to stop recording, press the shutter button
    again.
    - File type : *.wav
    A distance of 40cm between you and the camera (microphone) is the best distance to
    record sound.
    INFORMATION
    [ VOICE RECORDING mode ]
    [ 
    ]If the auto focus frame turns to red when you press the shutter button down half way, it
    means that the camera cannot focus on the subject. Should this be the case, the camera
    is unable to capture an image clearly.
    INFORMATION
    START:SHUTTER
    Downloaded From camera-usermanual.com Samsung Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Digimax U CA501 User Manual