Samsung Ds 24d Keyset User Guide

TABLE OF CONTENTS
AB
OUT THIS B
OOK
..........................................................
1
THINGS Y
OU SHOULD KNOW
............................
2–5
OUTSIDE CALLSMaking an Outside Call
......................................................................
6
Answering an Outside Call
..................................................................
6
Universal Answer 
........................................................................\
........
6
Recall Dial T
one...

CUSTOMIZING Y
OUR KEYSET
Select Ring T
one
................................................................................
28
Change Y
our P
asscode
....................................................................
28
Set Answer Mode
..............................................................................
28
Automatic Hold
..................................................................................
28
Headset Operation...

ABOUT THIS BOOK
Your DS 24D keyset is the most visible part of your telephone system. 
Please take the time to study this guide and to become familiar with the op-
eration of your keyset. Keep this guide handy. You may need to look up in-
structions for infrequently used features.
Learning to use your keyset correctly will make everyday telephone commu-
nications a breeze.
This book is written based on the factory default settings for the feature
access codes. Sometimes, due to programming requirements,...

3 Your outside calls will light green on your keyset and red on other keysets.
You never lose sight of your calls while they are on hold. They stay right
where you put them and are identified with a green flashing light.
Some simple rules to remember:
 Any steady LED indicates the line or feature is in use.
 A fast flashing green LED indicates a new call ringing in.
 A slow flashing green or red LED indicates a call is on hold.
 A slow flashing amber LED indicates a recall to your keyset....

5
DS 24D KEYSET
4SYSTEM TONESThe system provides several tones to assist you. Some of these tones are\
already familiar to you.Intercom Dial T one—A steady tone that indicates you can begin dialing.DIAL TONE —CONTINUOS
CONTINUOUS
Ringback T one—Indicates the station you dialed is ringing.RINGBACK TONE —
400 ms ON/200 ms OFF/400 ms ON/2000 ms OFF
CONTINUOUS
Busy Tone—Indicates the station you dialed is busy .BUSY TONE—350 ms ON/350 ms OFF
CONTINUOUS
DND/No More Calls T one—Fast busy tone indicates the...

7 NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before dialing.
RECALL DIAL TONEPress the NEWbutton to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the FLASHkey may
be programmed to recall dial tone. SENDING A FLASHWhile on an outside call, press the FLASHkey to send a flash to the tele-
phone company. This is required for some custom calling...

BUSY STATION CALLBACKWhen you call another station and receive a busy signal:
Press the CBKkey or dial 44.
When the busy station becomes free, your keyset will ring. 
Lift the handset or press SPEAKERto call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your CBKkey will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKERkey before dialing.BUSY STATION CAMP-ONWhen you...

If you do not answer this recall within a pre-programmed period of time,
it will go to the system operator.CONSULTATION HOLDWhen you are talking on an outside line and it is necessary to consult with
another extension:
Press the TRANSFERkey; you will receive transfer dial tone. Your call is
placed on transfer hold. 
Dial the extension number.
Consult with the internal party. 
Press TRANSFERto return to the outside party or hang up to transfer
the call.
NOTE: Repeatedly pressing the TRANSFERkey will...

13
TRANSFER TO VOICE MAILThis feature is used to send a call directly to a voice mailbox. Your keyset
must have a correctly programmed VTkey to accomplish this. To transfer a
call directly to a voice mailbox:
While on a call, press the VTkey and dial the mailbox number.
Hang up when dialing is completed.CALL WAITINGIf an outside call has been camped-on to your phone or another station has
camped-on to you:
Your keyset will ring and the call that is waiting for you (camped-on) will
flash green.
Press...

FORWARD NO ANSWERTo forward calls to another station when you do not answer:
Dial 603plus the extension or group number.
Receive confirmation tone and hang up.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKERkey before you begin dialing.FORWARD BUSY/NO ANSWERIf you have both a Forward on Busy destination and a Forward No Answer
destination programmed, you may set both of these at the same time:
Dial 604.
Receive confirmation tone and hang up....