Samsung Ds 616 General Description Manual

AA OPTION BOARD
The AA option board is equipped with a 4-channel built-in AA. There are two dedicated
connectors in the Basic KSU for the option board. The board has its own processor,
68EC000, 64 Kbyte program memory, 512 Kbyte pre-recorded message memory, 1 Mbyte
data and customer message memory and a DSP chip for AA processing.
Only one (1) board can be installed per system.
2.3 TRUNK EXPANSION BOARDS
One slot only is available for trunk expansion purposes.
S3TRK CARD
This card provides three Caller...

2.3
2.4 STATION EQUIPMENT
FIGURE 2–2
DS 24D KEYSET
(See Figure 2–2)
!Built in Speaker Phone
!24 programmable keys with tri-colored
lights
!Four fixed function keys
!32 character display (2 x 16) with three
associated soft keys and a scroll key
!UP/DOWN buttons for digital control of
speaker, handset and ringer volumes
!Eight selectable ring tones
!Desk- or wall-mounted
!Available in Dark Grey Only
FIGURE 2–3
SINGLE LINE TELEPHONE
(See Figure 2–3)
!Four fixed function keys: hold, flash, new
call, and...

Door Phone Interface Module (DPIM) and Door Phone (see Figures 2–4 and 2–5)
!The DPIM adapts any DLI circuit for use with the door phone unit
!Commonly used to request entry through locked doors (interior or exterior) or as a room
monitoring box
!Provides contact control to be used with customer-provided electric door lock
!The maximum number of door phones available is limited to the number of available
DLI ports, not to exceed twelve (12). Note that you should take in consideration the
optional SVM 400...

PART 3. SPECIFICATIONS
The following tables provide technical data for the DS 616 hybrid/key telephone system.
3.1  ELECTRICAL SPECIFICATIONS
AC INPUT 112  (88–132) VAC (48–63 Hz)
POWER CONSUMPTION (MAX) 97 WATTS MAXIMUM FUSE RATING 5 AMP
BTU RATING (MAX) 5.5 BTU/MINUTE
DC OUTPUT +5 VOLTS 2.5 AMPS MAX
-5 VOLTS 0.5 AMPS MAX
-56 VOLTS 1.2 AMPS MAXIMUM
BATTERIES 10–40 AMPS 48 VOLTS
MAXIMUM CHARGE CURRENT 0.4 A
MAXIMUM DISCHARGE RATE 2.5 A
3.2  DIMENSIONS AND WEIGHTS
HEIGHT WIDTH DEPTHWEIGHT
BASIC KSU 18.5...

3.4  CABLE REQUIREMENTS
EQUIPMENTCABLE AWGMAX FEET MAX METERS
DIGITAL KEYSETS 1 PR. TWISTED 241300 400
SINGLE LINE STATION 1 PR. TWISTED 243000 1 KM
DOOR PHONE 2 PR. TWISTED 24330* 100
CTI MODULE 1 PR. TWISTED 241300 400
*This is the maximum length of the cable between the door phone and the DPIM. The
DPIM can be installed up to 250 cable meters from the KSU.
3.5  SYSTEM TONES
TONEFREQUENCIES CADENCE
DIAL TONE 350 + 440 HzCONTINUOUS
RING BACK TONE 440 + 480 Hz 1 sec on + 3 sec off
BUSY TONE 480 + 620 Hz...

3.6  KEYSET KEY LED INDICATIONS
CONDITIONLED COLOR LED ON LED  OFF
LINE IDLE OFF–OFF
LINE IN USE RED/GREENSTEADY–
RECALL AMBER 500 ms 500 ms
CALL ON HOLD RED/GREEN 500 ms 500 ms
RINGING C.O. CALL GREEN 100 ms 100 ms
RINGING INTERNAL CALL GREEN 100 ms 100 ms
DND INDICATION RED 100 ms ON / 100 ms OFF 500 ms
for 500 ms
3.3 

PART 4. FEATURES
SYSTEM FEATURES
Account Code Entry
ForcedVoluntaryAll Call Voice Page
Attention ToneAuthorization CodesForced
VoluntaryAuto Attendant†
Automatic Hold
Background MusicBattery Backup (Memory)Battery Backup (System)
Batteries Not IncludedCaller Identification†
Name/Number Display
Next CallSave CIDStore CID
Inquire Park/HoldCID Review ListInvestigate
Abandon Call List (100)CID on SMDRNumber to Name Translation (200)
Call ForwardingAll CallsBusy
Forward DNDNo AnswerBusy/No Answer
Follow...

4.2
4.1 SYSTEM FEATURE DESCRIPTIONS
ACCOUNT CODE ENTRY
Station users may enter an account code (maximum 12 digits) before hanging up
from a call. This account code will appear in the SMDR printout for that call record.
Keyset users may enter this code using an account (ACCT) key without interrupting
a conversation. Single line telephone users must temporarily interrupt the call by
hook-flashing and dialing the feature access code. Account codes can be up to 12
digits long.
FORCED
When forced, they are...

4.3
VOLUNTARY
Any station user can always enter an authorization code before they begin dialing.
The dialed authorization code is verified from a system list of 30 entries.
AUTO ATTENDANT
The DS AA card for the DS 616 includes four ports of auto attendant for simulta-
neous answering and call processing. Sixteen professionally recorded prompts
inform callers of the progress of their calls. Several examples are the following:
“I’m sorry. There is no answer”, “That station is busy” and “Invalid number....

4.4
CALLER IDENTIFICATION
CALLER ID
Caller ID requires that the SIO2 card be installed in the DS 616 KSU. Caller ID ser-
vice must also be provided by your local telephone company. The availability of
the calling party name or number depends on the type of CID service offered by
your local telephone company. The Caller ID feature is dependent on having an
LCD keyset to show the name or number in the top line of the display.
NAME/NUMBER DISPLAY
Each LCD keyset user can decide if he/she wants to see the...