Samsung Hl-r5078w Dlp Tv Owners Instructions

							Using the D-Net
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 111 
						

							Using the D-Net
English - 112
How to connect compatible IEEE1394 Devices
Connecting compatible IEEE1394 devices is simple using this TV equipped with IEEE1394. 
A secure digital interface is provided to other digital home entertainment units, such as a DTV, 
a Set-Top Box, an AVHDD, a digital VCR, a MPEG Camcorder. 
1
Connect the IEEE1394 
cable from the jack of the 
component with IEEE1394 
capability, such as a 
Set-Top Box or a Digital 
VCR to the IEEE1394 jack 
on the TV.
2
Press the D-Net button on the
Remote Control.
3
Select the D-Net (IEEE1394)
Compatible device. 
NOTES
•To access D-Net (IEEE1394) in the menu, see page 117.
•The IEEE1394 interface is equipped with a copy protection standard called Digital Transmission
Content Protection (DTCP).
•The name of 1394 Jack may be different according to the manufacturer (i.e., DTV LINK or i.LINK).
•The supported video format is MPEG-2 Digital video. Other digital video formats (e.g. DV 
format...) are not supported. 
For audio, Dolby Digital and MPEG Digital Audio are supported, other digital audio formats 
(e.g. MP3, DTS) are not supported. 
•Because IEEE1394 is an evolving technology, it is possible that some or all of the connectivity 
features of a device you connect to the TV through the IEEE1394 port may not operate.
•There may be a single IEEE1394 jack depending on the specifications of the external device.   
•If only a single IEEE1394 jack is supported, connect the cable to the last jack.
What’s D-Net?
This refers to a home network consisting of devices supporting D-Net (IEEE1394) connections 
(such as digital VCRs and Set-Top Boxes) for digital audio and video data.
The D-Net (IEEE1394) standard for the High Performance Serial Bus is a serial data transfer protocol
and interconnection system.
D-Net (IEEE1394) interface is capable of supporting various high-end digital A/V applications,
such as A/V device control and signal routing, Digital Video (DV) editing, home
networking. 
TV Rear Panel
IEEE1394 cable
Digital VCR (D-VHS)
1
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 112 
						

							English - 113
When Connecting D-Net (IEEE1394) Compatible devices
1
The last device in the chain may not be looped back to the TV as the TV may not be able to
work with the other devices.
To connect two or more D-Net (IEEE1394) Compatible devices, follow the diagram below.
A maximum 10 D-Net (IEEE1394)
Compatible devices can be 
connected.
Do not connect D-Net (IEEE1394)
Compatible devices in a way 
that creates a loop.
NOTE
•IEEE1394 cables longer than 14.76 feet (177.16 inches) should not be used between devices.
234 51
IEEE1394
cableIEEE1394
cable
234 5
67
1
IEEE1394
cableIEEE1394
cable
IEEE1394
cable IEEE1394
cableIEEE1394
cable
IEEE1394
cable
IEEE1394
cable
234 51
IEEE1394
cableIEEE1394
cable
IEEE1394
cable IEEE1394
cableIEEE1394
cable
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 113 
						

							Using the D-Net
English - 114
Connection Options
There are two different connection options for connecting D -Net (IEEE1394) compatible devices. 
Select the most suitable option according to your network of audio/video products.
The Direct Device-To-Device Option
D-Net (IEEE1394) permits the chaining of devices, unlike 
analog audio and video connections where each device
needs to be individually connected to the TV. This allows
you to connect your D-VHS to your 1394 Set-Top Box
only, then connect the Set-Top Box to the TV. 
More IEEE1394 devices can be added to the chain as
needed. Each video device can be viewed on the TV’s 
D-Net and information can be sent from any IEEE1394
device to other compatible devices.
The Hub Connection Option
D-Net (IEEE1394) also permits connecting devices using the TV as a hub. Each device is capable of 
sending information, which may include audio and video, to any other device on the network.
DTV STB
Digital VCR
DTV STB Digital VCR 1394 Monitor Other 1394 Device
Digital VCR
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 114 
						

							English - 115
4-Pin and 6-Pin Connectors
Two different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and 
a 6-pin.
The 4-pin connector sends digital audio, digital video and digital
control signals to and from devices. The TV has two available 4-pin
connection jacks, of which two are at the back.
The 6-pin connector also sends digital audio, video and control 
signals, but can also send low voltage electrical power. There are 
no 6 pin connectors on this TV.
It is not possible to directly connect a 6-pin connector to a 4-pin jack,
and vice versa. In order to connect a 6-pin device to a 4-pin device,
an adaptor or adaptor cable is required, easily purchased from an
electronic or computer store.
Connecting a 6-pin device (such as a camcorder) directly to the TV, (if it is designed to receive 
electrical power from another 6-pin device) will require that the camcorder is directly connected to
the AC supply, or that the camcorder’s battery power is used.
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 115 
						

							Using the D-Net
English - 116
Selecting a D-Net device
Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1
Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See “How to connect compatible IEEE1394 Devices” on page 112)
2
Press the D-Net button on the remote control.
3
Select a connected D-Net device by pressing
the …or †button.
4
To select a device, press the ENTER button. 
Then display the D-Net device control panel 
and operate the selected device.
•The device list is in the order of DTV, STB, AVHDD, DVHS, Camcorder and UNCONTROLLABLE.
If there are multiple devices of the same type, the devices will be listed in ascending order of
the manufacturer name with Samsung first as the exception. If there are multiple devices of the
same type and they are manufactured by the same company, they will be listed in the order 
of their serial number.
•The TV and all other devices connected
on the D-Net (IEEE1394) chain appear in
the D-Net device list.
•If “UNCONTROLLABLE” is listed in the
device list, the device is not supported by
the TV, and cannot be controlled with the
TV remote control or the D-Net control
panel on the screen. 
•It is possible to connect a D-Net device to
another device and to the TV while the TV 
is ON. The D-Net device list automatically
adds the newly-connected device to the list. 
See “How to connect compatible IEEE1394
Devices”, page 112 on connecting 
D-Net (IEEE1394) Compatible devices.
•At this time, the screen changes to the 
picture from the selected device.
Copy-free
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 116 
						

							English - 117
Follow the instructions below to activate D-Net in the menu.
1
Press the MENU button. 
Press the ENTER button to select “Input”.
2
Press the …or †button to select 
“D-Net”, then press the ENTER button.
3
Press the …or †button to select a 
D-Net (IEEE1394) connected device. •The TV and all other devices,
connected on the D-Net (IEEE1394)
chain, appear in the D-Net device list.
•This is also available using the D-Net
button on the remote control.
Input
Source List : TV√Edit Name√Anynet
D-Net
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Input
Source List : TV√Edit Name√Anynet
D-Net
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 117 
						

							Using the D-Net
English - 118
The D-Net control panel
Select an IEEE1394 from the D-Net device list. The TV will then display the D-Net control panel. 
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
1
Press the D-Net button on the remote control.
2
Press the …or †button to select a 
D-Net (IEEE1394) connected device. 
Press the ENTER button.
3
Use the …, †, œ, √buttons on the remote 
control to move through the options (see next 
page) available in the D-Net control panel.
4
Press the ENTER button to select an option.
5
To view the IEEE1394 device in FULL SCREEN,
press the EXIT button on the remote control.
•The D-Net control panel appears on the
bottom of the screen.
•To exit D-Net mode, select DTV from the
D-Net device list or press the SOURCE
button on the remote control.
NOTE
•For information about how to use the icons, refer to the following page.
Copy-free
Copy-free
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 118 
						

							English - 119
NOTES
•Press the …, †, œ, √buttons on the remote control to select a control panel button and press the
ENTER button on the remote control.
•Depending on the device being controlled, not all options on the D-Net control panel may be available.
•The selected IEEE1394 device and its functions can be controlled through the equivalent buttons on the
TV’s remote control.
•Not all functions are supported for all IEEE1394 devices.
•It is possible to use direct keys on the remote control (rewind, stop, play/pause, fast forward) to control
external devices.
Control Panel ( )
Button Name To do this
Return
Ta rget
Program List
Move to the previous menu.
Start and stop recording a Digital stream.
Display the AVHDD program list.
Play 
StopPlay the digital stream from the selected digital
device.
Stop the digital stream from the selected digital
device.
Rewind
Forward
Device menu
Power
Go to recording position
Recording
Pause
Fast rewind a digital stream from the selected 
digital device.
Fast forward a digital stream from the selected 
digital device.
Display the EIA-775 OSD receive to connected
1394 device. Display only EIA-775 support device.
Turn the Power of the selected device ON/OFF.
When in time shift mode on AVHDD, this moves
to the recording position.
Display only Camcoder recordings.
Pause Play.
Recording stopDisplay only AVHDD recordings.
*What is EIA-775: EIA-775 is an OSD standard that enables the control of external 1394 devices
using functions such as Play, Stop, etc.
*What is CEA-931: This is a standard for controlling external IEEE1394 devices with the TV
remote control and not the remote control of the external device.
For example, to play DVHS, you press the Play button of the TV instead of the Play button of the
DVHS, the Play command is transmitted to the DVHA through the IEEE1394 connection.
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 119 
						

							Using the D-Net
English - 120
Operating Tips
1) When the screen is switched to the TV program. 
- When you select the first button, the TV button, in the Device List, it switches to the TV program. 
- Although you have selected another device from the Device List, if detecting a video signal from 
the device fails, the “Connection failed” message appears and the screen automatically switches 
to the TV program.
- When the 1394 connection to the selected device is disconnected, the screen automatically
switches to the TV program. If you reconnect the device, the reconnected device is automatically 
selected.
2) AVHDD, DVHS and camcorders automatically stop when you select another device while watching
one of the devices. 
3) Some devices may be displayed in the Device List as ‘UNCONTROLLABLE’.
This may happen when the device does not contain the proper information or it cannot read.
4) Some devices may not be recognized and may be disconnected from the 1394 connection when 
they are turned off. 
5) When connecting another TV, the TV may transmit *Digital TS which appears in the TV or another 
picture (e.g. Only RF may be transmitted, although DVHS is being displayed on the screen) 
depending on the TV specifications.
6) When connected to another STB, some STBs may not be displayed in the Device List due to device
specifications or defects when multiple devices are connected.  
Even if the device is displayed in the Device List, the connection to the device may fail. Otherwise,
due to STB trouble, the video stream may be stopped while recording, or the recording may fail. 
In this case, you have to discover which device is defective by removing the devices one by one.
7) When connected to the AVHDD
- To rotate the AVHDD disc, there may a time delay. 
- Some AVHDDs may provide two playbacks or recordings simultaneously. In this case, there 
may be two Play icons in the Program List and 2 AVHDD buttons in the Target List. 
- If you copy a program from the Program List, the selected AVHDD program is played on the TV 
screen and recorded using the device selected from the Target List.
Even if the program reaches its end, the recording device does not stop automatically. 
- Some AVHDDs may display the wrong program information after recording, depending on the 
situation. 
- If AVHDD is recording, the program is automatically played which is currently being recorded, 
when it is selected from the Device List. (PVR function)
- For the Go to recording position button operation, the difference between recording and play 
time must be longer than 30 seconds.
8) When connected to DVHS
- Some devices support an automatic connect function (I-mode). These devices may cause a 
malfunction when multiple devices are connected. 
- Some DVHS devices may not record properly when multiple devices are connected and the mode
is I-mode.
9) When connected to a camcorder
- Depending on if the camcorder is in Tape or Camera Mode, the control panel changes. 
If the camcorder turns off the power (power saving mode), the camcorder may disappear from 
the Device List.
*What is Digital TS: DTV packages digital data (video, audio and data) into 188 byte units using
the MPEG-2 algorithm and transmits the data unit unlike for analog. It is called Digital Transport
Stream or Digital TS.
BP68-00513A-00Eng(108~125)  6/3/05  3:12 PM  Page 120