Samsung Hl-r5078w Dlp Tv Owners Instructions

							English - 61
My Color Control Custom Settings
Users can adjust the 5 My Color Control colors (Red, Green, Blue, Yellow, and Pink).
1Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2Press the …or †button to
select “My Color Control”,
then press the ENTER button.
3Press the …or †button to
select “Detail Control”, then
press the ENTER button.
4Press the …or †button to
select the desired color and
then press the ENTER or √
button.
5Press the œor √button to
adjust the settings. 
Press the …or †button to
choose other colors.
6
Press the ENTER or MENU
button to confirm the
changes and return to the
previous menu.
Resetting the My Color Control Colors to the Factory Defaults
You can return to the factory default settings for My Color Control
colors.
7Press the MENU button to
display the “Detail Control”
menu.
Press the …or †button to
select “Reset”, then press the
ENTER button.
The previously adjusted My
Color Control colors will be
reset to the factory defaults.
•The original picture
(before adjustment) is
shown on the left side,
while the picture after
adjustment is shown on
the right side, and an
adjustment bar is shown
on the bottom of the
screen.
▲Red▼
Detail Control
MoveReturnAdjust
Adjusted
50
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
My Color Control
Easy Control : Custom√Detail Control√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Detail Control
Red 50
Green 50
Blue 50
Yellow 50
Pink 50
Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Detail Control
Red 50
Green 50
Blue 50
Yellow 50
Pink 50
Reset
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Original
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 61 
						

							Picture Control
English - 62
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Green or Blue color to enhance the picture according to the users 
particular color weakness.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press 
the ENTER button.
2
Press the …or †button to
select “Color Weakness”,
then press the ENTER button.
3
Press the ENTER button to
select “Color Weakness”.
Press the …or †button to
select “On”, then press the
ENTER button.
4
Press the …or †button to
select a color to be adjusted,
then press the ENTER button.
Press the œor √button to
adjust the value of a color
selected.
Press the EXIT button to exit.
0
Color Weakness
AdjustMoveReturn
▲Red▼
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Color Weakness
Color WeaknessRed 0
Green 0
Blue 0
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
OffOn
Color Weakness
Color Weakness: On√Red 0
Green 0
Blue 0
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
•You can also select these
options (Red, Green or
Blue) by pressing the …
or †button.
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 62 
						

							English - 63
Setting the Film Mode
You can automatically sense and process film signals from all sources and adjust the picture for 
optimum quality.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “Film Mode”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
NOTE
•Film mode is supported in 480i only.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Color Control
Film Mode : Off
PIP
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
ListingsOffOn
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 63 
						

							Picture Control
English - 64
Viewing Picture-In-Picture
One of the best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system
allows you to watch two different pictures at once, even if you don’t have a VCR or DVD connected
to your TV.
Activating the PIP
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the ENTER button to
select “PIP”.
Press the …or †button to
select “On”, then press the
ENTER button.
The sub picture appears in
the corner of the screen.
Press the EXIT button to exit.
Alternate method
Press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
NOTES
•This feature doesn’t function when the “V-Chip” is active.
•If you turn the TV off while watching and turn it on again, then the mode will return to normal
video.
•Digital channels cannot be viewed in the PIP window.
•PIP is supported when the video source for the main picture is digital and the source for the 
sub picture is analog.
•PIP is supported even when both the main and the sub pictures are analog.
For more information, refer to the PIP Settings table on page 66.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : Off
Source : TV
Swap
Size
Position
Air/CATV : Cable
Channel : Cable 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
OffOn
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 64 
						

							English - 65
Selecting an External Source
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Source”, then press
the ENTER button.
If you have not connected
any equipment to the TV’s
input jacks, the signal from
these inputs will not appear.
Press the …or †button to
select an external signal,
then press the ENTER button.
Press the EXIT button to exit.
NOTE
•For more information about external signals, see “Viewing an External Signal Source” (See page 42)
and the “PIP Settings” (See page 66). 
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Cable
Channel : CABLE 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
S-Video3Component1▼
TV
S-Video2 S-Video1 AV 3
AV 2 AV 1
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 65 
						

							Picture Control
English - 66
Swapping the Sub (PIP) Picture and Main Picture
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Swap”, then press 
the ENTER button.
The sub picture appears in
the main picture, and vice
versa.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : On√Source : TV√Swap
Size√Position√Air/CATV : Cable√Channel : Cable 3√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
NOTE
•SWAPis not available
when the Main picture
is a Digital broadcast.
PIP Settings
O:PIP and swap operate
▲:PIP operates. Swap does not operate
X:PIP doesn’t operate
SubMain
ATSC  QAM  NTSC  AV1  AV2  AV3   S-Video1 S-Video2  S-Video3Component1 Component2HDMI PC D-Net
X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
O
O
O
O
O
O
O
O
OX
X
O
X
O
O
O
O
O
O
OX
X
O
O
X
O
O
O
O
O
OX
X
O
O
O
X
O
O
O
O
OX
X
O
O
O
O
X
O
O
O
OX
X
O
O
O
O
O
X
O
O
OX
X
O
O
O
O
O
O
X
O
OX
X
O
O
O
O
O
O
O
X
OX
X
O
O
O
O
O
O
O
O
XX
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
X 
X 
X  
X 
X  
X 
X 
X
X▲
▲
▲
▲
▲
▲
▲
▲
▲
X
XATSC
QAM
NTSC
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3 
Component1
Component2
BP68-00513A-00Eng(054~075)  6/3/05  3:08 PM  Page 66 
						

							English - 67
Changing the Size of the Sub (PIP) Picture
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Size”, then press the
ENTER button.
Press the …or †button to
select a size you want, then
press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Cable
Channel : Cable 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 67 
						

							Picture Control
English - 68
Changing the Location of the Sub (PIP) Picture
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Position”, then press
the ENTER button.
Press the …or †button to
select a position you want,
then press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Cable
Channel : CABLE 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
NOTE
•In Double (     ,     ) mode, you cannot set the Position. 
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 68 
						

							English - 69
Selecting a Signal Source (Air or Cable) for PIP
If the PIP source is TV while PIP is On, you can select a different broadcasting source 
for the PIP picture from the main picture.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Air/CATV”, then
press the ENTER button.
4
Press the …or †button to
select “Air” or “Cable”, then
press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
PIP
PIP : On
Source : TV
Size
Position
Air/CATV : Cable
Channel : Cable 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
AirCable
PIP
PIP : On
Source : TV
Size
Position
Air/CATV : Cable
Channel : Cable 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
AirCable
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 69 
						

							Picture Control
English - 70
Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
1
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press the …or †button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the CH  or CH  button under the cover of the remote
control to change the sub picture channels while PIP is on.
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
PIP
PIP : On
Source : TV
Swap
Size
Position
Air/CATV : Cable
Channel : Cable 3
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Listings
▲
▼Cable 11
•Air : “Air” antenna signal
Cable : “Cable” antenna signal
BP68-00513A-00Eng(054~075)  6/3/05  3:09 PM  Page 70