Samsung HL-S6767W Dlp Tv Owners Instructions

							English - 21
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to \
your TV.
Connecting to HDMI (High Definition 
Multimedia Interface)
1
Connect an HDMI cable
between the HDMI IN 2 (or
HDMI IN 1/DVI IN) jack on
the TV and the HDMI OUT jack
on the DVD player.
Connecting to Y, PB, PR
1
To enable Component video
viewing, connect a set of  Component video cables 
between the COMPONENT 
(1 or 2) VIDEO (Y, P
B, PR) IN
jacks on the TV and the 
COMPONENT (Y/P
B/PRor
Y/C
B/CR) OUT jacks on the
DVD player.
2
Connect a set of audio cables
between the  COMPONENT (1 or 2) AUDIO (L, R)
IN jacks on  the TV and the AUDIO OUT jacks on
the DVD player. 
NOTE
• Please be sure to match the
color coded input terminals
and cable jacks.
DVD Player
TV Rear Panel
Incoming
Cable or 
Antenna
1
DVD Player
TV Rear Panel
Incoming
Cable or 
Antenna
1
2
BP68-00588G-01Eng(016~027)  5/12/06  5:56 PM  Page 21 
						

							Connections
English - 22
Connecting to Audio and Video Jacks
1
Connect a video cable 
between the VIDEO IN (1
or 2) jack on the TV and the
VIDEO OUT jack on the 
DVD player.
2
Connect a set of audio
cables between the AUDIO
IN (1 or 2) jacks on the TV
and the AUDIO OUT jacks
on the DVD player.
NOTES 
•Component Video separates
the video into Y(Luminance
(Brightness)), P
B(Blue) and PR
(Red) for enhanced video
quality.
•Please be sure to match the
color coded input terminals
and cable jacks.
TV Rear Panel
DVD Player
Incoming
Cable or 
Antenna
1
2
BP68-00588G-00Eng(016~027)  4/22/06  4:02 PM  Page 22 
						

							English - 23
Connecting a DTV Set-Top Box
Connecting to Y, PB, PR
1
Connect a set of Component
cables between the 
COMPONENT (1 or 2) VIDEO
(Y, P
B, PR) IN jacks on the TV 
and VIDEO (Y/P
B/PRor 
Y/C
B/CR) OUT jacks on the 
Set-Top Box.
2
Connect a set of audio cables
between the COMPONENT (1 
or 2) AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT 
jacks on the Set-Top Box.
NOTE
•Please be sure to match the
color coded input terminals
and cable jacks.
Connecting to DVI (Digital Visual Interface)
1
Connect an HDMI/DVI cable
between the HDMI IN 1/DVI
IN jack on the TV and the DVI
OUT jack on the Set-Top Box.
2
Connect a set of audio cables
between the DVI AUDIO (L, R)
IN jacks on the TV and the
AUDIO OUT jacks on the 
Set-Top Box.
NOTES
•Requires a Cable Converter.
•Make sure the HDMI/DVI source’s
power is on, or you will be unable to
select it in the TV menus source list.
•The HDMI IN 1/DVI IN jack
is not  compatible with PC.
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or 
Antenna
12
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or 
Antenna
1
2
BP68-00588G-00Eng(016~027)  4/22/06  4:02 PM  Page 23 
						

							Connections
English - 24
Connecting a VCR and DTV Set-Top Box
1
Connect the Video or S-Video/
Audio cables between the 
VIDEO or S-VIDEO/AUDIO 
input jacks on the TV and 
VIDEO or S-VIDEO/AUDIO 
output jacks on the VCR.
2
Connect the Video/Audio
cables between the VIDEO 
or S-VIDEO/AUDIO input
jacks on the TV and VIDEO 
or S-VIDEO/AUDIO output 
jacks on the Set-Top Box.
3
Connect a video cable
between the VIDEO OUT 
jack on the TV and the 
VIDEO input jack on the 
VCR.
4
Connect a set of audio
cables between the AUDIO 
OUT jacks on the TV and 
the AUDIO input jacks on 
the VCR.
5
Use the coaxial cable to 
connect between the splitter 
and the ANT 1 IN (CABLE) 
on the TV and between the 
splitter and the ANT IN on 
the Set-Top Box.
Connecting to HDMI (High Definition 
Multimedia Interface)
1
Connect an HDMI cable
between the HDMI IN 2 (or
HDMI IN 1/DVI IN) jack on
the TV and the HDMI OUT jack
on the Set-Top Box.
NOTE
•Please be sure to match the
color coded input terminals
and cable jacks.
TV Rear Panel
DTV Set-Top Box Stereo VCR Incoming Cable
or Antenna
1
3
4
5
2
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or 
Antenna
1
or
TV Rear PanelStereo VCR
BP68-00588G-01Eng(016~027)  5/12/06  5:57 PM  Page 24 
						

							English - 25
Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your audio 
system owner’s manual.
1
If your audio system has an
optical digital audio input,
connect to the “DIGITAL
AUDIO OUT(OPTICAL)” jack
on the TV.
NOTE
•OPTICAL: converts the electric
signal into an optical light 
signal, and transmits it through
glass fibers. 
•When a Digital audio system is
connected to the Digital Audio
Out (Optical) terminal:
Decrease the gain (volume) of
the TV, and adjust the volume
level with the audio systems
volume control.
TV Rear Panel
1
Audio System
When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted.
RF
AV
S-Video
Component
PC
HDMIInternal
Mute OffInternal
Mute On Internal Speakers
Internal
Mute OffInternal
Mute On Audio Out (Optical, L/R Out)
Video Output
Active
ActiveActive
ActiveActive
ActiveActive
Inactive Inactive
Inactive
BP68-00588G-01Eng(016~027)  5/8/06  5:52 PM  Page 25 
						

							Connections
English - 26
Connecting to an Analog Amplifier
1
The “AV OUT (AUDIO L/R)”
jacks cannot be used for external speakers. 
Y ou must hook them up to an
amplifier.
When an audio amplifier is 
connected to the “AV OUT 
(AUDIO L/R)” jacks: 
Decrease the gain (volume) 
of the TV, and adjust the
volume level with the volume
control on your audio
amplifier.
NOTES
• If using the HDMI/DVI, PC, or
Component input on the TV, the
audio output signal is available
only when the TV’s Internal Mute
is set to on.   
(Refer to page 76)
• Please be sure to match the
color coded input terminals
and cable jacks.
TV Rear Panel
Amplifier
1
BP68-00588G-01Eng(016~027)  5/12/06  5:57 PM  Page 26 
						

							Operation
BP68-00588G-00Eng(016~027)  4/22/06  4:02 PM  Page 27 
						

							Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the  (power) button on the front panel.
Dynamic Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the
…/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can
also view the on-screen menu system and make some adjustments using the TV’s sidepanel buttons.
English - 28
Operation
Viewing the Menus
1
Press the MENU button.
The main menu will appear
at the bottom of the screen.
There are six menu groups:
“Input”, “Picture”, “Sound”,
“Channel”, “Setup”, and
“Menu Map”.
2
Press the œor √button, then press
the ENTER button to select an item
you want in the menu.
Press the …/†/œ/√/ENTER button
to display, change, or use the 
selected items.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the
remote control. 
The TV displays the current 
channel, the status of certain 
picture, sound settings and 
the current time.
The information displayed varies
according to the selected source.
Picture
Enter
Picture
Mode√Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
Enter
Selects the input options.
No Time InformationCable
3
BP68-00588G-01Eng(028~055)  5/12/06  5:57 PM  Page 28 
						

							English - 29
Navigating Menus by Using the Menu Map
Using the Menu Map of the main menu enables you to view all menus and select a function quickly. 
You can select any menu by using the menu map.
1
Press the MENU button.
The main menu will appear at the bottom of the screen.
2
Press the œor √button to select “Menu Map”, then press the
ENTER button. The menu map will appear.
3
Press the …or †button to select a menu, then press the
ENTER button. The selected menu will appear.
4
Press the …/†/œ/√/ENTER buttons to display, change, or
use the selected items.
Press the EXIT button to exit. •Red button: Displays menus in alphabetical order.
•Green button: Moves to the previous page.
•Yellow button: Moves to the next page.
•Blue button: Exits from the menu. 
•ENTER button: Moves to the selected menu.
BP68-00588G-00Eng(028~055)  4/22/06  2:02 PM  Page 29 
						

							English - 30
Operation
Selecting a Menu Language
When you start using your television for the first time, you must select the language which will
be used for displaying menus and indications.
1
Press the MENU button.
Press the œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“Language”, then press the ENTER
button.
3
Press the …or †button to select
“English”, “Español” or “Français”,
then press the ENTER button. 
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
Medium
Off
English
Español
FrançaisReturn
BP68-00588G-00Eng(028~055)  4/22/06  2:02 PM  Page 30