Samsung Ht Bd7200 User Manual

31
ENG

●  BASIC FUNCTIONS
This section introduces basic playback functions and playback by disc type.
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the Blu-ray Home Cinema is connected to).
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a NUMBER button. 
(This screen will...

Basic functions of your Blu-ray Home Cinema
3

ON-SCREEN MENU NAVIGATION
Playing a Disc
Load a disc.
Place a disc gently into the tray with the disc’s label facing up.
Close the compartment by pressing the PLAy button.
Playback starts automatically.
When you stop disc play, the player remembers where you stopped, so when you press 
PLAY button again, it will pick up where you left off. This is called the "Resume" function. 
With some Blu-ray discs(BD-J), this function may not work.
Press...

33
ENG

●  BASIC FUNCTIONS

sETTing THE sOUnD
setting the Power On / Off Melody sound 
A Melody sound can be set so it is heard each time you turn the player on or off.
With the unit in Stop mode, press the MENU button.
Press the $% buttons to select Setup, then press the 
ENTER or + button.
Press the $% buttons to select System Setup, then 
press the ENTER or + button.
Press the $% buttons to select Power On/Off sound, 
then press the ENTER or + button.
Press the $% buttons to select On or Off, then...

Basic functions of your Blu-ray Home Cinema
3
slOW MOTiOn Play/sTEP MOTiOn Play
slow Motion Play                                              hgfZCV
In pause or step mode, press the SLOW button on the remote control for Slow Motion play.
If you press the SLOW button, * 1/8 * 1/4 * 1/2
To return to normal speed playback, press the PLAY () button.
This () icon indicates an invalid button press.
 No sound is heard during slow mode. 
 Slow motion operates only in the forward direction.
step Motion Play...

35
eng

  SySteM Setup

Setting the CloCK
Choose your time zone
With the unit in Stop mode, press the Menu button.
Press the  buttons to select Setup, then press the 
enteR or  button.
Press the  buttons to select System Setup, then press 
the enteR or  button.
Press the  buttons to select time Zone, then press the 
enteR or  button.
Use the   button to place the cursor to the appropriate 
time zone for your area and press the enteR button.
To set the time automatically, set the NTP server to On (see...

Language setup
36
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically 
every time you watch a movie.
If you want to choose a different audio and subtitle language while playing a disc, you can 
also use the disc menu to make the selection.
With the unit in Stop mode, press the MENU button.
Press the  buttons to select Setup, then press the 
ENTER or  button.    
Press the  buttons to select Language Setup, then...

37
eng

  audio Setup
Setting up the SpeaKeR optionS
dynamic Compression
This is only active when a Dolby Digital signal is detected.  
on : When Movie soundtracks are played at low volume or 
from smaller speakers, the system can apply appropriate 
compression to make low-level content more intelligible 
and prevent dramatic passages from getting too loud.
off : You can enjoy the movie with the standard Dynamic 
Range. 
aV Sync
Video may look slower than the audio when the player is
connected to a...

Audio setup
38

Setting up the SpeaKeR optionS
Setting the Speaker distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay 
time of the audio signals from the front, subwoofer speakers.
With the unit in Stop mode, press the Menu button.
Press the  buttons to select Setup, then press the 
enteR or  button. 
Press the  buttons to select audio Setup, 
then press the enteR or  button.
Audio setup menu will be displayed.
Press the  buttons to select...

39
eng

  audio Setup

V-Sound (Virtual Sound)
Produces realistic sound through 2-channel audio with the aid 
of virtual effects, this gives the user the feeling they are 
listening to 5.1 channel audio.
Press the V-Sound button.
Each time the button is pressed, the selection changes as 
follows :
 V.Sound on    V.Sound oFF
dSp Function
Press the dSp button.
Each time the button is pressed, the selection changes as 
follows:
 SMaRt Sound    audio upSCaling 
  poWeR BaSS   dSp Mode oFF 
SMART SOUND :...

Display setup
40

SETTING UP THE DISPLAY OPTIONS
This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not 
work with some discs or TVs.
With the unit in Stop mode, press the MENU button.
Press the  buttons to select Setup, then press the 
ENTER or  button.
Press the  buttons to select Display Setup, then press 
the ENTER or  button.
Video setup menu will be displayed.
Press the  buttons to select the desired display option 
from the options on...