Samsung Ht Bd7200 User Manual
Have a look at the manual Samsung Ht Bd7200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 ENG ● BASIC FUNCTIONS This section introduces basic playback functions and playback by disc type. BEFORE PLAYING Turn on your TV and set it to the correct Video Input (the input the Blu-ray Home Cinema is connected to). If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the fi rst time you press the POWER button, this screen comes up: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the fi rst time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the STOP (@) button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the MENU LANGUAGE SELECTION window appears again where you can reset your preferred language. Discs which can be played on this player (For the following discs, the ability to play back may depend on recording conditions.) • BD-ROM • BD-RE • BD-R • DVD-R • DVD-RW (V mode) • CD-RW/CD-R • The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or recording conditions. Discs which cannot be played on this player. • HD DVD • DVD+RW • DVD+R • DVD-ROM • DVD-RAM • CDV • CD-ROM • CVD • CD-I • Super Audio CD(except CD layer) • CDGs play audio only, not graphics. Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and existing format discs are possible. Not all discs are compatible and not every disc will playback. For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility Notice sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer care centre. ~ ~ M` ` ` Basic functions of your Blu-ray Home Cinema MENU LANGUAGE SELECTION Press 1 for EnglishPulsar 2 para EspañolTouche 3 pour Français Macrovision : BSS41 HT-BD7200_ELS_0317-1.indd 312009-03-20 �� 7:28:06
Basic functions of your Blu-ray Home Cinema 3 ON-SCREEN MENU NAVIGATION Playing a Disc Load a disc. Place a disc gently into the tray with the disc’s label facing up. Close the compartment by pressing the PLAy button. Playback starts automatically. When you stop disc play, the player remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. This is called the "Resume" function. With some Blu-ray discs(BD-J), this function may not work. Press the STOP button twice during playback to disable the Resume function. To pause the playback, press the PAUSE button during playback. To resume, press the PLAY button. If the player is left in the stop mode more than 5 minutes without any user interface, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 30 minutes, the power will automatically turn off except during playback of an CD-DA (Automatic Power-Off Function). If no buttons are pressed on the unit or remote control for more than 5 minutes when the unit is in Pause mode, operation will stop (except for some Blu-ray Discs). 1. ~ 2. ~ M` ` ` ` ` audio subtitle DivX subtitle Disc Menu Menu TV aspect Movie Frame (24 Fs) Resolution Progressive Mode still Mode screen Message network selection cable network Wireless network Proxy nTP server network connection Test BD-liVE internet connection Video Music Photo s etup system setup language setup audio setup Display setup HDMi setup network setup Parental setup system information Time Zone clock set Power On/Off sound BD Data Management DivX(R) Registration system Update Dynamic compression aV sync Test Tone speaker Distance sound Edit anynet + (HDMi-cEc) HDMi Format BD Wise Picture Mode HDMi audio Parental lock Rating level new Password HT-BD7200_ELS_0317-1.indd 322009-03-20 �� 7:28:06
33 ENG ● BASIC FUNCTIONS sETTing THE sOUnD setting the Power On / Off Melody sound A Melody sound can be set so it is heard each time you turn the player on or off. With the unit in Stop mode, press the MENU button. Press the $% buttons to select Setup, then press the ENTER or + button. Press the $% buttons to select System Setup, then press the ENTER or + button. Press the $% buttons to select Power On/Off sound, then press the ENTER or + button. Press the $% buttons to select On or Off, then press the ENTER or + button. Press the MENU button to exit the setup menu. Using THE sEaRcH anD sKiP FUncTiOns During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. searching through a chapter or Track hgfZCV During playback, press the SEARCH ( ) button. Each time you press the SEARCH button, the playback speed will change as follows. BD-ROM, BD-RE, BD-R, DVD-VIDEO, DVD-RW, DVD-R ) X 2 ) X 4 ) X 8 ) X 16 ) X 32 ) X 128 ( X 2 ( X 4 ( X 8 ( X 16 ( X 32 ( X 128 You can scan the program in reverse. To return to normal speed playback, press the PLAy button. No sound is heard during search mode. skipping Tracks hgfZCV During playback, press the SKIP ( ) button. When playing a Blu-ray Disc/DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter. 1. 2. 3. 4. 5. 6. ~ ~ M` DVDsystem setup _language setupaudio setupDisplay setupHDMi setupnetwork setupParental setup System InformationTime Zone Clock SetPower On/Off sound : On +BD Data ManagementDivX(R) RegistrationSystem Update OnOff Music Photo setup HT-BD7200_ELS_0317-1.indd 332009-03-20 �� 7:28:09
Basic functions of your Blu-ray Home Cinema 3 slOW MOTiOn Play/sTEP MOTiOn Play slow Motion Play hgfZCV In pause or step mode, press the SLOW button on the remote control for Slow Motion play. If you press the SLOW button, * 1/8 * 1/4 * 1/2 To return to normal speed playback, press the PLAY () button. This () icon indicates an invalid button press. No sound is heard during slow mode. Slow motion operates only in the forward direction. step Motion Play hgfZCV Press the STEP button on the remote control during play for Step Motion play. Each time the button is pressed a new frame will appear. When the STEP button is pressed, the next frame will be activated. Press the PLAY () button to resume normal play. No sound is heard during step mode. Step motion operates only in the forward direction. ~ ~ M` ` ` ~ ~ ~ M` ` HT-BD7200_ELS_0317-1.indd 342009-03-20 �� 7:28:11
35
eng
SySteM Setup
Setting the CloCK
Choose your time zone
With the unit in Stop mode, press the Menu button.
Press the buttons to select Setup, then press the
enteR or button.
Press the buttons to select System Setup, then press
the enteR or button.
Press the buttons to select time Zone, then press the
enteR or button.
Use the button to place the cursor to the appropriate
time zone for your area and press the enteR button.
To set the time automatically, set the NTP server to On (see page 53).
Set the clock
To setup, follow steps 1 through 3 above.
Press the buttons to select Clock Set, then press the
enteR or button.
Press the buttons to move to “da.”(date), “hr” (hour),
“min” (minute). Set the date and time by pressing the
buttons, then press the enteR button.
1.
2.
3.
4.
5.
M
4.
5.
System setup
dVdSystem Setup Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
System InformationTime Zone Clock SetPower On/Off sound : OnBD data managementDivX(R) RegistrationSystem Update
Music Photo Setup
dVdSystem Setup Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
System InformationTime Zone Clock SetPower On/Off sound : OnTouch Key Sound : OnBD Data ManagementSystem Update
Music Photo Setup
Time Zone
London, Lisbon GMT + 00:00
Save Return
dVdSystem Setup Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
System InformationTime Zone Clock Set Power On/Off sound : OnBD data managementDivX(R) RegistrationSystem Update
Music Photo Setup
dVdSystem Setup Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
System InformationTime Zone Clock Set Power On/Off sound : OnTouch Key Sound : OnBD Data ManagementSystem Update
Music Photo Setup
JAN/01/20090101da.hr.min.
Thursday
Clock Set
Save Return
HT-BD7200_ELS_0317-2.indd 352009-03-20 �� 7:29:05
Language setup 36 SETTING UP THE LANGUAGE OPTIONS Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically every time you watch a movie. If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc menu to make the selection. With the unit in Stop mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button. Press the buttons to select Language Setup, then press the ENTER or button. Language setup menu will be displayed. Press the buttons to select the desired language option, press the ENTER or button. Audio : For the disc audio language. Subtitle : For the disc subtitles. DivX Subtitle : For the DivX subtitles. Disc Menu : For the disc menu contained on the disc Menu : For the on-screen menu of your Blu-ray Home Cinema. Press the buttons to select the desired language, then press the ENTER button. Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. The selected language will only appear if it is supported on the disc. M 1. 2. 3. 4. • • • • • 5. M System SetupLanguage SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup System SetupSystem SetupLanguage SetupLanguage SetupAudio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup dVd Music Photo Setup System SetupLanguage Setup Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Audio : Original Subtitle : AutoDivX Subtitle : WesternDisc Menu : EnglishMenu : Auto System SetupSystem SetupLanguage SetupLanguage SetupAudio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup AudioAudio: Original Subtitle : AutoSubtitle : AutoDivX Subtitle : WesternDivX Subtitle : WesternDisc Menu : EnglishDisc Menu : EnglishMenu : AutoMenu : Auto dVd Music Photo Setup System SetupLanguage Setup Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Audio : Original Subtitle : AutoDivX Subtitle : WesternDisc Menu : EnglishMenu : Auto System SetupSystem SetupLanguage SetupLanguage SetupAudio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup AudioAudio: Original Subtitle : AutoSubtitle : AutoDivX Subtitle : WesternDivX Subtitle : WesternDisc Menu : EnglishDisc Menu : EnglishMenu : AutoMenu : Auto OriginalEnglishFrançaisDeutschespañolItaliano dVd Music Photo Setup HT-BD7200_ELS_0317-2.indd 362009-03-20 �� 7:29:12
37 eng audio Setup Setting up the SpeaKeR optionS dynamic Compression This is only active when a Dolby Digital signal is detected. on : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. off : You can enjoy the movie with the standard Dynamic Range. aV Sync Video may look slower than the audio when the player is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Setting the test tone Use the Test Tone feature to check the speaker connections. With the unit in Stop mode, press the Menu button. Press the buttons to select Setup, then press the enteR or button. Press the buttons to select audio Setup, then press the enteR or button. Audio setup menu will be displayed. Press the buttons to select test tone, then press the enteR or button. Press the Red(a) button A test tone will be sent to l R lFe in order so you can make sure the speakers are set up correctly. To end the test tone, press the Red (a) button again. Press the RETURN button to return to the previous menu. When playing a BD/DVD or CD, this will work only in Stop mode. Use this function to check that each speaker is correctly connected and that there is no problem. When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is not available. • • • 1. 2. 3. • 4. 5. • 6. M Audio setup Dynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit Dynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVd Music Photo Setup dVd Dynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit dVddVddVd Dynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tonetest tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup Music Photo Setup Dynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit Dynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVdOnOff Music Photo Setup dVdDynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit dVddVddVdDynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup 0msec25msec50msec75msec100msec125msec Music Photo Setup HT-BD7200_ELS_0317-2.indd 372009-03-20 �� 7:29:24
Audio setup 38 Setting up the SpeaKeR optionS Setting the Speaker distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, subwoofer speakers. With the unit in Stop mode, press the Menu button. Press the buttons to select Setup, then press the enteR or button. Press the buttons to select audio Setup, then press the enteR or button. Audio setup menu will be displayed. Press the buttons to select Speaker distance, then press the enteR or button. Press the buttons to select the desired Speaker, then press the buttons to set the Speaker Distance. You can set the Speaker Distance between 0.3m and 9m. When done, use the buttons to select Save, then press the enteR button. If you don’t want to save your settings, use the buttons to select Cancel, then press the enteR button. Press the RETURN button to return to the previous menu. Setting the Sound edit You can adjust the balance and level for each speaker. With the unit in Stop mode, press the Menu button. Press the buttons to select Setup, then press the enteR or button. Press the buttons to select audio Setup, then press the enteR or button.Audio setup menu will be displayed. 1. 2. 3. • 4. 5. • 6. M 1. 2. 3. • Dynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit Dynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVd Music Photo Setup System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVd Dynamic Compression : On aV Sync : 50msectest tone Speaker distance Sound edit Music Photo Setup Dynamic Compression : On aV Sync : 50msectest tone Speaker distanceSound edit Dynamic Compression : OnDynamic Compression : OnaV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound editSound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVd Music Photo Setup HT-BD7200_ELS_0317-2.indd 382009-03-20 �� 7:29:33
39 eng audio Setup V-Sound (Virtual Sound) Produces realistic sound through 2-channel audio with the aid of virtual effects, this gives the user the feeling they are listening to 5.1 channel audio. Press the V-Sound button. Each time the button is pressed, the selection changes as follows : V.Sound on V.Sound oFF dSp Function Press the dSp button. Each time the button is pressed, the selection changes as follows: SMaRt Sound audio upSCaling poWeR BaSS dSp Mode oFF SMART SOUND : This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. AUDIO UPSCALING : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit). POWER BASS : POWER BASS function stresses low tones providing thudding sound effects. • • • • • Setting the Sound edit Press the buttons to select Sound edit, then press the enteR or button. Press the buttons to select the desired Speaker, then press the button to adjust the settings. When done, use the buttons to select Save, then press the enteR button. If you don’t want to save your settings, use the buttons to select Cancel, then press the enteR button. Press the RETURN butt on to return to the previous menu. adjusting Front Speaker Balance • You can select between 0, -6, and OFF. • The volume decreases as you move closer to –6. adjusting Subwoofer Speaker level • The volume level can be adjusted in steps from +6dB to 6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. 4. 5. 6. M aV Sync : 50msectest tone Speaker distanceSound edit aV Sync : 50msecaV Sync : 50msectest tone test tone Speaker distanceSpeaker distanceSound edit Sound edit System SetupLanguage Setup Audio Setup Display SetupHDMI SetupNetwork SetupParental Setup dVd Music Photo Setup HT-BD7200_ELS_0317-2.indd 392009-03-20 �� 7:29:37
Display setup 40 SETTING UP THE DISPLAY OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. With the unit in Stop mode, press the MENU button. Press the buttons to select Setup, then press the ENTER or button. Press the buttons to select Display Setup, then press the ENTER or button. Video setup menu will be displayed. Press the buttons to select the desired display option from the options on the following pages. Press the buttons to select the desired sub-menu item from a video display option, then press the ENTER button. Each video option is described in detail below. Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. tV aspect You may want to adjust the screen setting, depending on the type of television you have. (aspect ratio) • 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen a Blu-ray Disc/DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. • 4:3 Pan-Scan : Select when you want to see the 16:9 video supplied by the Blu-ray Disc/DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off). • 16:9 Wide : You can view the full 16:9 picture on your widescreen TV. • 16:9 Normal : Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected. Some aspect ratios may not be available, depending on the disc type. If you select an aspect ratio which is different than the aspect ratio of your TV screen, then the picture might appear to be distorted. 1. 2. 3. 4. 5. 6. M M dVd System SetupLanguage Setup Audio Setup Display Setup HDMI SetupNetwork SetupParental Setup Music Photo Setup TV Aspect : 16:9 Normal Movie Frame (24 Fs) : OffResolution : 1080pProgressive Mode : AutoStill Mode : AutoScreen Message : On TV AspectTV Aspect: 16:9 NormalMovie Frame (24 Fs) : OffMovie Frame (24 Fs) : OffResolution : 1080pResolution : 1080pProgressive Mode : AutoProgressive Mode : AutoStill Mode : AutoStill Mode : AutoScreen Message : OnScreen Message : On System SetupLanguage Setup Audio Setup Display Setup HDMI SetupNetwork SetupParental Setup dVd Music Photo Setup TV Aspect : 16:9 Normal Movie Frame (24 Fs) : OffResolution : 1080pProgressive Mode : AutoStill Mode : AutoScreen Message : On TV AspectTV Aspect: 16:9 NormalMovie Frame (24 Fs) : OffMovie Frame (24 Fs) : OffResolution : 1080pResolution : 1080pProgressive Mode : AutoProgressive Mode : AutoStill Mode : AutoStill Mode : AutoScreen Message : OnScreen Message : On System SetupLanguage Setup Audio Setup Display Setup HDMI SetupNetwork SetupParental Setup dVd4:3 letter Box4:3 pan-Scan16:9 Wide16:9 Normal Music Photo Setup HT-BD7200_ELS_0317-2.indd 402009-03-20 �� 7:29:46